Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Optimization of CNC-Wire Cut EDM parameters during Machining of AI/SiC-MMC based on Robust Design


Affiliations
1 Production Engineering Department, Jadavpur University, Koikata-700032, India
     

   Subscribe/Renew Journal


In the experimental study, Taguchi method, a powerful tool in the design of experiment, is used to optimize the CNC-Wire cut-EDM parameters for effective machining of Ai-SiC MMC. From experimental results and through analysis of variance (ANOVA) the significant factors are determined for metal removal rate. Mathematical model relating to the machining performance of WEDM is established using Gauss elimination method for effective machining of AI/SiC-MMC. Confirmation test results show that the developed mathematical model is appropriate for effective machining of Al/SiC MMC and the determined optimal combination of CNC-Wire cut-EDM parameters can also satisfy the real requirement in practice.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 200

PDF Views: 0




  • Optimization of CNC-Wire Cut EDM parameters during Machining of AI/SiC-MMC based on Robust Design

Abstract Views: 200  |  PDF Views: 0

Authors

A. Manna
Production Engineering Department, Jadavpur University, Koikata-700032, India
B. Bhattacharyya
Production Engineering Department, Jadavpur University, Koikata-700032, India

Abstract


In the experimental study, Taguchi method, a powerful tool in the design of experiment, is used to optimize the CNC-Wire cut-EDM parameters for effective machining of Ai-SiC MMC. From experimental results and through analysis of variance (ANOVA) the significant factors are determined for metal removal rate. Mathematical model relating to the machining performance of WEDM is established using Gauss elimination method for effective machining of AI/SiC-MMC. Confirmation test results show that the developed mathematical model is appropriate for effective machining of Al/SiC MMC and the determined optimal combination of CNC-Wire cut-EDM parameters can also satisfy the real requirement in practice.