Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Experimental Investigation on Developed One-Way Abrasive Flow Finishing Machine with Pneumatic System


Affiliations
1 Dept. of Mechanical Engineering, S.V.U. College of Engineering, Tirupati, India
     

   Subscribe/Renew Journal


Abrasive Flow Finishing is one of the important non-convectional finishing process which is used to polish, deburr and finish internal surfaces. In this process, burrs or cutting marks are removed by allowing semi-solid, abrasive dispersed putty, with pressure into the workpiece material. In the present work, a prototype of Abrasive Flow Finishing Machine (AFFM) with pneumatic system is developed and used to finish the internal surfaces of the drilled hole on AISI 304 SS material. In this there are two operations are carried out, i.e. drilling and finishing operations by Abrasive Flow Finishing (AFF). First the hole is drilled with 10 mm size on the workpiece by varying speed and feed as input parameters followed by AFF operation with a pressure of 5 bar by using silicon carbide as abrasive with an abrasive mesh size (80 & 220) and number of cycles (5 & 10) considered as input parameters. The output responses for drilling and AFF operations are considered as initial surface roughness and final surface roughness. From the experiments, it is observed that abrasive mesh size and the number of cycles are playing a significant role in the AFF operation and to improve surface finish from 30 to 40% with minimum pressure of 5 bar by using pneumatic system.


Keywords

Abrasive Flow Finishing, Pneumatic Circuit, Silicon Carbide Abrasive Slurry, AISI 304 SS, Surface Finish.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Rhodes, LJ: Abrasive flow machining and its use, Proceedings of the Non - Traditional Machining Conference, Cincinnati, OH, (1985), 111-120.

  • Jain, VK and Adsul, S: Experimental Investigation into abrasive flow machining, 'International Journal of Machine Tools and Manufacturing', vol. 40, no. 7, 2007, 1003-1021.

  • Somashekhar Hiremath, S; Vidyadhar, HM and Singaperumal, M: A Novel Approach for Finishing Internal Complex Feactures using Developed Abrasive Flow Finishing Machine, 'International Journal of Recent Advances in Mechanical Engineering', vol. 2, no. 4, 2013, 37-44.

  • Brar, BS; Walia, RS; Singh, VP and Singh, M: Development of a Robust Abrasive Flow Machining process setup, National Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, vol. 1, no. 1, 2011, 17-23.

  • Guruaja, S; Santhosh Kumar, S and Somashekhar Hiremath, S: Investigation of Abrasive Flow Finishing While Machining Convergent-Divergent Nozzle of Different Engineering Materials, 'Journal of Research in Science, Technology, Engineering and Management (JoRSTEM)', vol. 2, no. 4, 2016, 94-100, ISSN: 2456-0197.

  • Santhosh Kumar, S and Somashekhar Hiremath, S: A Review on Abrasive Flow Machining, Global Colloquium in Recent Advancement and Effectual Researches in Engineering, Science and Technology (RAEREST), vol. 25, 2016, 1297-1304.

  • Rupalika Dash and Kali Pada Maity: Modelling of Granular Pressure in Abrasive Flow Machining for a Rotary Swaging Die, 'International Journal of Pure and Applied Research in Engineering and Technology', vol. 3, no. 9, 2015, 23-29, ISSN: 2319-507X.

  • Sherrington, I and Smith, EH: Parameters for characterizing the surface topography of engineering components, 'Journal of Mechanical Engineering Sciences, Proc Instn Mech Engrs', vol. 201, 1997, 297-306.

  • Gadelmawla, ES; Koura, MM; Maksoud, TM A; Elewa, IM and Soliman, HH: Roughness Parameters, 'Journal of Material Processing Technology', vol. 123, 2002, 133-145.

  • Baraiya, R; Jain, V and Gupta, D: Abrasive Flow Machining: an area seeking for improvement, IOSR Journal of Mechanical and Civil Engineering, vol. 3, April 2016, 1-9, E-ISSN: 2278-1684, P-ISSN: 2320-334X.


Abstract Views: 291

PDF Views: 0




  • Experimental Investigation on Developed One-Way Abrasive Flow Finishing Machine with Pneumatic System

Abstract Views: 291  |  PDF Views: 0

Authors

T. Sai Kiran
Dept. of Mechanical Engineering, S.V.U. College of Engineering, Tirupati, India
K. Aruna
Dept. of Mechanical Engineering, S.V.U. College of Engineering, Tirupati, India

Abstract


Abrasive Flow Finishing is one of the important non-convectional finishing process which is used to polish, deburr and finish internal surfaces. In this process, burrs or cutting marks are removed by allowing semi-solid, abrasive dispersed putty, with pressure into the workpiece material. In the present work, a prototype of Abrasive Flow Finishing Machine (AFFM) with pneumatic system is developed and used to finish the internal surfaces of the drilled hole on AISI 304 SS material. In this there are two operations are carried out, i.e. drilling and finishing operations by Abrasive Flow Finishing (AFF). First the hole is drilled with 10 mm size on the workpiece by varying speed and feed as input parameters followed by AFF operation with a pressure of 5 bar by using silicon carbide as abrasive with an abrasive mesh size (80 & 220) and number of cycles (5 & 10) considered as input parameters. The output responses for drilling and AFF operations are considered as initial surface roughness and final surface roughness. From the experiments, it is observed that abrasive mesh size and the number of cycles are playing a significant role in the AFF operation and to improve surface finish from 30 to 40% with minimum pressure of 5 bar by using pneumatic system.


Keywords


Abrasive Flow Finishing, Pneumatic Circuit, Silicon Carbide Abrasive Slurry, AISI 304 SS, Surface Finish.

References