Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Challenges and Research Opportunities in Metal Additive Manufacturing


Affiliations
1 Central Manufacturing Technology Institute(CMTI), Tumkur road, Bengaluru, India
     

   Subscribe/Renew Journal


Additive manufacturing has changed the way products are designed, manufactured and distributed to the consumers. It has made possible to create products previously thought too complex. Aerospace, medical, automotive and energy sectors started using additive manufacturing as they realised its potential innovation, financial and efficiency benefits. Despite the progress, there are still challenges that must be addressed, including improving the throughput, Accuracy and repeatability, surface roughness, mechanical properties, establishing standards and protocols, modelling and simulation to reduce the residual stress, certification and reducing the raw material cost. This article gives insights into the present barriers hindering the widespread adoption and research opportunities in metal additive manufacturing.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Industry News, Metal AM, vol. 2, no. 4, Winter 2016.

  • Jing Li, Conor Myant, Billy Wu, 2016 “The current Landscape for additive manufacturing Research”, 2016 ICL AMN Report, Imperial College London.

  • William E. Frazier, 2014 “Metal Additive Manufacturing: A Review” Journal of material Engineering and Performance, vol. 23, no. 6, pp 1917–1928.

  • System and Method for high power diode based additive manufacturing. Patent Pub. No. US 0252687, Pub. Date: 2014

  • https://www.xjet3d.com.

  • Gustavo Tapia,Alaa Elwany, 2014 “A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing” Journal of Manufacturing Science and Engineering, vol. 136, no. 6.

  • Jason M. Weaver, T.J. Barton, John Linn, Derrik Jenkins and Michael P. Miles, 2018 “Quantifying accuracy of a concept laser metal additive machine through the NIST test artefact” Rapid Prototyping Journal.

  • Rochus P, Collette J.P, Crahay J, Jochem H, Larnicol M, Magnien J, Masse C, Rigo O, VanhumbeeckJ.F, and Pambaguian L, 2015 “Surface engineering for parts made by additive manufacturing”, conference paper, 66th International Astronautical Congress, Jerusalem, Israel


Abstract Views: 278

PDF Views: 0




  • Challenges and Research Opportunities in Metal Additive Manufacturing

Abstract Views: 278  |  PDF Views: 0

Authors

B. N. Manjunath
Central Manufacturing Technology Institute(CMTI), Tumkur road, Bengaluru, India
A. R. Vinod
Central Manufacturing Technology Institute(CMTI), Tumkur road, Bengaluru, India
S. K. Verma
Central Manufacturing Technology Institute(CMTI), Tumkur road, Bengaluru, India
N. Balashanmugam
Central Manufacturing Technology Institute(CMTI), Tumkur road, Bengaluru, India

Abstract


Additive manufacturing has changed the way products are designed, manufactured and distributed to the consumers. It has made possible to create products previously thought too complex. Aerospace, medical, automotive and energy sectors started using additive manufacturing as they realised its potential innovation, financial and efficiency benefits. Despite the progress, there are still challenges that must be addressed, including improving the throughput, Accuracy and repeatability, surface roughness, mechanical properties, establishing standards and protocols, modelling and simulation to reduce the residual stress, certification and reducing the raw material cost. This article gives insights into the present barriers hindering the widespread adoption and research opportunities in metal additive manufacturing.

References