Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Issues in Dual Material Fused Deposition Modelling with Polycarbonate-Acrylonitrile Butadiene Styrene (PC-ABS) on a Desktop 3D Printer


Affiliations
1 Department of Mechanical Engineeing, Lokmanya Tilak College of Engineering, Navi Mumbai, India
     

   Subscribe/Renew Journal


Additive Manufacturing encompasses a complete range of technologies where parts are fabricated by material addition essentially layer by layer. Fused Deposition Modelling (FDM),being a cost-effective technique, is one of the popular additive manufacturing technologies. Owing to the simplicity of its material delivering system, FDM is capable of manufacturing parts in multiple materials and is known as “Multiple Material Extrusion Technology”. Polycarbonate is the strongest known material as far as FDM is concerned but difficult to manufacture using a desktop 3D printer due to difficulties in processability. By using multiple extrusion of Acrylonitrile Butadiene Styrene with Polycarbonate, this paper aims to explore the possibilities of fabricating composite parts in situ on a desktop 3D printer.

Keywords

Fused Deposition Modelling, Multi Material Extrusion Technology, Polycarbonate - Acrylonitrile Butadiene Styrene.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Wohlers, Terry and Gornet, Tim: History of additive manufacturing, Wohlers Associates, INC, 2016.

  • Pham, DT; Gault, RS: A comparison of rapid prototyping technologies, 'International Journal of Machine Tools and Manufacture', vol. 38, no. 10-11, 1998, 1257-1287.

  • Bourell, David; Kruth, Jean Pierre; Leu, Ming; Levy, Gideon; Rosen, David; Beese, Allison M; Clare, Adam: Materials for additive manufacturing, CIRP Annals, vol. 66, no. 2, 2017, 659-681.

  • K. T. D. T; A. A. M. Mansour, Mechanical and Dynamic Behavior of Fused Filament Fabrication 3D Printed Polyethylene Terephthalate Glycol Reinforced with Carbon Fibers, Polymer-Plastics Technology and Engineering , vol. 57, no. 16, 2018, 1715-1725.

  • Kumar, JKS: Composites by rapid prototyping technology, 'Materials & Design', vol. 31, no. 2, 2010, 850-856.

  • Wang, Xin; Jian, Man; Zhou, Zuowan, Gou, Jihua; Huic, David: 3D printing of polymer matrix composites: A review and prospective, Composites Part B: Engineering, vol. 110, no. 1, 2017, 442-458.

  • Kim, Heechang; Park, Eunju; Kim, Suhyun; Park, Bumsoo; Kim, Namhun; Lee, Seungchul: Experimental Study on Mechanical Properties of Single- and Dual-Material 3D Printed Products, 'Procedia Manufacturing', vol. 10, 2017, 887-897.

  • Vaezi, Mohammad; Chianrabutra, Srisit; Mellor, Brian & Yang, Shoufeng: Multiple material additive manufacturing – Part 1: a review, Virtual and Physical Prototyping, vol. 8, no. 1, 19-50, 2013.

  • Min, James; Mosadegh, Bobak; Dunham, Simon; Al'Aref, Subhi Jamal: Multimaterial Cardiovascular Printing, in 3D Printing Applications in Cardiovascular Medicine, New York, Academic Press, 2018, 300.

  • Sugavaneswaran, M; Arumaikkannu, G: Modelling for randomly oriented multi material additive manufacturing component and its fabrication, Materials and Design, vol. 54, 2014, 779-785.

  • Espalin, David; Ramirez, Jorge Alberto; Medina, Francisco; Wicker, Ryan: Multi-material, multitechnology FDM: exploring build process variations, 'Rapid Prototyping Journal', vol. 20, no. 3, 236-244, 2014.

  • MacDonald, Eric; Wicker, Ryan: Multiprocess 3D printing for increasing component functionality, Science, 30 September 2016.

  • Lee, Jian-Yuan; An, Jia; Chua, Chee Kai: Fundamentals and applications of 3D printing for novel materials, 'Applied Materials Today', vol. 7, 2017, 120-133.

  • Sarange Shreepad, WR: New Revolutionary Ideas of Material Processing – A Path to Biomaterial Fabrication by Rapid Prototyping, 'Procedia - Social and Behavioral Sciences', vol. 195, 2015, 2761 - 2768.

  • Rutz, Alexandra L; Hyland, Kelly E; Jakus, Adam E; Burghardt, Wesley R; Shah, Ramille N: A Multimaterial Bioink Method for 3D Printing Tunable, Cell‐Compatible Hydrogels, Advanced materials, vol. 27, no. 9, 1607-1614, 2015.

  • S. R. D. D. R. G. L. D. J. A. A. Y. A. J. S. C. K. P. G. I. Jason T Cantrell, Experimental characterization of the mechanical properties of 3DPrinted Experimental characterization of the mechanical properties of 3D Printed, vol. 23, no. 4, 2017.


Abstract Views: 293

PDF Views: 0




  • Issues in Dual Material Fused Deposition Modelling with Polycarbonate-Acrylonitrile Butadiene Styrene (PC-ABS) on a Desktop 3D Printer

Abstract Views: 293  |  PDF Views: 0

Authors

Hetal Purohit
Department of Mechanical Engineeing, Lokmanya Tilak College of Engineering, Navi Mumbai, India
J. J. Dange
Department of Mechanical Engineeing, Lokmanya Tilak College of Engineering, Navi Mumbai, India

Abstract


Additive Manufacturing encompasses a complete range of technologies where parts are fabricated by material addition essentially layer by layer. Fused Deposition Modelling (FDM),being a cost-effective technique, is one of the popular additive manufacturing technologies. Owing to the simplicity of its material delivering system, FDM is capable of manufacturing parts in multiple materials and is known as “Multiple Material Extrusion Technology”. Polycarbonate is the strongest known material as far as FDM is concerned but difficult to manufacture using a desktop 3D printer due to difficulties in processability. By using multiple extrusion of Acrylonitrile Butadiene Styrene with Polycarbonate, this paper aims to explore the possibilities of fabricating composite parts in situ on a desktop 3D printer.

Keywords


Fused Deposition Modelling, Multi Material Extrusion Technology, Polycarbonate - Acrylonitrile Butadiene Styrene.

References