Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Regression Model for Surface Roughness on EDM using Al6061 + SiC, Copper and Brass Tools


Affiliations
1 Department of Mechanical Engineering, JNTUH College of Engineering, Hyderabad, Kukatpally, India
2 Department of Mechanical Engineering, MVSR Engineering College, Nadergul, Hyderabad, India
     

   Subscribe/Renew Journal


Electrical Discharge Machining (EDM) is one of the electrical energy based Modern Machining Technique. where electrical energy is directly used to remove or cut the metals. In the present work experiments are conducted on EDM using Al6061+SiC(3%,6%,9%), Copper and Brass materials as electrodes and EN8 steel as work material. Discharge current (IP), pulse on time (TON), pulse off time (TOFF) are selected as process parameters, Surface Roughness (SR), Tool Wear Rate (TWR) as response. Taguchi design of experiment is used to find the influence of process parameters on response and a mathematical model is developed. Percentage contribution of each factor is determined.

Keywords

Discharge Current(IP), Pulse on Time (TON), Pulse Off Time (TOFF), Surface Roughness, EDM.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Sushil Kumar Choudhary: Current Advanced Research Development of Electric Discharge Machining (EDM), 'International Journal of Research in Advent Technology', vol. 2, no. 3 (E-ISSN: 2321-9637), 2014, 273-274

  • Ho, KH; Newman, ST: State of the art electrical discharge machining (EDM), 'International Journal of Machine Tools & Manufacture', 43, 2003, 1287-1300.

  • Rao, P Srinivasa; Reddy, Sidda B; Kumar, JS and Reddy, KVK: Fuzzy modelling for electrical discharge machining of AISI 304 stainless steel, 'Journal of Applied Sciences Research', 6 (11), 2010, 1687-1700.

  • Tomadi, SH; Hassan, MA; Hamedon, Z; Daud, R; Khalid, AG: Analysis of the influence of EDM parameters on surface quality, material removal rate and electrode wear of tungsten carbide. In Proceedings of the International Multi Conference of Engineers and Computer Scientists, 2009, Mar 18, vol. 2, 18-20.

  • Wansheng, Zhao; Zhenlong, Wang; Shichun, Di; Guanxin, Chi; Hongyu, Wei: Ultrasonic and electric discharge machining to deep and small hole on titanium alloy, 'Journal of Materials Processing Technology', 120, 2002, 101-106.

  • Çaydas, Ulas & Hasçalik, Ahmet: Modeling and analysis of electrode wear and white layer thickness in die-sinking EDM process through response surface methodology, 'Int J Adv Manuf Technol', 2008, 38:1148–1156.

  • Yu, ZY; Rajurkar, KP and Shen, H: High Aspect Ratio and Complex Shaped Blind Micro Holes by Micro EDM, University of Nebraska-Lincoln, USA, 2002.

  • Appa Rao, G; Mahendra Kumar, Srinivas, M; Sarma, DS: Effect of standard heat treatment on the microstructure and mechanical, 2003.

  • Kuppan, P & Rajadurai, A & Narayanan, S: Influence of EDM process parameters in deep hole drilling of Inconel 718, 'Int J Adv Manuf Technol', 2008, 38:74–84. properties of hot isostatically pressed superalloy inconel 718. 'Materials Science and Engineering A355', 2003, 114/125.

  • Spedding, TA and Wang, ZQ: Study on modeling of wire EDM process, 'Journal of Materials Processing Technology', 69, 1997, 8- 28

  • Salonitis, K; Stournaras, A; Stavropoulos, P & Chryssolouris, G: Thermal modelling of the material removal rate and surface roughness for die-sinking EDM, 'Int J Adv Manuf Technol', 2009, 40:316-323.

  • Ankur Srivastava; Kumar Abhishek; Surav Datta; Chandramani Upadhyaya; Siba Sankar Mahapatra: Effect of variation of electrode material on machining performance of Al 6061 during EDM operation, Department of Mechanical Engineering FST, IFHE, Hyderabad, INDIA Department of Mechanical Engineering National Institute of Technology, Rourkela, Odisha, India.

  • Arunkumar, N; Shareef, H; Rawoof, Abdur and Vivek, R: Investigation on the Effect of Process Parameters for Machining of EN31 (Air Hardened Steel) By EDM, International Journal of Engineering Research and Applications (IJERA), ISSN: 2248-9622, vol. 2, no. 4, July-August 2012, 1111-1121.

  • Patel, VD; Patel, CP; Patel, UJ: Analysis of Different Tool Material on MRR and Surface Roughness of Mild Steel In EDM, 'International Journal of Engineering Research and Applications (IJERA)', ISSN:2248-9622, vol. 1, no. 3, 394-397.

  • Manish Vishwakarma; Khare, VK; Parashar, Vishal: Response Surface approach for optimization of Sinker EDM process parameters on AISI 4140 alloy steel, 'International Journal of Engineering Research and Applications (IJERA)', vol. 2, no. 4, July-August 2012.

  • Sandeep: Metal Removal Rate Optimization in Electric Discharge Machining Process, 'International Journal of Enhanced Research in Science Technology & amp; Engineering', ISSN: 2319-7463, vol. 3, no. 10, October 2014.

  • Prashant Yadava; Dixit, Avdesh Chandra; Jitendra Kumar Verma: Optimization of EDM Parameter of High Carbon-High Chromium Steel (AISI D3) by using Brass Electrode, 'International Journal of Engineering Trends and Technology (IJETT)', vol. 34, no. 3, April 2016 .

  • Shankar, P; Boopathi, R and Prabu, M: Investigating the Effect of Brass Electrode on Inconel 718 on Electrical Discharge Machine, 'IJISET - International Journal of Innovative Science, Engineering & Technology', vol. 2, no. 4, April 2015.

  • Sandeep Kumar; Ramola, Ishwar Chand; Ranjeet Kumar: Analysis of Surface Roughness and Material Removal Rate for High Carbon High Chromium Steel on Die Sinking EDM using Taguchi Technique, 'International Journal of Mechanical Engineering (SSRG-IJME) – EFES' April 2015.

  • Nayan Patel: Review on Importance of Electrodes in Electrical Discharge Machining Process, International 'Journal of Research in Aeronautical and Mechanical Engineering'.

  • Samruddhi Rao; Pragati Samant; Athira Kadampatta; Reshma Shenoy: An Overview Of Taguchi Method: Evolution, Concept and Interdisciplinary Applications, 'International Journal of Scientific and Engineering Research', 2013.

  • Bolboaca, Sorana D and Jantschi, Lorentz: Design of Experiments: Useful Orthogonal Arrays for Number of Experiments from 4 to 6, 'Entropy', vol. 9, 2007, 198-232.

  • Ojha, Kuldeep; Garg, RK; Singh, KK: 'Journal of Minerals & Materials Characterization & Engineering', vol. 9, no. 8, 709-739, 2010, jmmce.org.

  • Arun Kumar; RP Swamy: Evaluation of mechanical properties of Al6061, flyash and E-glass fiber reinforced hybrid metal matrix composites, 2011/5ARPN 'Journal Of Engineering and Applied Sciences', vol. 6, no. 5, 40-44 .

  • Ashwani Kharola: Analysis of Various machining parameters of EDM on Hard Steel using copper and Aluminium electrodes (March 2015) have studied the process parameters on EDM using Copper, Aluminium electrodes and EN8 work material 2015/3/1, JEM, vol. 5, 1-14 .

  • Laxman, J; Gururaj, K: Modeling and Analysis of EDM process parameters using Taguchi technique and Fuzzy based modeling, 'International Journal of Advanced Mechanical Engineering', ISSN 2250-3234, vol. 4, no. 5, 2014, 473-480.

  • Jeevamalar, J; Ramabalan, DS: Experimental Investigations into the Effect of Process Parameters on Performance Measures of Sink EDM Process: A Review Year 2011 To 2015 and Future Work, 'IJERT', ISSN: 2278-0181, IJERTV5IS010213, vol. 5, no. 01, January-2016 .

  • Mathalai Sundaram, C; Sivasubramanian, R; Sivakumar, M: An Experimental Investigation on Machining Parameters of Electrical Discharge Machining of OHNS Steel, 'IJERT', vol. 2, no. 12, December 2013.

  • Pandey, Ved Prakash; Mall, RN: Analysis of material removal rate of AlSi 304 SS in EDM process, 'IJSRD, vol. 2, no. 07, 2014, ISSN (online): 2321-0613.

  • Mehta, Mehul G; Patel, Nikul K: Temperature and thermal stress analysis of EDM, (Jan-2014), vol. 03, no. 01, Published (First Online): 23-01-2014 ISSN: 2278-0181 Publisher Name: IJERT


Abstract Views: 326

PDF Views: 0




  • Regression Model for Surface Roughness on EDM using Al6061 + SiC, Copper and Brass Tools

Abstract Views: 326  |  PDF Views: 0

Authors

B. Kishan
Department of Mechanical Engineering, JNTUH College of Engineering, Hyderabad, Kukatpally, India
B. Sudheer Prem Kumar
Department of Mechanical Engineering, JNTUH College of Engineering, Hyderabad, Kukatpally, India
S. Gajanana
Department of Mechanical Engineering, MVSR Engineering College, Nadergul, Hyderabad, India
B. Ravi Kumar
Department of Mechanical Engineering, MVSR Engineering College, Nadergul, Hyderabad, India
P. V. K. Chaitanya Kumar
Department of Mechanical Engineering, MVSR Engineering College, Nadergul, Hyderabad, India

Abstract


Electrical Discharge Machining (EDM) is one of the electrical energy based Modern Machining Technique. where electrical energy is directly used to remove or cut the metals. In the present work experiments are conducted on EDM using Al6061+SiC(3%,6%,9%), Copper and Brass materials as electrodes and EN8 steel as work material. Discharge current (IP), pulse on time (TON), pulse off time (TOFF) are selected as process parameters, Surface Roughness (SR), Tool Wear Rate (TWR) as response. Taguchi design of experiment is used to find the influence of process parameters on response and a mathematical model is developed. Percentage contribution of each factor is determined.

Keywords


Discharge Current(IP), Pulse on Time (TON), Pulse Off Time (TOFF), Surface Roughness, EDM.

References