![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltext_open_medium.gif)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltext_restricted_medium.gif)
Modelling and Analysis on Performance of ECDM Process for the Fabrication of μ-Channels on Glass through Response Surface Methodology
Subscribe/Renew Journal
The process electro-chemical discharge micro-machining can be utilized to produce micro-channels, micro-profiles, blind holes and miniature parts with ceramic, composite, quartz and glass. This research paper enlightens the development of micro-ECDM system and the influences of process variables like duty ratio (%), pulse frequency (Hz), electrolyte concentration (wt%) and applied voltage (V) on material removal rate (MRR), overcut (OC), heat affected zone (HAZ) and surface roughness (Ra) to improve the machining efficiency as well as better quality of surface integrity during micro-channel cutting on glass using spring feed mechanism in ECDM process. The mathematical models of above machining criteria are established with help of response surface methodology (RSM) and their adequacies have been justified through Analysis of Variance (ANOVA) test. This research article also emphasises on the single and multi-objective optimization to find out suitable parametric condition for micro-channel cutting on glass. MRR is found maximum at 55V/30wt%NaOH/40%/200Hz and better surface quality of μ-channel is achieved with higher machining depth at 35V/30wt%NaOH/60%/660Hz. Further, this research paper includes a qualitative analysis of micro-channels based on SEM and XRD analyses to identify the phase change, micro-cracks and presence of uncut silica debris in the channels.
Keywords
ECDM, μ-Channel, RSM, Glass.
User
Subscription
Login to verify subscription
Font Size
Information
- Basak, I; Ghosh, A: Mechanism of spark generation during electrochemical discharge machining: A theoretical model and experimental verification, 'Journal of Materials Processing Technology', vol. 62, 1996, 46-53, DOI: 10.1016/0924-0136(95)02202-3.
- Bhattacharyya, B; Doloi, B; Sorkhel, SK: Experimental investigations into electrochemical discharge machining (ECDM) of non-conductive ceramic materials, 'Journal of Materials Processing Technology', vol. 95, 1999, 145-154, DOI: 10.1016/S0924-0136(99)00318-0.
- Jain, VK; Dixit, PM & Pandey, PM: On the analysis of the electrochemical spark machining process, 'International Journal of Machine Tools & Manufacture', vol. 39, 1999, 165 – 186, DOI: 10.1016/S0890-6955(98)00010-8.
- Elhami, S & Razfar, MR: Analytical and experimental study on the integration of ultrasonically vibrated tool into the micro electro-chemical discharge drilling, 'Precision Engineering', vol. 47, 2017, 424-433, DOI: 10.1016/j.precisioneng.2016.09.015.
- Elhami, S & Razfar, MR: Effect of ultrasonic vibration on the single discharge of electrochemical discharge machining, Materials and Manufacturing Processes'', vol. 33, no. 4, 2018, 444-451, DOI:10.1080/10426914.2017.1328113.
- Singh, T & Dvivedi, A: On pressurized feeding approach for effective control on working gap in ECDM, Materials and Manufacturing Processes', vol. 33, no. 4, 2018, 462-473, DOI: 10.1080/10426914.2017.1339319.
- Tang, W; Kang, X & Zhao, W: Enhancement of electrochemical discharge machining accuracy and surface integrity using side-insulated tool electrode with diamond coating, 'Journal of Micromechanics and Microengineering', vol. 27, 2017, pp11, DOI: 10.1088/13616439aa6e94.
- Mallick, B; Sarkar, BR; Doloi, B & Bhattacharyya, B: Analysis on electrochemical discharge machining during micro-channel cutting on glass, 'International Journal of Precision Technology', vol. 7, 2017, 32-50, DOI: 10.1504/IJPTECH.2017.084554.
- Han, M; Chae, KW; Min, BK: Fabrication of high-aspect-ratio microgrooves using an electrochemical discharge micro milling process, 'Journal of Micromechanics and Microengineering', vol. 27, 2017, pp.5, DOI:10.1088/1361-6439/aa64b9.
- Hajian, M; Razfar, MR & Movahed, S: An experimental study on the effect of magnetic field orientations and electrolyte concentrations on ECDM milling performance of glass, 'Precision Engg', vol.45, 2016, 322-331, DOI:10.1016jprecisioneng.2016.01.007.
- Saranya, S; Nair, A & Ravisankar, A: Experimental investigations on the electrical and 2D-machining characteristics of an electrochemical discharge machining (ECDM) process, 'Microsystem Technologies', vol. 22, 2016, 1-9, DOI 10.1007/s00542-016-3027-8.
- Baoyang, J; Shuhuai, L; Kevin, W & Jun, N: Modeling and experimental investigation of gas film in micro-electrochemical discharge machining process, 'International Journal of Machine Tools and Manufacture', vol. 90, 2015. 8-15, DOI: 10.1016/j.ijmachtools.2014.11.006.
- Mallick, B; Sarkar, BR; Doloi, B & Bhattacharyya, B: Multi criteria optimization of electrochemical discharge micro-machining process during micro-channel generation on glass. Applied Mechanics and Materials, 592-594, 525-529, 2014, DOI: 10.4028/www.scientific.net/AMM.592-594.525
- Cao, XD; Kim, BY & Chu, CN: Hybrid micromachining of glass using ECDM and micro grinding. International Journal of Precision Engineering and Manufacturing, vol. 14 no. 1, 2013, 5-10, DOI: 10.1007/s12541-013-0001-6.
- Cheng, CP; Wu, KL; Mai, C.C; Hsu, Y.S. & Yan, B.H. (2010). Magnetic field assisted electrochemical discharge machining. Journal of Micromechanics & Microengineering, 20, 075019 (7pp), DOI: 10.1088/09601317/20/7/075019
- Sarkar, BR; Doloi, B; & Bhattacharyya, B: Experimental investigation into electrochemical discharge micro drilling on advanced ceramics. International Journal of Manufacturing Technology and Management, vol. 13, no. 2/3/4, 2008 214-225, DOI: 10.1504 IJMTM.2008.016772.
- Sarkar, B.R; Doloi, B. & Bhattacharyya, B. (2009). Investigation into the influences of the power circuit on the microelectrochemical discharge machining process. Proceedings of the Institution of Mechanical Engineers, Part B: 'Journal of Engineering Manufacture', vol. 223, no. 2, 133 –144, DOI:10.1243/09544054JEM1258.
- Zheng, ZP; Su, HC; Huang, FY & Yan, BH: (2007), The tool geometrical shape and pulse- off time of pulse voltage effects in a Pyrex glass electrochemical discharge micro drilling process, 'Journal of Micromechanics & Microengineering', vol. 17, no. 2, 265-272, DOI:10.1088/0960-1317/17/2/012.
- Sarkar, BR; Doloi, B; Bhattacharyya, B: 2006 Parametric analysis on electrochemical discharge machining of silicon nitride ceramic, 'Intl Journal Advanced Manufacturing Technology, vol. 28, no. 9, 873-881, DOI: 10.1007/s00170-004-2448-1.
- Sarkar, BR; Doloi, B; Bhattacharyya, B: Investigation on electrochemical discharge micro-machining of silicon carbide. 'Intl Journal of Material Forming and Machining Processes', vol. 4, no. 2, 2017, 29-44,. DOI: 10.4018/IJMFMP.2017070103
- Antil, P: Modelling and Multi-objective optimization during ECDM of silicon carbide reinforced epoxy composites, 'Silicon', 2019, https://doi.org/10.1007/s12633-019-00122-8.
- Ladeesh, VG & Manu, R: Performance evaluation and multi response optimization of grinding aided electrochemical discharge drilling (G ECDD) of borosilicate glass. Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 40, no. 568, 2018, 19, DOI: 10.1007/s40430-018-1489-6.
- Montgomery, DC: Design and analysis of experiments. Singapore, John Wiley & Sons, 1997
![](https://i-scholar.in/public/site/images/abstractview.png)
Abstract Views: 280
![](https://i-scholar.in/public/site/images/pdfview.png)
PDF Views: 0