Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Development and Experimental Study of Copper Selenide based Thermo-Electric Material by the Method of Powder Metallurgy


Affiliations
1 Department of Mechanical Engineering, Vemana Institute of Technology, Bangalore, Karnataka, India
2 Department of Mechanical Engineering, SV University, Tirupati, Andhra Pradesh
     

   Subscribe/Renew Journal


Copper Selenide is one of the promising single crystal thermoelectric material for power generation in low temperature range 300 - 360 K. Universal testing machine is used for pressing the Nano powder to obtain the Nano bulk samples. By using X-ray diffraction (XRD) and scanning electronic microscope (SEM) identified the structure and phase composition. This study shown that 150 kN pressing force in sample without carbon nano tubes showed ZT=1.2 at a temperature of 322K. It is also shown that thermal conductivity and power factor is mainly influencing the value of thermoelectric efficiency of the studied materials.

Keywords

Thermoelectric Materials, Nano Scale, Green Synthesis, Figure of Merit.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Pennelli, Giovanni: Review of nanostructured devices for thermoelectric applications, 'Beilstein Journal of Nanotechnology', 2014, 5, 1268–1284. doi:10.3762/bjnano.5.141.
  • Chen, Zhi-Gang; Han, Guang; Yang, Lei; Cheng, Lina; Zou, Jin: Nanostructured thermoelectric materials: Current research and future challenge, 'Progress in Natural Science: Materials International', vol. 22, no. 6, December 2012, 535-549.
  • Liu, Yufei; Zhou, Menghan; He, Jian: Towards higher thermoelectric performance of Bi 2 Te3 via defect engineering, 'Scripta Materialia', vol. 111, 15 January 2016, 39-43.
  • Kang, Stephen Dongmin; Pöhls, Jan-Hendrik; Aydemir, Umut; Qiu, Pengfei; Stoumpos, Constantinos C; Hanus, Riley; White, Mary Anne; Shi, Xun; Chen, Lidong; Kanatzidis, Mercouri G; Snyder, G Jeffrey: Enhanced stability and thermoelectric figure-of-merit in copper selenide by lithium doping, 'Materials Today Physics', vol. 1, June 2017, 7-13.
  • Ivanova, AA; Osvenskiib, VB; Sorokin, AI; Panchenko, VP; Bulat, LP; Akchurin, R Kh.: Obtaining material based on copper selenide by the methods of powder metallurgy, 'Russian Microelectronics', vol. 46, 2017, 545-550.
  • Blanc, Saniya Le: Thermoelectric generators: Linking material properties and systems engineering for waste heat recovery applications, 'Sustainable Materials and Technologies', vol. 1–2, December 2014, 26-35.
  • Zheng, Jin-cheng: Recent advances on thermoelectric materials, 'Frontiers of Physics in China', vol. 3, 2008, 269-279

Abstract Views: 313

PDF Views: 0




  • Development and Experimental Study of Copper Selenide based Thermo-Electric Material by the Method of Powder Metallurgy

Abstract Views: 313  |  PDF Views: 0

Authors

J. Subramanyam
Department of Mechanical Engineering, Vemana Institute of Technology, Bangalore, Karnataka, India
G. Bhanodaya Reddy
Department of Mechanical Engineering, SV University, Tirupati, Andhra Pradesh
B. G. Vijayasimha Reddy
Department of Mechanical Engineering, Vemana Institute of Technology, Bangalore, Karnataka, India

Abstract


Copper Selenide is one of the promising single crystal thermoelectric material for power generation in low temperature range 300 - 360 K. Universal testing machine is used for pressing the Nano powder to obtain the Nano bulk samples. By using X-ray diffraction (XRD) and scanning electronic microscope (SEM) identified the structure and phase composition. This study shown that 150 kN pressing force in sample without carbon nano tubes showed ZT=1.2 at a temperature of 322K. It is also shown that thermal conductivity and power factor is mainly influencing the value of thermoelectric efficiency of the studied materials.

Keywords


Thermoelectric Materials, Nano Scale, Green Synthesis, Figure of Merit.

References