Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Mathematical Modeling and Analysis of Hoop Stresses in Hydro-Forming Deep Drawing of n-Sided Polygonal AA1100, Galvanized Commercial Steel Cup


Affiliations
1 UCETW, Kakatiya University, Warangal, Telangana, India
2 CBIT, Osmania University, Hyderabad, Telangana, India
     

   Subscribe/Renew Journal


The main objective of this paper presents the analytical evaluation and mathematical modeling of hoop stresses of metallic cups of materials such as AA1100 and galvanized commercial steel in hydro forming deep drawing of n-sided polygonal cup. It is very important to find the magnitude of these stresses produced within the flange area. Two types of stresses will be established in the flange region. One of it is radial stress. It usually occurs radial outward from the side of the cup to the outer side of the blank material. Another is hoop stress. It can be generated in the flange. It is compressive in nature and perpendicular to the radial lines drawn to the side of the blank from the job axis. It is either parallel to the blank circumference or tangential to it. Inside of the blank material, these two stresses will be created by the use of punch for

Keywords

Hydro-Forming Deep Drawing, Hoop Stress, n-Sided Polygonal Cup.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Abedrabbo, N., Zampaloni, M. A., & Pourboghrat F. (2005). Wrinkling control in aluminum sheet hydroforming. International Journal of mechanical Sciences, 47(3), 333-358. https://doi.org/10.1016/j.ijmecsci. 2005.02.003

  • Lang, L., Danckert, J., & Nielsen, K. B. (2004). Investigation into hydrodynamic deep drawing assisted by radial pressure: Part I. Experimental observations of the forming process of aluminum alloy. Journal of Materials Processing Technology, 148(1), 119-131. https://doi.org/10.1016/j.jmatprotec.2004.01.053

  • Lang, L., Danckert J., & Nielsen, K. B. (2005). Investigation into hydrodynamic deep drawing assisted by radial pressure: Part II. Numerical analysis of the drawing mechanism and the process parameters. Journal of Materials Processing Technology, 166(1), 150-161. https://doi.org/10.1016/j.jmatprotec.2004.08.015

  • Thiruvarudchelvan, S., & Travis, F. W. (2003). Hydraulic-pressure enhanced cup-drawing processes - An appraisal. Journal of Materials Processing Technology, 140(1-3), 70-75. https://doi.org/10.1016/S0924-0136(03)00726-X

  • Thiruvarudehelvan, S., & Lewis, W. (1999). A note on hydro-forming with constant fluid pressure. Journal of Materials Processing Technology, 88(1), 51-56. https://doi.org/10.1016/S0924-0136(98)00378-1

  • Uadaykumar, R., Ravinder Reddy, P., & Sitaramaraju, A. V. (2017). Determination of Hoop Stresses in Hydro-forming Process. Materials today proceedings, 4(8), 9133-9140. https://doi.org/10.1016/j.matpr.2017.07.269

  • Yossifon, S., & Tirosh, J. (1985). Rupture instability in hydro-forming deep-drawing process. International Journal of Mechanical Sciences, 27(9), 559-570. https://doi.org/10.1016/0020-7403(85)90072-4

  • Yossifon, S., & Tirosh, J. (1988). On the Permissible Fluid-Pressure Path in Hydro-forming Deep Drawing Processes-Analysis of Failures and Experiments. Journal of Engineering for Industry, 110 (2), 146-152. https://doi.org/10.1115/1.3187863

  • Zhang, S. H., & Danckert, J. (1998). Development of hydro-mechanical deep drawing. Journal of Material Processing Technology, 83(1-3), 14-25.https://doi.org/10.1016/S0924-0136(98)00039-9


Abstract Views: 216

PDF Views: 0




  • Mathematical Modeling and Analysis of Hoop Stresses in Hydro-Forming Deep Drawing of n-Sided Polygonal AA1100, Galvanized Commercial Steel Cup

Abstract Views: 216  |  PDF Views: 0

Authors

G. Kishan
UCETW, Kakatiya University, Warangal, Telangana, India
B. V. S. Rao
CBIT, Osmania University, Hyderabad, Telangana, India

Abstract


The main objective of this paper presents the analytical evaluation and mathematical modeling of hoop stresses of metallic cups of materials such as AA1100 and galvanized commercial steel in hydro forming deep drawing of n-sided polygonal cup. It is very important to find the magnitude of these stresses produced within the flange area. Two types of stresses will be established in the flange region. One of it is radial stress. It usually occurs radial outward from the side of the cup to the outer side of the blank material. Another is hoop stress. It can be generated in the flange. It is compressive in nature and perpendicular to the radial lines drawn to the side of the blank from the job axis. It is either parallel to the blank circumference or tangential to it. Inside of the blank material, these two stresses will be created by the use of punch for

Keywords


Hydro-Forming Deep Drawing, Hoop Stress, n-Sided Polygonal Cup.

References