Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Study on Material Removal Rate and Surface Roughness using Graphene as Dielectric Additives in Micro-Electric Discharge Machining


Affiliations
1 CSIR-Central Mechanical Engineering Research Institute, Durgapur, West Bengal, India
2 Central Manufacturing Technology Institute, Tumkur Road, Bangalore, Karnataka, India
     

   Subscribe/Renew Journal


Micro-electric discharge machining is the most distinguished micro-manufacturing process for engineering micro-parts of different geometric features. The slow material removal rate owing to the low energy short-pulsed electric discharge is the major bottleneck of the process in batch scale production. This paper is an attempt to increase the material removal rate (MRR) and enhance the surface integrity in micro-EDM using graphene as an additive in dielectric liquid. Graphene sheets synthesized using Hummers method followed by reduction and subsequent heating was dispersed in hydrocarbon based dielectric liquid by ultrasonication at temperature near to the flash point. The INCONEL 718 workpiece electrode has been immersed in the graphene suspended dielectric medium where as tungsten carbide of diameter 200µm has been used as tool electrode. It has been found that the MRR increases by 47 % in terms of volume of material removed and the surface roughness reduces by 73 % for graphene additive based dielectric medium as compared with dielectric without additive.

Keywords

Micro-EDM, MRR, Surface Roughness, Graphene, Dielectric Medium.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Behrens, A., & Ginzel, J. (2003). Neuro-fuzzy process control system for sinking EDM. Journal of Manufacturing Processes, 5(1), 33-39. https://doi.org/10.1016/S1526-6125(03)70038-3

  • Chounde1, A. B., & Pawar, M. M. (2014). Study of Pulsed DC Power Supply Parameters for Micro-EDM. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engg., 3(10), 12493-12495.

  • Gangadhar, A., Shunmugam, M. S., & Philip, P. K. (1992). Pulse train studies in EDM with controlled pulse relaxation. International Journal of Machine Tools and Manufacture, 32(5):651–657.

  • Jahan, M. P., Anwar, M. M., Wong, Y. S., & Rahman, M. (2009). Nanofinishing of hard materials using micro-electrodischarge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(9). https://doi.org/10.1243/09544054JEM1470

  • Jahan, M. P., Rahman, M., & Wong, Y. S. (2010). Modelling and experimental investigation on the effect of nanopowder-mixed dielectric in micro-electrodischarge machining of tungsten carbide. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224(11), 1725–1739. https://doi.org/10.1243/09544054JEM1878

  • Kibria, G., Sarkar, B. R., Pradhan, B. B., & Bhattacharyya, B. (2010). Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti-6Al-4V alloy. International Journal of Advanced Manufacturing Technology, 48(5), 557-570.

  • Kolli, M., & Kumar, A. (2015). Effect of dielectric fluid with surfactant and graphite powder on Electrical Discharge Machining of titanium alloy using Taguchi method. Engineering Science and Technology, an International Journal, 18(4), 524-535. https://doi.org/10.1016/j.jestch.2015.03.009

  • Kurnia, W., Tan, P. C., Yeo, S. H., & Tan, Q. P. (2009). Surface roughness model for micro electrical discharge machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(3), 279-287. https://doi.org/10.1243/09544054JEM1188

  • Mahendran. S., Devarajan. R., Nagarajan, T., & Majdi, A. (2010) - A Review of Micro-EDM. Proceedings of the International MultiConference of Engineers and Computer Scientists 2010 Vol II, IMECS 2010, March 17 - 19, 2010, Hong Kong

  • Manikandan, R., & Venkatesan, R. (2012). Optimizing the machining parameters of micro EDM for Inconel 718. Journal of Applied Sciences, 12(10),971-977.

  • Nagahanumaiah, Ramkumar, J., Glumac, N., Kapoor, S. G., & Devor, R. E. (2009). Characterization of plasma in micro-EDM discharge using optical spectroscopy. Journal of Manufacturing Processes, 11(2), 82-87. https://doi.org/10.1016/j.jmapro.2009.10.002

  • Nguyen, M. D., Rahman, M., & Wong, Y. S. (2014). Development of a postprocessing approach for three-dimensional microelectrical discharge machining milling and application in simultaneous microelectrical discharge/ electrochemical milling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 228(1), 62-73. https://doi.org/10.1177/0954405413486462

  • Paul, G., Roy, S., Sarkar, S., Hanumaiah, N., & Mitra, S. (2013). Investigations on influence of process variables on crater dimensions in micro-EDM of γ-titanium aluminide alloy in dry and oil dielectric media. The International Journal of Advanced Manufacturing Technology, 65(5–8), 1009–1017. https://doi.org/10.1007/s00170-012-4235-8

  • Pradhan, B. B., & Bhattacharyya, B. (2008). Improvement in microhole machining accuracy by polarity changing technique for microelectrode discharge machining on Ti-6Al-4V. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(2), 163-173. https://doi.org/10.1243/09544054JEM959

  • Pradhan, B. B., & Bhattacharyya, B. (2009). Modelling of micro-electrodischarge machining during machining of titanium alloy Ti-6Al-4V using response surface methodology and artificial neural network algorithm. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223(6), 683-693. https://doi.org/10.1243/09544054JEM1343

  • Prakash, V., Kumar, P., Singh, P. K., Hussain, M., Das, A. K., & Chattopadhyaya, S. (2019). Micro-electrical discharge machining of difficult-to-machine materials: A review. In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233(2), 339-370. https://doi.org/10.1177/0954405417718591

  • Rajurkar K. P., & Yu Z. Y. (2000) 3D micro-EDM using CAD/CAM. CIRP Annals, 49(1), 127–130.

  • Son, S. M., Lim, H. S., Kumar, A. S., & Rahman, M. (2007). Influences of pulsed power condition on the machining properties in micro EDM. Journal of Materials Processing Technology, 190(1–3), 73-76. https://doi.org/10.1016/j.jmatprotec.2007.03.108

  • Talla, G., Gangopadhayay, S., & Biswas, C. K. (2017). State of the art in powder-mixed electric discharge machining: A review. In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 231(14), 2511-2526. https://doi.org/10.1177/0954405416634265

  • Tan, P. C., & Yeo, S. H. (2011). Investigation of recast layers generated by a powder-mixed dielectric micro electrical discharge machining processg. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225(7), 1051-1062. https://doi.org/10.1177/2041297510393645

  • Unune, D. R., & Mali, H. S. (2015). Current status and applications of hybrid micromachining processes: A review. In Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 229(10), 1681-1693. https://doi.org/10.1177/0954405414546141

  • Venkanna. M., & Chakraborty, A. K. (2014). Synthesis and characterizations of graphene oxide and reduced graphene oxide nanosheets. AIP Conf Proc., 1591, 574–576. https://doi.org/10.1063/1.4872679

  • Wang, X., Liu, Z., Xue, R., Tian, Z., & Huang, Y. (2014). Research on the influence of dielectric characteristics on the EDM of titanium alloy. The International Journal of Advanced Manufacturing Technology, 72(5), 979-987.

  • Yeo, S. H., Aligiri, E., Tan, P. C., & Zarepour, H. (2009). A new pulse discriminating system for Micro-EDM. Materials and Manufacturing Processes, 24(12), 1297-1305 https://doi.org/10.1080/10426910903130164

  • Yeo, S. H., Tan, P. C., & Kurnia, W. (2007). Effects of powder additives suspended in dielectric on crater characteristics for micro electrical discharge machining. Journal of Micromechanics and Microengineering, 17(11). https://doi.org/10.1088/0960-1317/17/11/N01

  • Yu, Z. Y., Masuzawa, T., & Fujino, M. (1998). Micro-EDM for three-dimensional cavities - Development of uniform wear method. CIRP Annals - Manufacturing Technology, 47(1). 169-172.https://doi.org/10.1016/s0007-8506(07)62810-8


Abstract Views: 157

PDF Views: 0




  • Study on Material Removal Rate and Surface Roughness using Graphene as Dielectric Additives in Micro-Electric Discharge Machining

Abstract Views: 157  |  PDF Views: 0

Authors

Arjita Das
CSIR-Central Mechanical Engineering Research Institute, Durgapur, West Bengal, India
Sudip Samanta
CSIR-Central Mechanical Engineering Research Institute, Durgapur, West Bengal, India
Sucharita Saha
CSIR-Central Mechanical Engineering Research Institute, Durgapur, West Bengal, India
Nagahanumaiah
Central Manufacturing Technology Institute, Tumkur Road, Bangalore, Karnataka, India

Abstract


Micro-electric discharge machining is the most distinguished micro-manufacturing process for engineering micro-parts of different geometric features. The slow material removal rate owing to the low energy short-pulsed electric discharge is the major bottleneck of the process in batch scale production. This paper is an attempt to increase the material removal rate (MRR) and enhance the surface integrity in micro-EDM using graphene as an additive in dielectric liquid. Graphene sheets synthesized using Hummers method followed by reduction and subsequent heating was dispersed in hydrocarbon based dielectric liquid by ultrasonication at temperature near to the flash point. The INCONEL 718 workpiece electrode has been immersed in the graphene suspended dielectric medium where as tungsten carbide of diameter 200µm has been used as tool electrode. It has been found that the MRR increases by 47 % in terms of volume of material removed and the surface roughness reduces by 73 % for graphene additive based dielectric medium as compared with dielectric without additive.

Keywords


Micro-EDM, MRR, Surface Roughness, Graphene, Dielectric Medium.

References