Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Predicting the load-bearing capability of resistance spot welded advanced high strength DP-1000 steel spot joints for automotive structural and body frame applications


Affiliations
1 4Centre for Materials Joining and Research (CEMAJOR), Annamalai University, Annamalai Nagar, Tamil Nadu, India., India
2 Centre for Materials Joining and Research (CEMAJOR), Annamalai University, Annamalai Nagar, Tamil Nadu, India., India
3 Centre for Welding and Additive Manufacturing (C-WAM), G. S. Mandal’s Maharashtra Institute of Technology, Aurangabad, Maharashtra, India., India
4 Department of Electronics and Instrumentation Engineering, Annamalai University, Annamalai Nagar, Tamil Nadu, India., India
     

   Subscribe/Renew Journal


Resistance spot welding (RSW) is used to overcome the issues in fusion welding of DP-1000 steel such as softening in heat affected zone (HAZ), solidification cracking, high thermal residual stresses and distortion. The main objective of this investigation is to develop the empirical relationships to predict the tensile shear fracture load bearing capability of spot joints for automotive applications. The three factor – three level box-behnken design (3X3-BBD) consisting ofless experiments was chosen for developing the experimental matrix. The lap tensile shear fracture load (LAP-TSFL) and cross tensile shear fracture load (CROSS-TSFL) tests were performed to determine the load bearing capability of spot joints. The empirical relationships of LAP-TSFL and CROSS-TSFL of spot joints were developed using polynomial regression equations incorporating the process parameters in coded form. Analysis of Variance (ANOVA) was executed to check the viability of developed empirical relationships for LAP-TSFL and CROSS-TSFL. The empirical relationship accurately predicted the LAP-TSFL and CROSS-TSFL capability of spot joints with less than 1% error at 95% confidence level.

Keywords

DP-1000 Steel, Resistance Spot Welding, Optimization, Tensile Shear Fracture Load.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Alves, P. H. O. M., Lima, M. S. F., Raabe, D., Sandim, H. R. Z. (2018). Laser beam welding of dual-phase DP1000 steel. Journal of Materials Processing Technology, 252,498-510.

  • Aydin, H. (2015). The mechanical properties of dissimilar resistance spot-welded DP600– DP1000 steel joints for automotive applications. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 229(5), 599-610.

  • Chabok, A., Galinmoghaddam, E., De Hosson, J. T. M., Pei, Y. T. (2019). Micromechanical evaluation of DP1000-GI dual-phase high-strength steel resistance spot weld. Journal of materials science, 54(2), 1703-1715.

  • Chabok, A., Van der Aa, E., De Hosson, J. T. M., Pei, Y. T. (2017). Mechanical behavior and failure mechanism of resistance spot welded DP1000 dual phase steel. Materials & design, 124, 171- 182.

  • Khraisat, W., Abu Jadayil, W., Al-Zain, Y., Musmar, S. E. (2018). The effect of rolling direction on the weld structure and mechanical properties of DP 1000 steel. Cogent Engineering, 5(1), 1491019.

  • Li, X., Wang, L., Yang, L., Wang, J., Li, K. (2014). Modeling of temperature field and pool formation during linear laser welding of DP1000 steel. Journal of Materials Processing Technology, 214(9), 1844-1851.

  • Pizzorni, M., Lertora, E., Mandolfino, C., Gambaro, C. (2019). Experimental investigation of the static and fatigue behavior of hybrid ductile adhesive-RS Welded joints in a DP 1000 steel. International Journal of Adhesion and Adhesives, 95, 102400.

  • Rajarajan, C., Sivaraj, P., Sonar, T., Raja, S., Mathiazhagan, N. (2022). Resistance spot welding of advanced high strength steel for fabrication of thin-walled automotive structural frames. Forces in Mechanics, 7, 100084.

  • Rocha, I. C. L., Machado, I. G. and Mazzaferro, C. C. P. (2015). Mechanical and metallurgical properties of DP 1000 steel square butt welded joints with GMAW. International journal of engineering & technology, 4(1), 26-34.

  • Xue, X., Pereira, A. B., Amorim, J., Liao, J. (2017). Effects of pulsed Nd: YAG laser welding parameters on penetration and microstructure characterization of a DP1000 steel butt joint. Metals, 7(8), 292.


Abstract Views: 195

PDF Views: 0




  • Predicting the load-bearing capability of resistance spot welded advanced high strength DP-1000 steel spot joints for automotive structural and body frame applications

Abstract Views: 195  |  PDF Views: 0

Authors

P. Rajalingam
4Centre for Materials Joining and Research (CEMAJOR), Annamalai University, Annamalai Nagar, Tamil Nadu, India., India
S. Rajakumar
Centre for Materials Joining and Research (CEMAJOR), Annamalai University, Annamalai Nagar, Tamil Nadu, India., India
V. Balasubramanian
Centre for Materials Joining and Research (CEMAJOR), Annamalai University, Annamalai Nagar, Tamil Nadu, India., India
Tushar Sonar
Centre for Welding and Additive Manufacturing (C-WAM), G. S. Mandal’s Maharashtra Institute of Technology, Aurangabad, Maharashtra, India., India
S. Kavitha
Department of Electronics and Instrumentation Engineering, Annamalai University, Annamalai Nagar, Tamil Nadu, India., India

Abstract


Resistance spot welding (RSW) is used to overcome the issues in fusion welding of DP-1000 steel such as softening in heat affected zone (HAZ), solidification cracking, high thermal residual stresses and distortion. The main objective of this investigation is to develop the empirical relationships to predict the tensile shear fracture load bearing capability of spot joints for automotive applications. The three factor – three level box-behnken design (3X3-BBD) consisting ofless experiments was chosen for developing the experimental matrix. The lap tensile shear fracture load (LAP-TSFL) and cross tensile shear fracture load (CROSS-TSFL) tests were performed to determine the load bearing capability of spot joints. The empirical relationships of LAP-TSFL and CROSS-TSFL of spot joints were developed using polynomial regression equations incorporating the process parameters in coded form. Analysis of Variance (ANOVA) was executed to check the viability of developed empirical relationships for LAP-TSFL and CROSS-TSFL. The empirical relationship accurately predicted the LAP-TSFL and CROSS-TSFL capability of spot joints with less than 1% error at 95% confidence level.

Keywords


DP-1000 Steel, Resistance Spot Welding, Optimization, Tensile Shear Fracture Load.

References