Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Experimental Analysis of Brazed Diamond Dresser Using Single Grit Scratch on Zirconia Ceramic


Affiliations
1 Indian Institute of Technology Delhi, New Delhi, India., India
     

   Subscribe/Renew Journal


The overall performance of the grinding wheel is difficult to analyze, as it is a compilation of individual abrasive grit contributions. The single grit scratch test is useful to investigate the effect of the individual grit effect on the work material. A vacuum-brazed diamond dresser is developed for the single grit scratch experiment. Partially stabilized zirconia is used as work material to study the mechanics of material removal and mode of grit failure. The experiments were performed in dry conditions by varying the wheel speed, table feed, and depth of cut. The grit failure mechanism has been analyzed using a scanning electron microscope image and correlated with the induced force during the scratch test. The results show that the diamond microcracking was observed after 370 mm of grinding scratch marks. And the maximum tangential and normal force withstand by the diamond grit is 13.09 N and 19.65N, respectively.

Keywords

Single Grit Scratch, Ceramics, Force Analysis.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Anand, P., Arunachalam, N., & Vijayaraghavan, L. (2019). Evaluation of grinding strategy for bioceramic material through a single grit scratch test using force and acoustic emission signals. Journal of Manufacturing Processes, 37, 457-469. https://doi.org/10.1016/j.jmapro.2018.12.006

  • Buhl, S., Leinenbach, C., Spolenak, R., & Wegener, K. (2013). Failure mechanisms and cutting characteristics of brazed single diamond grains. International Journal of Advanced Manufacturing Technology, 66(5-8), 775-786. https://doi.org/10.1007/s00170-012-4365-z

  • Denkena, B., Wippermann, A., Busemann, S., Kuntz, M., & Gottwik, L. (2018). Comparison of residual strength behavior after indentation, scratching and grinding of zirconia-based ceramics for medical-technical applications. Journal of the European Ceramic Society, 38(4), 1760-1768. https://doi.org/10.1016/j. jeurceramsoc.2017.11.042

  • Denry, I., & Kelly, J. R. (2008). State of the art of zirconia for dental applications. Dental Materials, 24(3), 299-307. https://doi.org/10.1016/j. dental.2007.05.007

  • Flanders, L. A., Quinn, J. B., Wilson, O. C., & Lloyd, I. K. (2003). Scratch hardness and chipping of dental ceramics under different environments. Dental Materials, 19(8), 716-724. https://doi. org/10.1016/S0109-5641(03)00018-6

  • Lee, S. K., Tandon, R., Readey, M. J., & Lawn, B. R. (2000). Scratch damage in zirconia ceramics. Journal of the American Ceramic Society, 83(6), 1428-1432. https://doi. org/10.1111/j.1151-2916.2000.tb01406.x

  • Matsuo, T., Toyoura, S., Oshima, E., & Ohbuchi, Y. (1989). Effect of Grain Shape on Cutting Force in Superabrasive Single-Grit Tests. CIRP Annals - Manufacturing Technology, 38(1), 323-326. https://doi.org/10.1016/S0007-8506 (07)62714-0

  • Naskar, A., Choudhary, A., & Paul, S. (2020). Wear mechanism in high-speed superabrasive grinding of titanium alloy and its effect on surface integrity. Wear, 462-463(September), 203475. https://doi.org/10.1016/j.wear.2020.203475

  • Ohbuchi, Y., & Matsuo, T. (1991). Force and Chip Formation in Single-Grit Orthogonal Cutting with Shaped CBN and Diamond Grains. CIRP Annals - Manufacturing Technology, 40(1), 327-330. https://doi.org/10.1016/S0007-8506 (07)61998-2


Abstract Views: 100

PDF Views: 0




  • Experimental Analysis of Brazed Diamond Dresser Using Single Grit Scratch on Zirconia Ceramic

Abstract Views: 100  |  PDF Views: 0

Authors

Hardik A. Patel
Indian Institute of Technology Delhi, New Delhi, India., India
Harish Kumar
Indian Institute of Technology Delhi, New Delhi, India., India
Sudarsan Ghosh
Indian Institute of Technology Delhi, New Delhi, India., India
Sunil Jha
Indian Institute of Technology Delhi, New Delhi, India., India

Abstract


The overall performance of the grinding wheel is difficult to analyze, as it is a compilation of individual abrasive grit contributions. The single grit scratch test is useful to investigate the effect of the individual grit effect on the work material. A vacuum-brazed diamond dresser is developed for the single grit scratch experiment. Partially stabilized zirconia is used as work material to study the mechanics of material removal and mode of grit failure. The experiments were performed in dry conditions by varying the wheel speed, table feed, and depth of cut. The grit failure mechanism has been analyzed using a scanning electron microscope image and correlated with the induced force during the scratch test. The results show that the diamond microcracking was observed after 370 mm of grinding scratch marks. And the maximum tangential and normal force withstand by the diamond grit is 13.09 N and 19.65N, respectively.

Keywords


Single Grit Scratch, Ceramics, Force Analysis.

References