Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Experimental Research on the Effects of Machine Process Parameters on the Compressive and Flexural Strength of PLA Material Printed Using FDM


Affiliations
1 S. V. U. College of Engineering Tirupati, India
     

   Subscribe/Renew Journal


Polylactic acid (PLA), also known as polylactide, is a thermoplastic polyester that is commonly used in Fused deposition modeling (FDM) 3D printing and is considered one of the world's far more widely used bio-plastics. PLA is considered biodegradable and environmentally beneficial, unlike petrochemical-based polymers. This is a low-cost product that could be used in a variety of applications, including food packaging, tissue scaffolding, and biomedical devices. This proposed study is primarily concerned with an in-depth investigation of polylactic acid's mechanical strength and its optimization. The L-9 orthogonal array is adopted by utilizing the Taguchi design of experiments, with input characteristics such as Printing speed, Infill density, and Layer height for the fabrication of nine different sets of flexural and compressive specimens as per ASTM standards using FDM. The responses such as compressive strength and flexural strength are optimized using Taguchi Analysis – S/N Ratios and ANOVA. Similarly, this research reveals a statistical link between input elements and responses. According to the current study, the ideal parameter levels for Flexural and Compression strengths have been found and confirmation Tests have also been conducted according to the optimized process parameter levels as obtained in the Taguchi analysis.

Keywords

Polylactic Acid (PLA), 3D Printing, Fused Deposition Modeling (FDM), Additive Manufacturing (AM)
User
Subscription Login to verify subscription
Notifications
Font Size

  • Armentano, I., Bitinis, N., Fortunati, E., Mattioli, S., Rescignano, N., Verdejo, R., Lopez-Manchado, M. A., & Kenny, J. M. (2013). Multifunctional nanostructured PLA materials for packaging and tissue engineering. Progress in Polymer Science, 38(10-11), 1720-1747. https://doi.org/10.1016/jprogpolymsci.2013.05.010 2. Dev, S., & Srivastava, R. (2019). Experimental investigation and optimization of FDM process parameters for material and mechanical strength. Materials Today: Proceedings, 26, 1995-1999. https://doi.org/10.1016/j.matpr.2020.02.435

  • Hamad, K., Kaseem, M., Yang, H. W., Deri, F., & Ko, Y. G. (2015). Properties and medical applications of polylactic acid: A review. Express Polymer Letters, 9(5), 435-455. https://doi.org/10.3144/ expresspolymlett.2015.42

  • Hikmat, M., Rostam, S., & Ahmed, Y. M. (2021). Investigation of tensile property-based Taguchi method of PLA parts fabricated by FDM 3D printing technology. Results in Engineering, 11. https://doi. org/10.1016/j.rineng.2021.100264

  • Kumar, M. A., Khan, M. S., & Mishra, S. B. (2020). Effect of machine parameters on strength and hardness of FDM printed carbon fiber reinforced PETG thermoplastics. Materials Today: Proceedings, 27, 975-983. https://doi.org/10.1016/j. matpr.2020.01.291

  • Lee, B. H., Abdullah, J., & Khan, Z. A. (2005). Optimization of rapid prototyping parameters for production of flexible ABS object. Journal of Materials Processing Technology, 169(1), 54-61. https://doi. org/10.1016/j.jmatprotec.2005.02.259

  • Lee, C. S., Kim, S. G., Kim, H. J., & Ahn, S. H. (2007). Measurement of anisotropic compressive strength of rapid prototyping parts. Journal of Materials Processing Technology, 187-188, 627-630. https:// doi.org/10.1016/j.jmatprotec.2006.11.095

  • Liu, X., Zhang, M., Li, S., Si, L., Peng, J., & Hu, Y. (2017). Mechanical property parametric appraisal of fused deposition modeling parts based on the gray Taguchi method. International Journal of Advanced Manufacturing Technology, 89(5-8), 2387-2397. https://doi.org/10.1007/s00170-016-9263-3

  • Mohamed, O. A., Masood, S. H., & Bhowmik, J. L. (2015). Optimization of fused deposition modeling process parameters: a review of current research and future prospects. Advances in Manufacturing, 3(1), 42-53. https://doi.org/10.1007/s40436-014-0097-7

  • Rajpurohit, S. R., & Dave, H. K. (2019). Analysis of tensile strength of a fused filament fabricated PLA part using an open-source 3D printer. International Journal of Advanced Manufacturing Technology, 101(5-8), 1525-1536. https://doi.org/10.1007/s00 170-018-3047-x

  • Shanmugasundar, G., Karthikeyan, B., Santhosh Ponvell, P., & Vignesh D, V. (2019). Optimization of Process Parameters in TIG Welded Joints of AISI 304L-Austenitic Stainless Steel using Taguchi’s Experimental Design Method. In Materials Today: Proceedings, 16(4), 1188-1195

  • Sreekumar, K., Bindhu, B., & Veluraja, K. (2021). Perspectives of polylactic acid from structure to applications. Polymers from Renewable Resources, 12(1-2), 60-74. https://doi.org/10.1177/ 20412479211008773

  • Yao, T., Ye, J., Deng, Z., Zhang, K., Ma, Y., & Ouyang, H. (2020). Tensile failure strength and separation angle of FDM 3D printing PLA material: Experimental and theoretical analyses. Composites Part B: Engineering, 188. https://doi.org/10.1016/ j.compositesb.2020.107894

  • Zhang, J., Wang, S., Qiao, Y., & Li, Q. (2016). Effect of morphology designing on the structure and properties of PLA/PEG/ABS blends. Colloid and Polymer Science, 294(11), 1779-1787. https://doi. org/10.1007/s00396-016-3940-5


Abstract Views: 107

PDF Views: 0




  • Experimental Research on the Effects of Machine Process Parameters on the Compressive and Flexural Strength of PLA Material Printed Using FDM

Abstract Views: 107  |  PDF Views: 0

Authors

P. Hema
S. V. U. College of Engineering Tirupati, India
G. Mahesh
S. V. U. College of Engineering Tirupati, India
P. Akhila Swathanthra
S. V. U. College of Engineering Tirupati, India

Abstract


Polylactic acid (PLA), also known as polylactide, is a thermoplastic polyester that is commonly used in Fused deposition modeling (FDM) 3D printing and is considered one of the world's far more widely used bio-plastics. PLA is considered biodegradable and environmentally beneficial, unlike petrochemical-based polymers. This is a low-cost product that could be used in a variety of applications, including food packaging, tissue scaffolding, and biomedical devices. This proposed study is primarily concerned with an in-depth investigation of polylactic acid's mechanical strength and its optimization. The L-9 orthogonal array is adopted by utilizing the Taguchi design of experiments, with input characteristics such as Printing speed, Infill density, and Layer height for the fabrication of nine different sets of flexural and compressive specimens as per ASTM standards using FDM. The responses such as compressive strength and flexural strength are optimized using Taguchi Analysis – S/N Ratios and ANOVA. Similarly, this research reveals a statistical link between input elements and responses. According to the current study, the ideal parameter levels for Flexural and Compression strengths have been found and confirmation Tests have also been conducted according to the optimized process parameter levels as obtained in the Taguchi analysis.

Keywords


Polylactic Acid (PLA), 3D Printing, Fused Deposition Modeling (FDM), Additive Manufacturing (AM)

References