Manufacturing Technology Today

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Mechanism of material removal on stainless steel through diamond abrasion: a molecular dynamics simulation study


Affiliations
1 Bhabha Atomic Research Centre, Mumbai, India, India
2 Homi Bhabha National Institute, Mumbai, India, India
3 Cardiff University, Cardiff, UK, India
4 BITS Pilani, Pilani India, India
5 London South Bank University, London, UK, India
     

   Subscribe/Renew Journal


A rough surface of any engineering material exhibits high surface energy which results in higher potential energy or cohesive energy of the material, and it affects both optical as well as chemical properties. In this paper, stainless steel 304 (or SS304) is selected for nano-finishing through diamond abrasive using MD simulations. It is found that the diamond abrasive creates new bonds with Cr and Fe atoms by rise in local temperature and stresses. Moreover, Ni atom diffuses inside the abrasive as it does not chemically bond with C atom. The abrasion on steel due to diamond also leads to phase transformation on both abrasive as well as the workpiece. Subsequently, the transformed phase is removed from the workpiece due to the newly formed chemical bonds, however, in the process, the abrasive particle deteriorates by phase transformation and materials loading. Thus, the present study is useful in optimising nano-finishing or nano-cutting process on stainless steel.

Keywords

Nano-Finishing, Polishing, Molecular Dynamics Simulation, Stainless Steel, Corrosion Resistance.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Bonny, G., Terentyev, D., Pasianot, R. C., Poncé, S., & Bakaev, A. (2011). Interatomic potential to study plasticity in stainless steels: the FeNiCr model alloy. Modelling and Simulation in Materials Science and Engineering, 19(8), 085008. https:// doi.org/10.1088/0965-0393/19/8/085008

  • Fatima, S., Khan, M., Jaffery, S. H. I., Ali, L., Mujahid, M., & Butt, S. I. (2015). Optimization of process parameters for plasma arc welding of austenitic stainless steel (304 L) with low carbon steel (A-36). Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230(2), 640-653. https://doi.org/10.1177/1464420715584392

  • Hu, X., Song, Z., Liu, W., Qin, F., Zhang, Z., & Wang, H. (2012). Chemical mechanical polishing of stainless steel foil as flexible substrate. Applied Surface Science, 258(15), 5798-5802. https:// doi.org/10.1016/j.apsusc.2012.02.100

  • Ranjan, P., Balasubramaniam, R., & Jain, V. K.(2018). Investigations into the mechanism of material removal and surface modification at atomic scale on stainless steel using molecular dynamics simulation. Philosophical Magazine, 98(16), 1437-1469. https://doi.org/10.1080/14 786435.2018.1439191

  • Sansone, V. (2013). The effects on bone cells of metal ions released from orthopaedic implants.

  • A review. Clinical Cases In Mineral And Bone Metabolism. https://doi.org/10.11138/ccmbm/ 2013.10.1.034

  • Shih, C.-C., Shih, C.-M., Su, Y.-Y., Su, L. H. J., Chang, M.-S., & Lin, S.-J. (2004). Effect of surface oxide properties on corrosion resistance of 316L stainless steel for biomedical applications. Corrosion Science, 46(2), 427-441. https://doi. org/10.1016/s0010-938x(03)00148-3

  • Stadler, J., Mikulla, R., & Trebin, H. (1997). IMD: A Software package for molecular dynamics studies on parallel computers. International Journal of Modern Physics C, 8, 1131-1140

  • Stukowski, A. (2009). Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool. Modelling and Simulation in Materials Science and Engineering, 18(1), 015012. https://doi.org/10.1088/0965-0393/ 18/1/015012

  • Subramaniyan, A. K., & Sun, C. T. (2008). Continuum interpretation of virial stress in molecular simulations. International Journal of Solids and Structures, 45(14-15), 4340-4346. https://doi. org/10.1016/j.ijsolstr.2008.03.016

  • Tersoff, J. (1989). Modeling solid-state chemistry: Interatomic potentials for multicomponent systems. Physical Review B, 39(8), 5566-5568.https://doi.org/10.1103/physrevb.39.5566

  • Verkhovtsev, A. V., Schramm, S., & Solov’yov, A. V. (2014). Molecular dynamics study of the stability of a carbon nanotube atop a catalytic nanoparticle. The European Physical Journal D, 68(9). https://doi.org/10.1140/epjd/e201450371-4

  • Xie, J. (2006). Atomistic Simulations and Experimental Studies of Transition Metal

  • Systems Involving Carbon and Nitrogen. Stockholm: Royal Institute of Technology.

  • Zaretsky, E. V. (2012). Rolling bearing steels – a technical and historical perspective. Materials

  • Science and Technology, 28(1), 58-69. https:// doi.org/10.1179/1743284711y.0000000043


Abstract Views: 79

PDF Views: 0




  • Mechanism of material removal on stainless steel through diamond abrasion: a molecular dynamics simulation study

Abstract Views: 79  |  PDF Views: 0

Authors

Prabhat Ranjan
Bhabha Atomic Research Centre, Mumbai, India, India
Prabhat Ranjan
Homi Bhabha National Institute, Mumbai, India, India
Anuj Sharma
Cardiff University, Cardiff, UK, India
Tribeni Roy
BITS Pilani, Pilani India, India
Tribeni Roy
London South Bank University, London, UK, India

Abstract


A rough surface of any engineering material exhibits high surface energy which results in higher potential energy or cohesive energy of the material, and it affects both optical as well as chemical properties. In this paper, stainless steel 304 (or SS304) is selected for nano-finishing through diamond abrasive using MD simulations. It is found that the diamond abrasive creates new bonds with Cr and Fe atoms by rise in local temperature and stresses. Moreover, Ni atom diffuses inside the abrasive as it does not chemically bond with C atom. The abrasion on steel due to diamond also leads to phase transformation on both abrasive as well as the workpiece. Subsequently, the transformed phase is removed from the workpiece due to the newly formed chemical bonds, however, in the process, the abrasive particle deteriorates by phase transformation and materials loading. Thus, the present study is useful in optimising nano-finishing or nano-cutting process on stainless steel.

Keywords


Nano-Finishing, Polishing, Molecular Dynamics Simulation, Stainless Steel, Corrosion Resistance.

References