Research Cell: An International Journal of Engineering Sciences

Open Access Open Access  Restricted Access Subscription Access

Study the Friction Stir Welding Process Parameters and Its Technical Aspects


Affiliations
1 Dept. of Mechanical Engineering, IET Bhaddal, Ropar, Punjab, India
 

Friction stir welding (FSW) is the modern welding process. The friction welding was invented in 1991 in UK at TWI (The welding institute) by the Wayne Thomas. This paper covers all the technical aspects. Friction stir welding is rapidly developing technique different fields of industry. A proper experimental set up can result in high quality welding. So there are different processes parameters are considered for the variation in the outcome and to optimization the welding technique. This paper explains the methodology, basic principle and the other technical aspects. This paper also covers the large advantage of friction stir welding over the earlier welding techniques. This welding uses the non-consuming tool to generate frictional heat between work pieces. This review paper describe about the various welding variables, future aspects and key problems.

Keywords

Friction Stir Welding, Process Parameters, Variables, Technique.
User
Notifications
Font Size

  • Anitesh Mukherjee, Nikuni Vasantbhai Patel, kailash chand Gurjar, Review paper on friction Stir welding and its impact on Environment, International Research journal of Engineering & technology, Vol 4, issue 3(2017), 1481- 1490.

  • Cao X, Jahazi M. Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy. J Mater Des 2011;32, 1–11.

  • Ankur S Vasava, Hemat B Patel, Bhavik Desai, A review paper on friction Stir welding process and its variable, Imperial Journal of Interdisciplinary Research, vol 3. Issue1(2017). 371-376.

  • Mistry Hiten J, Marathe Shalin P, A Review Paper on: Friction Stir Welding, International journal of Advance research in Engineering, science & Management, 2016, 1-13.

  • Rowe C.E.D. and Thomas Wayne, Advances in tooling materials for friction stir welding, TWI and Cedar Metals Ltd., 1-11.

  • FSW-Technical-Handbook, ESAB AB, Welding Automation, SE-695 81 LAXÅ, Sweden. Phone: +46 584-81000. www.esab.com.

  • Mishraa R.S., Maba Z.Y., Friction stir welding and processing, Materials Science and Engineering R 50 (2005), 1–78.

  • Tozakia Y., Uematsub Y., Tokajib K., A newly developed tool without probe for friction stir spot welding and its Performance, Journal of Materials Processing Technology 210 (2010), 844–851.

  • Nandan R., DebRoy T., Bhadeshia H.K.D.H., Recent advances in friction-stir welding – Process, weldment structure and properties, Progress in Materials Science 53(2008), 980-1023.


Abstract Views: 222

PDF Views: 0




  • Study the Friction Stir Welding Process Parameters and Its Technical Aspects

Abstract Views: 222  |  PDF Views: 0

Authors

Gurdev Singh
Dept. of Mechanical Engineering, IET Bhaddal, Ropar, Punjab, India
Tejinderpal Singh
Dept. of Mechanical Engineering, IET Bhaddal, Ropar, Punjab, India
Aman Bansal
Dept. of Mechanical Engineering, IET Bhaddal, Ropar, Punjab, India

Abstract


Friction stir welding (FSW) is the modern welding process. The friction welding was invented in 1991 in UK at TWI (The welding institute) by the Wayne Thomas. This paper covers all the technical aspects. Friction stir welding is rapidly developing technique different fields of industry. A proper experimental set up can result in high quality welding. So there are different processes parameters are considered for the variation in the outcome and to optimization the welding technique. This paper explains the methodology, basic principle and the other technical aspects. This paper also covers the large advantage of friction stir welding over the earlier welding techniques. This welding uses the non-consuming tool to generate frictional heat between work pieces. This review paper describe about the various welding variables, future aspects and key problems.

Keywords


Friction Stir Welding, Process Parameters, Variables, Technique.

References