Reason-A Technical Journal (Formerly Reason-A Technical Magazine)

Open Access Open Access  Restricted Access Subscription Access

An Experimental Study of Grinding Performances of a Mild Steel under Different Environmental Conditions using Various Types of Nozzles


Affiliations
1 Department of Mechanical Engineering, Jalpaiguri Government Engineering College, Jalpaiguri- 735102, India
 

Grinding is a mechanical metal removal process used in manufacturing industries. In this process, the material is removed from a work-piece material by an abrasive wheel. This process gives better surface finish and close tolerance. Grinding process removes material by shearing, ploughing, rubbing and brittle fracture with high- speed and a high input of energy per unit volume. The coolant or grinding fluid is used to reduce the temperature in grinding zone and also it is used as a lubricant into grinding zone. In present work, a five port multi-nozzle system has been developed and performance of this nozzle has been compared with flood type copper cooling nozzle under different environmental conditions. Two parameters (chip characteristics, surface roughness) of grinding are considered to find the suitable process for grinding of a mild steel specimen. From this experimental investigation, it can be observed that in wet condition, five port multi-nozzle system provides better surface finish as well as it is more economical.

Keywords

Five Port Multi-nozzle, Surface Roughness, Depth of Cut, Grinding, Chip, Dry Test.
User
Notifications
Font Size


  • Bhattacharyya, A., Metal Cutting - Theory and Practice, New Central Book Agency (P) Ltd., Kolkata, 1984.

  • Malkin, S., Grinding Technology-Theory and Application of Machining with Abrasives, Ellis Harwood Publication, UK, 1990.

  • Chattopadhyay, A.B., Machining and Machine Tools, Wiley India Private Limited, 2011.

  • Das, S., Sharma, A.O., Singh, S.S. and Nahate, S.V. Grinding Performance through Effective Application of Grinding Fluid, Proceedings of the International Conference on Manufacturing, pp.231-239, Dhaka, Bangladesh, 2000.

  • Rowe, W.B., Morgan, M.N., Allanson D.R., An advance in the modelling of thermal effects in the grinding process, Annals of the CZRP, Vol.40, No.1, pp.339-342, 1991.

  • Paul, S. and Chattopadhyay, A.B., A Study of Effects of Cryogenic Cooling in Grinding, International Journal of Machine Tools and Manufacture, Vol.35, No.1, pp.109-117, 1995.

  • Paul, S. and Chattopadhyay, A.B., The Effect of Cryogenic Cooling in Grinding Forces, International Journal of Machine Tools and Manufacture, Vol.36, No.1, pp.63-72, 1996.

  • Irani, R.A., Bauer, R.J. and Warkentin, A., A Review of Cutting Fluid Application in the Grinding Process, International Journal of Machine Tools and Manufacture, Vol.45, pp.1696-1705, 2005.

  • Das, S., Improving Grinding Performance through Appropriate Grinding Fluid Application, Proceedings of the National Conference on Investment Casting, Durgapur, India, pp.97-103, 2003.

  • Mandal, B., Majumdar, S., Das, S. and Banerjee, S., Formation of a Significantly Less Stiff Air Layer around a Grinding Wheel with a Rexine Leather Pasted Wheel, International Journal of Precision Technology, Vol.2, No.1, pp.12-20, 2011.

  • Mandal, B., Singh, R., Das, S. and Banerjee, S., Improving Grinding Performance by Controlling Air Flow around a Grinding Wheel, International Journal of Machine Tools and Manufacture, Vol.51, No.9, pp.670-676, 2011.

  • Mandal, B., Biswas, D., Sarkar, A., Das, S. and Banerjee, S. Grinding Performance Using a Compound Nozzle Characterized by Small Discharge of Fluid, Journal of the Association of Engineers, India, Vol.83, No.1, pp.28-35, 2013.


Abstract Views: 512

PDF Views: 175




  • An Experimental Study of Grinding Performances of a Mild Steel under Different Environmental Conditions using Various Types of Nozzles

Abstract Views: 512  |  PDF Views: 175

Authors

Suman Das
Department of Mechanical Engineering, Jalpaiguri Government Engineering College, Jalpaiguri- 735102, India
Bikash Banerjee
Department of Mechanical Engineering, Jalpaiguri Government Engineering College, Jalpaiguri- 735102, India
Nripen Mondal
Department of Mechanical Engineering, Jalpaiguri Government Engineering College, Jalpaiguri- 735102, India

Abstract


Grinding is a mechanical metal removal process used in manufacturing industries. In this process, the material is removed from a work-piece material by an abrasive wheel. This process gives better surface finish and close tolerance. Grinding process removes material by shearing, ploughing, rubbing and brittle fracture with high- speed and a high input of energy per unit volume. The coolant or grinding fluid is used to reduce the temperature in grinding zone and also it is used as a lubricant into grinding zone. In present work, a five port multi-nozzle system has been developed and performance of this nozzle has been compared with flood type copper cooling nozzle under different environmental conditions. Two parameters (chip characteristics, surface roughness) of grinding are considered to find the suitable process for grinding of a mild steel specimen. From this experimental investigation, it can be observed that in wet condition, five port multi-nozzle system provides better surface finish as well as it is more economical.

Keywords


Five Port Multi-nozzle, Surface Roughness, Depth of Cut, Grinding, Chip, Dry Test.

References





DOI: https://doi.org/10.21843/reas%2F2018%2F48-56%2F195549