Reason-A Technical Journal (Formerly Reason-A Technical Magazine)

Open Access Open Access  Restricted Access Subscription Access

Concentrated Solar Thermal Power Plant with Multi-PCM Reservoirs for Electrical Power Generation-An Idea


Affiliations
1 Mechanical Engineering Department, Jalpaiguri Government Engineering College, Jalpaiguri, India
 

Global warming is one of the most alarming threats to the whole world. A very large quantity of energy source which reaches the earth is solar energy. But the big challenge to scientists and the engineers is to store and convert this energy in the form of thermal or electrical energy. In solar power plants, the energy of the Sun is used to produce electricity. Such a plant can run only in the daytime, but if it is possible to store solar energy then it can also be used at night time. Time-dependence is the major problem of the solar thermal power plant. Thermal energy storage (TES) technology can store energy by using Phase change material (PCM) to overcome this difficulty. One viable option is the use of PCM materials that provide an efficient way of storing such energy. Initially, PCM remains in solid-state; it absorbs heat and melts into the liquid state. At night time, it releases heat and changes back to solid-state. In this work, concentrated solar power (CSP) technology, is used considering its higher efficiency. The use of PCM as latent heat storage is very effective. Three-phase change material reservoirs of different melting points have been used in series. Thermodynamic analysis has been done to find out the optimum mass flow rate of the heat transfer fluid from the low- temperature PCM reservoir. All the processes have been considered ideal.

Keywords

Thermal Energy Storage (TES), CSP Plant, Phase Change Material (PCM), Thermodynamic Analysis.
User
Notifications
Font Size


  • Steinhagen, Eng. F.R.H.M. and Trieb, F., Concentrating solar power: a review of the technology, Quarterly of the Royal Academy of Engineering, pp. 43-50, 2004.

  • Mills, D.R., Advances in solar thermal electricity technology, Solar Energy, Vol. 76, No.1-3, pp. 19-31, 2004.

  • Schnatbaum, L., Solar thermal power plants, The European Physical Journal Special Topics, Vol. 176, pp. 127-140, 2009.

  • Lovegrove, K., Watt, M., Passey, R., Pollock, G., Wyder, J. and Dowse, J., Realizing the potential of concentrating solar power in Australia, IT power Australia, Australian Solar Institute, pp. 2-273, 2012.

  • Barlev, D., Vidu, R. and Stroeve, P., Innovation in concentrated solar power, solar Energy Materials and Solar Cells, Vol. 95, No.10, pp. 2703-2725, 2011.

  • Concentrating Solar Power Projects, National Renewable Energy Laboratory, https://www.degruyter.com/view/journals/nleng/8/1/article-p10.xml, published online: May 22 2018.

  • Jankowski, N.R. and McCluskey, F.P., A review of phase change materials for vehicle component thermal buffering, Applied Energy, Vol. 113, pp. 1525-1561, 2014.

  • Atkin, P. and Farid, M.N., Improving the efficiency of photovoltaic cells using PCM infused graphite and aluminum fins, Solar Energy, Vol. 114, pp. 217-228, 2015.

  • Roman, K.K., O'Brien, T., Alvey, J.B. and Woo, O., Simulating the effects of cool roof and PCM (phase change materials) based roof to mitigate UHI (urban heat island) in prominent US cities, Energy, Vol. 96, pp. 103-117, 2016.

  • Fukahori, R., Nomura, T., Zhu, C., Sheng, N., Okinaka, N. and Akiyama, T., Macro-encapsulation of metallic phase change material using cylindrical-type ceramic containers for high temperature thermal energy storage, Applied Energy, Vol. 170, pp. 324-328, 2016.

  • Kenisarin and Murat, M., High-temperature phase change materials for thermal energy storage, Renewable and Sustainable Energy Reviews, Vol. 14, pp. 955-970, 2010.


Abstract Views: 441

PDF Views: 175




  • Concentrated Solar Thermal Power Plant with Multi-PCM Reservoirs for Electrical Power Generation-An Idea

Abstract Views: 441  |  PDF Views: 175

Authors

Bikash Banerjee
Mechanical Engineering Department, Jalpaiguri Government Engineering College, Jalpaiguri, India
Suman Das
Mechanical Engineering Department, Jalpaiguri Government Engineering College, Jalpaiguri, India
Asim Mahapatra
Mechanical Engineering Department, Jalpaiguri Government Engineering College, Jalpaiguri, India

Abstract


Global warming is one of the most alarming threats to the whole world. A very large quantity of energy source which reaches the earth is solar energy. But the big challenge to scientists and the engineers is to store and convert this energy in the form of thermal or electrical energy. In solar power plants, the energy of the Sun is used to produce electricity. Such a plant can run only in the daytime, but if it is possible to store solar energy then it can also be used at night time. Time-dependence is the major problem of the solar thermal power plant. Thermal energy storage (TES) technology can store energy by using Phase change material (PCM) to overcome this difficulty. One viable option is the use of PCM materials that provide an efficient way of storing such energy. Initially, PCM remains in solid-state; it absorbs heat and melts into the liquid state. At night time, it releases heat and changes back to solid-state. In this work, concentrated solar power (CSP) technology, is used considering its higher efficiency. The use of PCM as latent heat storage is very effective. Three-phase change material reservoirs of different melting points have been used in series. Thermodynamic analysis has been done to find out the optimum mass flow rate of the heat transfer fluid from the low- temperature PCM reservoir. All the processes have been considered ideal.

Keywords


Thermal Energy Storage (TES), CSP Plant, Phase Change Material (PCM), Thermodynamic Analysis.

References





DOI: https://doi.org/10.21843/reas%2F2018%2F57-65%2F195550