Open Access
Subscription Access
Study of the Effects of a Crack in Statically Loaded Structural Elements with the Aid of Piezosensor
This research proposes a new technique to assess an open crack or any kind of damage in a structural element. In this research work, a piezo sensor is used to assess the effect of crack in a statically loaded cantilever beam with an open crack. The study aims to lead a way through which a crack detection technique be developed to locate the crack in a structural part before severe damage. It is clearly observed that the mechanical properties rigorously get affected due to presence of a crack. Large cracks or severe damage can be detected by following modal parameters but it is dif!cult for small cracks. One more important parameter can be followed is the discontinuity in slope to detect the crack which takes place due to the crack. This research aims to lead a way to follow the discontinuity by using a piezo sensor. Since the output voltage of a piezo sensor depends on the difference in slope at the two end of it can directly give a high response to the discontinuity in slope curve. To pursue the study a !nite element integrated model is prepared in ABAQUS platform. A solid 3D model as well as a shell model is created and slope discontinuity is followed under static load as well as voltage output for different crack locations are obtained.
Keywords
Piezoelectric sensor, Crack, Voltage, Slope.
User
Font Size
Information
- Egashira, M. and Shinya, N., Local Strain Sensing Using Piezoelectric Polymer, Journal of Intelligent Materials, Systems and Structures, Vol. 4, pp.558–60, 1993.
- Sumant, P.S. and Maiti, S.K., Crack Detection in a Beam Using PZT Sensors, Smart Materials and Structures, Vol. 15, pp.695–703, 2006.
- Zhang, H., Galea, S., Chiu, W. and Lam, Y., An Investigation of Thin PVDF !lms as Fluctuating-Strain-Measuring and Damage Monitoring Devices, Smart Materials and Structures, Vol. 2, pp.208–216, 1993.
- Yin, L., Wang, X. and Shen, Y., Damage Monitoring in Composite Laminates by Piezoelectric Films, Computers & Structures, Vol. 59, pp.623–630, 1996.
- Fukunaga, H., Hu, N. and Chang, F., Structural Damage Identi!cation Using Piezoelectric Sensors, International Journal of Solids and Structures, Vol. 34, pp.393–418, 2002.
- Castillo, D., Pardo, de V.C. and Guemes, J., Structural Integrity Analysis with Piezoelectric Patches, Key Engineering Materials, Vol. 167, pp.91–101, 1999.
- Jiang, L.J., Tang, J. and Wang, K.W., An Enhanced Frequency-Shift-Based Damage Identi!cation Method Using Tunable Piezoelectric Transducer Circuitry, Smart Materials and Structures, Vol. 15, pp.799–808, 2006.
- Yan, W., Chen, W., Lim, W. and Cai, J.B., Application of EMI Technique for Crack Detection in Continuous Beams Adhesively Bonded with Multiple Piezoelectric Patches, Mechanics of Advanced Materials and Structures, Vol.15, pp.1–11, 2008.
- Narayanan, A. and Subramanian, K.V.L., Damage Assessment in Concrete Structures Using Piezoelectric Based Sensors, Revista ALCONPAT, Vol. 7, No.1, 2017. DOI:http://dx.doi.org/10.21041/ra.v7i1.173
- Reddy, M.D. and Swarnamani, S., In"uence of Stiffness and Mass Changes on Eigen Frequencies of Beam with Piezo Electric Patch, Proceedings of the 14th International Congress on Sound and Vibration (ICSV14), Cairns, Australia, July 9-12 2007.
- Lu, Y. and Li, Z., Crack Detection Using Embedded Cement-Based Piezoelectric Sensor, Proceedings of the 7th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-7), Jeju, Korea, May 23-28, 2010.
Abstract Views: 530
PDF Views: 211