Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Blasius and Sakiadis Flow of Magneto Hydrodynamic Tangent Hyperbolic Fluid with Exponentially Decaying Heat Source or Sink


Affiliations
1 Department of Mathematics, Sri Shakthi Institute of Engineering and Technology, Coimbatore-641 005, India
2 Department of Mathematics, GITAM University, Bangalore-562123, India
     

   Subscribe/Renew Journal


In this article, we have studied the flow and heat transfer in magneto hydrodynamic Tangent hyperbolic fluid with exponentially heat source/sink. The partial differential equations governing the problem have been reduced by similarity transformations into the ordinary differential equations. Numerical solutions are transferred out by using Runge-Kutta Shooting technique. The effects of various governing parameters on the flow quantities are demonstrated graphically. The solution depends on various interesting parameters including the friction factor coefficient and local Nusselt numbers for the Sakiadis and Blasius flow cases. It is determined that the rate of heat transfer is extremely high in Blasius flow case when compared with Sakiadis flow case.

Keywords

MHD, Blasisus and Sakiadis Flow, Tangent Fluid, Exponential Decaying Heat Source/Sink.
Subscription Login to verify subscription
User
Notifications
Font Size


  • H. Blasius, Grenzschichten in Flüssigkeiten mit kleiner Reibung, Z. Math. Phys. 1908; 56: 1–37.
  • B.C. Sakiadis, Boundary-layer behaviour on continuous solid surfaces: I. Boundary-layer equations for two-dimensional and axisymmetric flow, AIChE J.1961; 7: 26–28.
  • F.K. Tsou, E.M. Sparrow, R.J. Goldstein, Flow and heat transfer in the boundary layer on a continuous moving surface, Int. J. Heat Mass Transfer. 1967; 10: 1 281–288.
  • C.H. Chen, Forced convection over a continuous sheet with suction or injection moving in a flowing fluid, Acta Mech. 1999; 138: 1–11.
  • E.M. Sparrow, R. Eichhorn, J.L. Grigg, Combined forced and free convection in a boundary layer, Phys. Fluids 1959; 2: 319– 320.
  • L.E. Erickson, L.T. Fan, V.G. Fox, Heat and mass transfer on a moving continuous flat plate with suction or injection , Ind. Eng. Chem. vol. 1966; 5: 19-25.
  • S. Sandeep and C. Sulochana, Dual solutions of radiative MHD nanofluid flow over an exponentially stretching sheet with heat generation/absorption, Applied Nanoscience. 2016; 1: 131-139.
  • M.Qasim and S.Noreen, Falkner-Skan flow of a Maxwell fluid with heat transfer and magnetic field, International journal of Engineering Mathematics, 2013; 7: 13-20.
  • S. A. Gaffar, V. Ramachandra Prasad and E. Keshava Reddy, Computational study of non-Newtonian Eyring-powell fluid from a horizontal circular cylinder with Biot number effects, Int. J. Math. Archv. 2015; 6: 114-132.
  • W.A. Khan, R. Culham and O.D. Makinde, Hydromagnetic blasius flow of power‐ law nano-fluids over a convectively heated vertical plate, The Canadian Journal of Chemical Engineering, 2015; 93(10): 1830-1837.
  • C.S.K. Raju, N.Sandeep, Heat and mass transfer in MHD non-Newtonian bioconvection flow over a rotating cone/plate with cross diffusion, Journal of Molecular Liquids, 2016; 215: 115-126.
  • C.S.K. Raju, N.Sandeep, A comparative study on heat and mass transfer of the Blasius and Falkner-Skan flow of a bio-convective Casson fluid past a wedge, European Physical Journal Plus, 2011; 131: 405-411.
  • K. Gangadhar, Radiation, Heat Generation and Viscous Dissipation Effects on MHD Boundary Layer Flow for the Blasius and Sakiadis Flows with a Convective Surface Boundary Condition, Journal of Applied Fluid Mechanics, 2015; 5598(3): 562 -570.
  • K. R. Sekhar, G. Viswanatha Reddy and S. V. K. Varma, Mixed convection coquette flow of a nano-fluid through a vertical channel, Elixir International Journal, 2016; 99: 43237-43241.
  • C.S.K. Raju, K. R. Sekhar, S. M. Ibrahim, G. Lorenzini, G. Viswanatha Reddy and E. Lorenzini, Variable viscosity on unsteady dissipative Carreau fluid over a truncated cone filled with titanium alloy nano-particles, Continuum Mech.Thermodyn., 2017; DOI 10.1007/s00161-016-0552-8.

Abstract Views: 211

PDF Views: 0




  • Blasius and Sakiadis Flow of Magneto Hydrodynamic Tangent Hyperbolic Fluid with Exponentially Decaying Heat Source or Sink

Abstract Views: 211  |  PDF Views: 0

Authors

P. Priyadharshini
Department of Mathematics, Sri Shakthi Institute of Engineering and Technology, Coimbatore-641 005, India
S. Vijay Babu
Department of Mathematics, Sri Shakthi Institute of Engineering and Technology, Coimbatore-641 005, India
C. S. K. Raju
Department of Mathematics, GITAM University, Bangalore-562123, India

Abstract


In this article, we have studied the flow and heat transfer in magneto hydrodynamic Tangent hyperbolic fluid with exponentially heat source/sink. The partial differential equations governing the problem have been reduced by similarity transformations into the ordinary differential equations. Numerical solutions are transferred out by using Runge-Kutta Shooting technique. The effects of various governing parameters on the flow quantities are demonstrated graphically. The solution depends on various interesting parameters including the friction factor coefficient and local Nusselt numbers for the Sakiadis and Blasius flow cases. It is determined that the rate of heat transfer is extremely high in Blasius flow case when compared with Sakiadis flow case.

Keywords


MHD, Blasisus and Sakiadis Flow, Tangent Fluid, Exponential Decaying Heat Source/Sink.

References