Technology Spectrum Review

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Numerical Modelling and Design of Horizontal-Axis Wind Turbine Blade for Low Wind Speed Regimes


Affiliations
1 Bhubaneswar Engineering College, Bhubaneswar, Odisha, India
     

   Subscribe/Renew Journal


In this paper a set of 3 aerofoils of the NWT family designed by National Aerospace Laboratories (NAL) has been modified. The modified aerofoils are NWT 1001, NWT 2004, and NWT 2005. The main purpose of modifying is to shoot the low wind speed regimes hence to get more coefficient of lift and less coefficient of drag. These new modified aerofoils are numerically modeled, and are used to design a blade of 2.5m radius. Since aerofoils play a very important role in blade design and its enhancement in the power production of wind turbine in the low wind speed conditions makes the design unique. The comprehensive study of modified NWT aerofoils and its geometrical optimization are scrutinized to improve the coefficient of performance of the blade with the Reynolds number in the range of 250000. The Dual Evolutionary method is used to optimize the blade. The proposed design is very simple and more suitable for Indian low wind speed regimes.

Keywords

Modified NWT Aerofoils, Blade Design, Numerical Modeling, Computational Fluid Dynamics, Optimization.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Dr Haran A P, Soundranayagam, Isaac J.J: Experimental characteristics of wind turbine blading over full 0 to 360 degree angle of attack, Department of aeronautical engg. Park College of technology.

  • Development and Validation of Design Methodologies and Design Tools to Enable Wind Turbine Rotors/Blades to be Optimized for Low and Moderate Wind Regimes, Project Closure Report Submitted to Centre for Wind Energy Technology ( C-WET ).

  • Dr. David Wood, Department of Mechanical and Manufacturing Engineering DOI 10.1007/978-1-1-84996-175-2 Springer London Dordrecht Heidelberg NewYork.

  • Guido Weinzierl, A BEM Based Simulation-Tool for Wind Turbine Blades with Active Flow Control Elements

  • QBlade: An open source tool for design and simulation of horizontal and vertical axis wind turbines, International Journal of Emerging Technology and Advanced Engineering, (2013), Vol. 3, pp. 264-269

  • QBlade : an Open Source Software developed by the Hermann Föttinger Institute of TU Berlin

  • Drela, M., Giles, M., 1989, “Viscous-Inviscid Analysis of Transonic and Low Reynolds Number Aerofoils”, AIAA Journal Vol.25, No.10


Abstract Views: 414

PDF Views: 3




  • Numerical Modelling and Design of Horizontal-Axis Wind Turbine Blade for Low Wind Speed Regimes

Abstract Views: 414  |  PDF Views: 3

Authors

Amlan Das
Bhubaneswar Engineering College, Bhubaneswar, Odisha, India

Abstract


In this paper a set of 3 aerofoils of the NWT family designed by National Aerospace Laboratories (NAL) has been modified. The modified aerofoils are NWT 1001, NWT 2004, and NWT 2005. The main purpose of modifying is to shoot the low wind speed regimes hence to get more coefficient of lift and less coefficient of drag. These new modified aerofoils are numerically modeled, and are used to design a blade of 2.5m radius. Since aerofoils play a very important role in blade design and its enhancement in the power production of wind turbine in the low wind speed conditions makes the design unique. The comprehensive study of modified NWT aerofoils and its geometrical optimization are scrutinized to improve the coefficient of performance of the blade with the Reynolds number in the range of 250000. The Dual Evolutionary method is used to optimize the blade. The proposed design is very simple and more suitable for Indian low wind speed regimes.

Keywords


Modified NWT Aerofoils, Blade Design, Numerical Modeling, Computational Fluid Dynamics, Optimization.

References