Technology Spectrum Review

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

A Review Study on Electro Discharge Machining on Al-SiC Composites


Affiliations
1 Department of Mechanical Engineering, BEC, Bhubaneswar, India
     

   Subscribe/Renew Journal


Manufacturing industries are facing difficulties from newly developed, advanced materials viz. composites, ceramics and super alloys, which fall under the category of difficult-to-machine materials. To overcome these challenges, non-conventional machining processes are being employed which give better material removal rate, accuracy and surface finish. Electrical Discharge Machining (EDM) is the process in which electrically conductive materials are machined irrespective of their hardness using controlled sparks in the presence of dielectric. Aluminium Metal Matrix Composites (AMMC's) are new generation engineering materials that possess superior physical and mechanical properties compared to non-reinforced alloys. This paper presents a review of research work done on Al-SiC metal matrix composite on EDM, Wire EDM, Powder Mixed EDM, EDM in Water, Micro EDM. The paper also discusses the future scope of work in the same area.

Keywords

Electrical Discharge Machining, Metal Matrix Composites, Metal Removal Rate, Tool Wear.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Hung, N. P., Yang L. J. and Leong K. W., ―Electrical discharge machining of cast metal matrix composites􀔡, Journal of Materials Processing Technology, Vol. 44, pp 229-236, 1994.

  • Hocheng, H., Lei, W. T., Hsu H. S., ―Preliminary study of material removal in electrical-discharge machining of SiC/Al.􀔡, Journal of Materials Processing Technology. 63: 813-818, 1997.

  • Yan, B. H., Wang C. C., ―The machining characteristics of Al2O3/6061Al composite using rotary electro-discharge machining with a tube electrode􀔡, Journal of Materials Processing Technology. 95: 222-231, 1999.

  • Karthikeyan, R., Lakshmi Narayanan, P. R., Naagarazan R. S., ―Mathematical modeling for electric discharge machining of aluminum–silicon carbide particulate composites􀔡, Journal of Materials Processing Technology. 87: 59–63, 1999.

  • Wang, C. C., Yan, B. H., ―Blind-hole drilling of Al2O3/6061Al composite using rotary electro-discharge machining􀔡, Journal of Materials Processing Technology. 102: 90-102, 2000.

  • P. Narendrasingh, K. Raghukandan, M. Rathinasabapathi and B. C. Pai, ―Electric discharge machining of Al-10%SiC as cast metal matrix composites􀔡, Journal of material processing technology, Vol 155 -156, p.1653-1657, 2000.

  • Biing Hwa Yan, Che Chung Wang, Han Ming Chow and Yan Cherng Lin, ―Feasibility study of rotary electrical discharge machining with ball burnishing for Al2O3/6061Al composite􀔡, International Journal of Machine Tools and Manufacture, Vol 40, Pages 1403– 1421, 2000.

  • Ramulu, M., Paul, G., Patel J., ―EDM surface effects on the fatigue strength of a 15 vol% SiCp/Al metal matrix composite material􀔡, Composite Structures. 54 (1): 79-86, 2001.

  • Mohan, B., Rajadurai, A., Satyanarayana K. G., ―Electric discharge machining of Al–SiC metal matrix composites using rotary tube electrode􀔡, Journal of Materials Processing Technology. 153-154 (10): 978-985, 2004.

  • Narender Singh, Raghukandan K., Pai B. C., ―Optimization by Grey relational analysis of EDM parameters on machining Al–10%SiCP composites􀔡, Journal of Materials Processing Technology. 155–156: 1658–1661, 2004.

  • Seo, Y. W., Kim, D., Ramulu, M., ―Electrical discharge machining of functionally graded 15–35 vol% SiCp/Al composites􀔡, Materials and Manufacturing Processes. 21(5): 479–487, 2006.

  • Sushant Dhar, Rajesh Purohit, Nishant Saini, Akhil Sharma, Hemath Kumar, ―Mathematical modeling of electric discharge machining of cast Al–4Cu–6Si alloy–10 wt. % SiCP composites􀔡, Journal of Materials Processing Technology. 194: 24–29, 2007.

  • Akshay Dvivedi, Pradeep Kumar, Inderdeep Singh, ―Experimental investigation and optimization in EDM of Al 6063 SiCp metal matrix composite􀔡, International Journal of Machining and Machinability of Materials. 3 (3/4): 293–308, 2008.

  • Cichosz, P., Karolczak, P., ―Sinker electrical discharge machining of aluminum matrix composites􀔡, Materials Science-Poland. 26 (3): 547- 554, 2008.

  • Ahmad Aajdi, Abdul Aani, Alexis, Aouangue Aanimina, Aaiz Ahmad, ―Non-conventional machining of aluminum metal matrix composite􀔡, In: ICEE 17 Hawaii USA: 26 – 31, 2009.

  • Adrian Iosub, Gheorghe Nagit and Florin Negoescu, ―Tool wear investigation in electric discharge machining of aluminum matrix composite materials􀔡, 2009.

  • K. M. Patel, Pulak M. Pandey, P. Venkateswara Rao, ―Surface integrity and material removal mechanisms associated with the EDM of Al2O3 ceramic composite||, International Journal of Refractory metals and Hard materials Vol. 27,pp. 892-899, 2009.

  • M. Karthikeyan and T. Sornakumar, ―EDM studies on aluminum alloy-silicon carbide composites developed by vortex technique and pressure die casting―, Journal of minerals and material characterization & Engineering, Vol 9, p.77-88, 2010.

  • Adrian Iosub, Eugen Axinte, Florin Negoescu, ―A study about micro-drilling by electrical discharge method of an Al/SiC hybrid composite||, International journal of academic research. 2 (3): 6-12, 2010.

  • Velusamy Senthilkumar, Bidwai Uday Omprakash, ―Effect of Titanium Carbide particle addition in the aluminum composite on EDM process parameters|| Journal of Manufacturing Processes. 13: 60–66, 2011.

  • Nanimina, A. Mouangue, Abdul-Rani, A. M., Ahmad, F., Zainuddin, A., Jason, Lo SH., ―Effects of Electrodischarge Machining on Aluminum Metal Matrix Composite||, Journal of Applied Sciences. 11: 1668-1672, 2011.

  • S. Singh, ―Optimization of machining characteristics in Electrical discharge machining of Al2O3 p/ 6061 Al cast metal matrix composites||, International Journal of Advanced Manufacturing Technology, 2012.

  • M. Prabu, G. Ramadoss, P. Narendersingh, T.V. Christy and V. Vedhagiri Eswaran, ―Electrical discharge machining of Al-TiB2 with low-frequency vibrating tool―, Science and Engineering of Composite Materials, Vol 0, p.1–8, DOI: 10.1515/secm-2013-0023, 2013.

  • P. Senthil, Vinodh Sekar and Adarsh Kumar Singh, ―Parametric optimization of EDM on Al- Cu/TiB2 in-situ Metal Matrix Composites using TOPSIS method||, International Journal of Machining and Machinability of Materials, 2014.

  • N. Radhika, G. Kishore Chandran, P. Shivaram, K. T. Vijay Kumar, ―Multi-Objective Optimization of EDM Parameters Using Grey Relational Analysis||, Journal of Engineering Science and Technology Vol.10 No.1 1-11, 2015.

  • Gatto, Iuliano, L., ―Cutting mechanisms and surface features of WED machined metal matrix composites||, Journal of Materials Processing Technology. 65: 209-214, 1997.

  • Rozenek, M. Kozak J. Daibrowski L. Ebkowski K, ―Electrical discharge machining characteristics of metal matrix composites||, Journal of Materials Processing Technology. 109: 367-370, 2001.

  • Samy Ebeid, Raouf Fahmy and Sameh Habib, ―Mathematical Modelling for Wire Electrical Discharge Machining of Aluminum-Silicon Carbide Composites||, Proceedings of the 34th International MATADOR Conference, pp 147-152, 2004.

  • Yan, B. H., Hsien Chung Tsai, Fuang Yuan Huang, Long Chorng Lee, ―Examination of wire electrical discharge machining of Al2O3p/6061Al composites||, International Journal of Machine Tools & Manufacture. 45: 251–259, 2005.

  • Manna, A., Bhattacharyya, B., ―Taguchi and Gauss elimination method: A dual response approach for parametric optimization of CNC wire cut EDM of PRAlSiC-MMC||, Int J Adv Manuf Technol. 28: 67–75, 2006.

  • Patil, N. G., Brahmankar P. K., ―Some investigations into wire electro-discharge machining performance of Al/SiCp composites||, International Journal of Machining and Machinability of Materials. 1(4):412–431, 2006.

  • Nilesh Ganpatrao Patil and P. K. Brahmankar, ―Determination of material removal rate in wire electro-discharge machining of metal matrix composites using dimensional analysis||, International Journal of Advanced Manufacturing Technology. Vol. 48, pp 537-555, 2010.

  • Satishkumar, D., Kanthababu, M., Vajjiravelu, V., Anburaj, R., Thirumalai Sundarrajan, Arul, H., ―Investigation of wire electrical discharge machining characteristics of Al6063/SiCp composites||, Int J Adv Manuf Technol. 56:975–986, 2011.

  • Pragya Shandilya, P. K. Jain, N. K. Jain, ―RSM and ANN Modeling Approaches For Predicting Average Cutting Speed During WEDM of SiCp/6061 Al MMC||, Procedia Engineering 64 767 – 774, 2013.

  • Rajaneesh N. Marigoudar and Kanakuppi Sadashivappa, ―Effect of Machining Parameters on MRR and Surface Roughness in Machining of ZA43/ SiCp Composite by WEDM||, International Journal of Applied Science and Engineering, 11, 3: 317-330, 2013.

  • Sanjeev KR. Garg, Alakesh Manna, Ajai Jain, ―Multi-objective optimization of machining characteristics during wire electrical discharge machining of Al/ZrO2 particulate reinforced metal matrix composite||, Journal of Engineering Research Volume 1 –(3) 145-160, 2013.

  • Uday A. Dabade, ―Multi-objective Process Optimization to Improve Surface Integrity on Turned Surface of Al/SiCp Metal Matrix Composites Using Grey Relational Analysis||, Procedia CIRP 7 299 – 304, 2013.

  • Nilesh G. Patil and P. K. Brahmankar, ―Some studies into wire electro-discharge machining of alumina particulate-reinforced aluminum matrix composites||, Journal of the Brazilian Society of Mechanical Sciences and Engineering. Vol 36, pp 335-346, 2014.

  • Shyam Lal, Sudhir Kumar, Z. A. Khan, and A. N. Siddiquee, ―Wire electrical discharge machining of Al7075/SiC/Al2O3 hybrid composite fabricated by inert gas-assisted electromagnetic stir-casting process􀔡, Journal of the Brazilian Society of Mechanical Sciences and Engineering. Vol 36, pp 335-346, 2014.

  • Ashish Srivastava, Amit Rai Dixit, Sandeep Tiwari, ―Experimental Investigation of Wire EDM Process Parameters on Aluminum Metal Matrix Composite Al2024/SiC􀔡, International Journal of Advance Research and Innovation, Volume 2 pg.511-515, 2014.

  • Anand Sharma, Mohinder Pal Garg, Kapil Kumar Goyal, ―Prediction of optimal conditions for WEDM of Al 6063/ ZrSiO4 (p) MMC􀔡, Procedia Materials Science, 1024 – 1033, 2014.

  • Kansal, H. K., Singh, S., Kumar, P., ―An experimental study of the machining parameters in powder mixed electric discharge machining of Al–10%SiCp metal matrix􀔡, International Journal of Machining and Machinability of Materials. 1 (4): 396–411, 2006.

  • Shankar Singh, Sachin Maheshwari, Aloke Dey, Pandey, P.C., ―Experimental results and analysis for Electrical Discharge Machining of aluminum metal matrix composites with powder-mixed dielectric: Length‘s method􀔡, International Journal of Manufacturing Technology and Management. 21 (1/2): 67 – 82, 2010.

  • Gangadharudu Talla, Deepak Kumar Sahoo, S.Gangopadhyay, C.K.Biswas., ―Modeling and Multi-Objective Optimization of Powder Mixed Electric Discharge Machining Process of Aluminium/Alumina Metal Matrix Composite􀔡, Engineering Science and Technology, an International Journal 1-5, 2015.

  • Mwangi J. W, Ikua B. W, Nyakoe.G. N, Zeidler H and Kabini S. K., ―Effect of Dieletric Fluid and Vibration on Performance in Electrical Discharge Machining of AlSiC Metal Matrix Composites􀔡, International Conference on Sustainable Research and Innovation, Vol-5, 2014.

  • Jonahing Zhao, Masanori Kunieda, Guilin Yang, Xue-Ming Yuan, ―Micro-EDM for an Aluminum Matrix Composite􀔡, Key Engineering Materials. 447-448, 2010.

  • R. K. Garg, K. K. Singh, Anish Sachdeva,Vishal S. Sharma, Kuldeep Ojha, and Sharanjit Singh., ―Review of research work in sinking EDM and WEDM on metal matrix composite materials􀔡, The International Journal of Advanced Manufacturing Technology, Vol 50, pp 611-624, 2010.

  • Muller, F., Monaghan, J., ―Non-conventional machining of particle reinforced metal matrix composites􀔡, Journal of Materials Processing Technology. 118: 278-285, 2001.


Abstract Views: 798

PDF Views: 2




  • A Review Study on Electro Discharge Machining on Al-SiC Composites

Abstract Views: 798  |  PDF Views: 2

Authors

Sambeet Kumar Sahu
Department of Mechanical Engineering, BEC, Bhubaneswar, India

Abstract


Manufacturing industries are facing difficulties from newly developed, advanced materials viz. composites, ceramics and super alloys, which fall under the category of difficult-to-machine materials. To overcome these challenges, non-conventional machining processes are being employed which give better material removal rate, accuracy and surface finish. Electrical Discharge Machining (EDM) is the process in which electrically conductive materials are machined irrespective of their hardness using controlled sparks in the presence of dielectric. Aluminium Metal Matrix Composites (AMMC's) are new generation engineering materials that possess superior physical and mechanical properties compared to non-reinforced alloys. This paper presents a review of research work done on Al-SiC metal matrix composite on EDM, Wire EDM, Powder Mixed EDM, EDM in Water, Micro EDM. The paper also discusses the future scope of work in the same area.

Keywords


Electrical Discharge Machining, Metal Matrix Composites, Metal Removal Rate, Tool Wear.

References