Open Access
Subscription Access
Structure Determination of Al2CuMg Precipitates in AlCu15Mg5 Alloys by High-Resolution Electron Microscopy
In this paper, the structure of the S - phase (Al2CuMg) precipitate in Al matrix in high-copper AlCu15Mg5 alloys has been determined by using a high-resolution electron microscopy. Al2CuMg precipitate improve the mechanical properties of the AlCu15Mg5 alloy because the precipitates act to impede dislocation motion through the material. The two alloys AlCu15Mg5, without of Ti and with 0.3%Ti, reveal a similar density of precipitate with a particle size ranging from 50nm up to 80nm in length. The precipitates have an irregular shape and precipitates in the [2 1 4] direction. The precipitates mainly composed of Al, Cu and Mg and homogeneously distributed throughout the matrix. Small-size particles and dislocations observed by TEM with EDS mapping showing the copper rich nature of particles. Al, Cu, Mg were detected by EDS, and EDS maps suggests that they correspond to Al2CuMg.
Keywords
Al Alloys, Al2CuMg precipitate, Hardness, High-Resolution Electron Microscopy, Precipitation Sequence.
User
Font Size
Information
- Zlaticanin B, Radonjic B, & Filipovic M, Mater Trans, 45 (2004) 440.
- Kilaas R, & Radmilovic V, Microscopy and Microanalysis, 6 (2020) 1030.
- Perlitz H, & Westgren A, Ark. Kemi Mineral Geol, 16B (1943) 1.
- Laves F, & Witte H, Metallwirtschaft, 15 (1936) 15.
- Nishimura H, Mem. Colloid Eng. Kyoto Imp. Univ, 10 (1937) 18.
- Mondolfo L F, Aluminium Alloys: Structure and Properties, (Butterworth - Heinemann, London), 1st Edition, eBook ISBN: 9781483144825, 1976, p. 497.
- Cuisiat F, Duval P, & Graf R, Scr Metall, 18 (1984) 1051.
- Yan J, Chunzhi L, & Minggao Y, J Mater Sci Lett, 9 (1990) 421.
- Perez-Landazabal J I, Madariaga G, & Juan J S, J Mater Res, 12 (1997) 577.
- Cheng S, Zhao Y H, Zhu Y T, & Ma E, Acta Mater, 55 (2007) 5822.
- Liu Z R, Chen J H, Wang S B, Yuan D W, Yin M J, & Wu C L, Acta Materialia, 59 (2011) 7396.
- DeRose J A, Bałkowiec A, Michalski J, Suter T, Kurzydlowski K J,& Schmutz P, Transactions on State of the Art in Science and Engineering, 61 (2012) 23.
- Tafti M F, Sedighi M, & Hashemi R, Iranian Journal of Materials Science & Engineering, 15 (2018) 1.
- Wolverton C, Acta mater, 49 (2001) 3129.
- Cochard A, Zhu K, Joulié S, Douin J, & Huez J, Materials Science and Engineering: A, 690 (2017) 259.
- García-Hernández J L, Garay-Reyes C G, Gómez-Barraza I K, Ruiz-Esparza-Rodríguez M A, Gutiérrez-Castañeda E J, Estrada-Guel I, Maldonado-Orozco M C,& Martínez-Sánchez R, J Mater Res Technol, 8 (2019) 5471.
- Wang S C, & Starink M J, Int Mater Rev, 50 (2005) 193.
- Tolley A, Ferragut R, & Somoza A, Philosophical magazine, 89 (2009) 1095.
- Moy C K S, Weiss M, Xia J, Sha G, Ringer S P,& Ranzi G, Materials Science and Engineering: A, 552 (2012) 48.
- Wang S C, & Starink M J, Acta Materialia, 55 (2007) 933.
- Styles M J, Hutchinson C R, Chen Y, Deschamps A, & Bastow T J, Acta Materialia, 60 (2012) 6940.
- Sha G, Marceau R K W, Gao X, Muddle B C,& Ringer S P, Acta Materialia, 59 (2011) 1659.
- Gurugubelli S N, World Acad Sci Eng Technol, 62(2012) 648.
- Afzal N, Shah T, & Ahmad R, Problemi Procnosti, 6 (2013) 69.
- Notin M, Dirand M, Bouaziz D, & Hertz J, CR Acad Sci Paris, 302 (1986) 63.
Abstract Views: 158
PDF Views: 77