Indian Journal of Engineering & Materials Sciences

Open Access Open Access  Restricted Access Subscription Access

Production of Bamboo Fibre Reinforced Epoxy Hybrid Composite with Nano SiO2 Particles


Affiliations
1 Department of Mechanical Engineering, CSIT Durg C.G. 491 001, India
2 Department of Mechanical Engineering, MANIT Bhopal, 462 003, India
 

This paper focus on the process of fiber reinforced composites a significant portion of the paper emphasis the use of different machine, basic concept introduced in this paper of molding method and pouring of epoxy, hardener and nano silica mixture with hand lay-up technique. This study aims to develop fibre-reinforced epoxy hybrid composites by using hand lay-up method. In this work different material used are Epoxy LY556, Hardner HY951, SiO<sub>2</sub> nano particle (Particle size 60-70 nm) and 90 degree bidirectionl wooven bamboo fibre. Sample designated are as A10 ( One layer Babboo fibre, 0% SiO<sub>2</sub>) , A12 (2%SiO<sub>2</sub>), A14 (4%SiO<sub>2</sub>), B20 (Two-layer bamboo fibre,0% SiO<sub>2</sub>), B22(2%SiO<sub>2</sub>), B24(4%SiO<sub>2</sub>), C30 (three layer bamboo fibre, 0% SiO<sub>2</sub>), C32(2%SiO<sub>2</sub>) and C34(4%SiO<sub>2</sub>). Samples were prepared by hand lay-up method. The effect of various weight percent of SiO2on mechanical property were investigated. The maximum value of tensile strength was found for sample C32, higher value of flexural strength was found for sample C32, higher value of izod impact test was for sample C32 and maximum value of barcol hardness was for sample B22.

Keywords

Natural Fibres, Bamboo Fibre Reinforced Nano Composites, Hand Lay-Up Technique, Epoxy Matrix, Hardener.
User
Notifications
Font Size

  • Jindal U C, J compos mater, 20 (1986) 19.

  • Gunasekaran G, Periyasamy S, & Prakash C, J Text Inst, 111 (2020) 318.

  • Kim Y, Eum H, Choi B K, & Dutta P K, Key Eng Mater, 261 (2004) 1493.

  • Sharma S S, & Wetzel K, J compos mater, 44 (2010) 437.

  • Dheeraj K, Int J Mech Eng Technol, 5 (2014) 110.

  • Saxena M, & Sorna V G, Polym compos, 4 (2003) 428.

  • Sain M, Imbert C, & Kokta B, Die Angew, Macromol Chem, 210 (1993) 33.

  • Vikram M, Yendhe S, & Niles M, Int J Res Appl Sci Eng Technol, 3 (2015) 6.

  • Rao V K, Venkatesha N G, Sanjeeva M, J Eng Appl Sci, 11 (2016) 1.

  • Prabhu R, Frazer S, Akshay D, & Ovin T B, Am J Mater Sci, 7 (2017) 130

  • Ramesh M, & Reddy K H, Renew Sust Energ Rev, 79 (2017) 558.

  • Vidyashri V, Mahesha G T, & Lewis H, Cogent Eng, 6 (2019) 1.

  • Asrofi M, Sapuan S M, Ilaysand R A, & Ramesh M, Mater Today Proc, 46 (2021) 1626.

  • Abedom F, Sakthivel S, Daniel A, Bahiru M, Eshetu S, & Senthil S K, Adv Mater Sci Eng, 5 (2021) 22.

  • Vandam J E, Elbersen H W, & Daza C M, Elsevier Amsterdam Netherlands, 11 (2018) 175.

  • Kilic U E, Sherif M M, & Ozbulut O E, Polym Test, 76 (2019) 181.

  • Jojibab P, Zhang X, & Prustee G, Int J Adhes Adhes, 10 (2020) 134.

  • Hufen B, Thieme W, Winkle M, & Schade M, Mater Destructive, 32 (2011) 1468.

  • Erartsın O, Van D, & Govaert M, J Compos Mater, 55 (2020) 1947.

  • Ramakrishna S, Mayer J, Wintermantel E, & Leong K W, Compos Sci Technol, 61 (2001) 1189.

  • Kolli B S, & Lakshman A K, J Chem Pharm Sci, 9 (2016) 4.

  • Yongli M, Chen X, & Qipeng G, J Appl polym Sci, 64 (1997) 1267.

  • Singh A, Singhand S, & Aditya K, Int J Mater Sci Appl, 2 (2013) 157.

  • Arpitha G R, Sanjay M R, Naik L L, & Yogesha B, Int J Eng Res Gen Sci, 2 (2014) 398.

  • Sudheer M, Prabhu R, Raju K, & Thirumaleshwara B, Adv Mater Sci Eng, 6 (2014) 11.

  • Mostafa N H, Ismarrubie Z N, Sapuan S M, & Sultan M T, J Compos Mater, 51 (2017) 39.

  • Trochoutsou N, Benedetti D, & Pilakoutas M, Constr Build Mater, 6 (2021) 271.

  • Singh L, Singh B & Saxena K K, Adv in Mat and Proc Technol, 6 (2020) 441.

  • Gupta N, Gupta A, Saxena K K, Shukla A & Goyal S K, Mat Today: Proc, 44 (2021) 12.

  • Dhawan A, Gupta N, Goyal R & Saxena K K, Mat Today: Proc, 44 (2021) 17.

  • Awasthi A, Saxena K K & Dwivedi R K, Mat Today: Proc, 44 (2021) 2061.

  • Khan A, Saxena K K, Mat Today: Proc, 56 (2022) 2316.


Abstract Views: 137

PDF Views: 72




  • Production of Bamboo Fibre Reinforced Epoxy Hybrid Composite with Nano SiO2 Particles

Abstract Views: 137  |  PDF Views: 72

Authors

Roopesh Kumar
Department of Mechanical Engineering, CSIT Durg C.G. 491 001, India
Abhijeet Ganguly
Department of Mechanical Engineering, CSIT Durg C.G. 491 001, India
Rajesh Purohit
Department of Mechanical Engineering, MANIT Bhopal, 462 003, India

Abstract


This paper focus on the process of fiber reinforced composites a significant portion of the paper emphasis the use of different machine, basic concept introduced in this paper of molding method and pouring of epoxy, hardener and nano silica mixture with hand lay-up technique. This study aims to develop fibre-reinforced epoxy hybrid composites by using hand lay-up method. In this work different material used are Epoxy LY556, Hardner HY951, SiO<sub>2</sub> nano particle (Particle size 60-70 nm) and 90 degree bidirectionl wooven bamboo fibre. Sample designated are as A10 ( One layer Babboo fibre, 0% SiO<sub>2</sub>) , A12 (2%SiO<sub>2</sub>), A14 (4%SiO<sub>2</sub>), B20 (Two-layer bamboo fibre,0% SiO<sub>2</sub>), B22(2%SiO<sub>2</sub>), B24(4%SiO<sub>2</sub>), C30 (three layer bamboo fibre, 0% SiO<sub>2</sub>), C32(2%SiO<sub>2</sub>) and C34(4%SiO<sub>2</sub>). Samples were prepared by hand lay-up method. The effect of various weight percent of SiO2on mechanical property were investigated. The maximum value of tensile strength was found for sample C32, higher value of flexural strength was found for sample C32, higher value of izod impact test was for sample C32 and maximum value of barcol hardness was for sample B22.

Keywords


Natural Fibres, Bamboo Fibre Reinforced Nano Composites, Hand Lay-Up Technique, Epoxy Matrix, Hardener.

References