Indian Journal of Engineering & Materials Sciences

Open Access Open Access  Restricted Access Subscription Access

Experimental Investigation on Dimensional Characteristics and Surface Morphology of Microchannels Fabricated on Smart Ceramic by DPSS Nd:YAG Laser


Affiliations
1 Department of Production Engineering, Veer Surendra Sai University of Technology, Burla 768 018, India
2 Department of Mechanical Engineering, National Institute of Technology, Rourkela 769 008, India
 

Smart ceramic material like barium titanate (BaTiO<sub>3</sub>) is in high demand in today's highly competitive precision industries; as it has numerous applications in electronic, biomedical, and aerospace engineering. In this endeavor, laser micro-milling approach (LMMA) has been attempted with a suitable experimental design plan; to scrutinize the laser influencing variables against the LMMA outcomes during the processing of BaTiO3 throughout the fabrication of micro-channels. This article presents an investigational act on the fabricated micro-channels to discern the impacts of LMMA parameters (gas pressure, scan strategy, current and scanning speed) against the dimensional (like deviations in channel upper and lower width) and surface characteristics of the surface feature. The surface morphology study has been accomplished with the support of energy dispersive spectroscopy (EDS) in conjunction with scanning electron microscope (SEM) to scrutinize the elemental alterations and surface characteristics at the zone of laser ablation. A statistical multi-objective optimization (MOO) technique known as grey relational analysis (GRA) has been used later in this paper to predict an optimal parametric setting. The MOO results’ efficacy has been validated further in the corroboration assessments, the predicted optimal solutions have been obtained with an error of 4.57 %, 3.89 % and 4.88 % for W-RCL, LWD and UWD respectively.

Keywords

Laser Micro-Milling Approach (LMMA), Microchannels, BaTiO3, Smart-Ceramic, Multi-Objective Optimization (MOO).
User
Notifications
Font Size

  • Staehle RW, Mater Sci Eng A 198 (1995) 245.

  • Pradhan S, Das RS, Jena PC & Dhupal D, Adv Mater Process Technol 83 (2021) 1714.

  • Panigrahi D, Rout S, Patel KS & Dhupal D, Int J Adv Manuf Technol, 112 (2021) 133.

  • Farooq UM, Ali MS, He Y, Khan AM, Pruncu CL, Kashif M, Ahemad N & Asif N, J Mater Res Technol, 9 (2021) 16186.

  • Rout S, Panigrahi D, Patel KS & DhupalD, Opt Lasers Eng, 144 (2021) 106654.

  • Pradhan S, Tripathy SS & Dhupal D, Adv Mater Process Technol 82 (2021) 596.

  • Mems T, Eom C, & Trolier-mckinstry S, Thin-film piezoelectric MEMS, (2021) 1007.

  • Raj D, Reddy RVB, Maity RS & Pandey MK, Mater Today Proc, 18 (2019) 98.

  • Meijer J, J Mater Proc Tech 149 (2004) 2.

  • Jadhav A & Kumar S, Adv Mater Process Technol 5 (2019) 429.

  • Wang L, Zhao W, Mei X, Yang Z, Shen X & Liu H, Ceram Int 46 (2020) 24018.

  • S, Dhupal D & Kumar B, Mater Today Proc 5 (2018) 24133.

  • Zhang Z, Wang W, Jiang R, Zhang X, Xiong Y, & Mao Z, Opt Laser Technol, 121 (2020)105834.

  • Shrivastava PK, Singh B, Shrivastava Y, Pandey AK & Nandan D, Proc Inst Mech Eng Part C, J Mech Eng Sci (2019) 1.

  • Khoshaim AB, Elsheikh AH, Moustafa EB, Basha M, & Showaib EA, J Mater Res Technol (2021) 235.

  • Pradhan S, Dash PB, & Kumari K, Adv Mater Process Technol, (2021) 1.

  • Allahyari E, Nivas JJJ, Valadan M, & Granata V, Opt Laser Technol 126 (2020) 106073.

  • Jain A, Singh B, & Shrivastava Y, Inst Mech Eng Part C J Mech Eng Sci (2019) 1.

  • Muthuramalingam T, Moiduddin K, Akash R, Krishnan S, Mian SH, Ameen W, & Alkalefah H, Opt Laser Technol 132 (2020) 106494.

  • Saini KS & Dubey KA, J Manuf Process, 44 (2019) 349.

  • Ranjan S, Sudhansu D, Das R & Dhupal D, J Ind Eng Int, 15 (2019) 333.

  • Dixit SR, Panigrahi D, Rout S, Panda S,& Dhupal D,Lasers Eng, 49 (2021) 319.

  • Panigrahi D, Rout S, Sanket S, Patel SK & Dhupal D, Mater Today Proc 44 (2021) 1916.

  • Abdo BMA, Anwar S, El-tamimi AM, Alahmari AM, & Nasr EA, Precis Eng 53 (2018) 179.

  • Abdo BMA, El-tamimi AM, Anwar S, Umer U, Alahmari AM, & Ghaleb MA, Int J Adv Manuf 98 (2018) 2213.

  • Khan M, Umer U, & Al-ahmari A, J Manuf Process 41 (2019) 148.

  • Abdo AMB, Ahmed N, El-tamimi MA, Anwar S, Alkhalefah H, & Nasr AE, 33 (2019) 1.

  • Zhu H, Zhang Z, Xu J, Xu K & Ren Y, Precis Eng 54 (2018) 154.

  • Liu Y, Liu L, Deng J, Meng R, Zou X, & Wu F, Ceram Int 8 (2017) 6519.

  • Feng S, Zhang R, Huang C, Wang J, Jia Z & Wang J, Mater Sci Semicond Process 105 (2020) 104701.

  • Wang XY, Ng GKL, Liu Z, Li L, & Bradley L, Thin Solid Films 454 (2004) 84.

  • Li Z, Zhang F, Luo X, Chang W, Cai Y & Zhong W, J Eur Ceram Soc 39(2019) 705.

  • Girish BM, Siddesh HS, & Satish BM, SN Appl Sci 1 (2019) 937.

  • Song H, Dan J, Li J, Du J, Xiao J & Xu J, J Manuf Process 38 (2019) 9.

  • Pu Y, Zhao Y, Meng J, Zhao G. & Liu Q, Materials14 (2021) 529.

  • Kumar S, Mitra B & Kumar N, Grey Sys Theo App 9 (2019) 449.

  • Sylajakumari P A, Ramakrishnasamy R & Palaniappan G, Materials 11 (2018) 1743.


Abstract Views: 136

PDF Views: 90




  • Experimental Investigation on Dimensional Characteristics and Surface Morphology of Microchannels Fabricated on Smart Ceramic by DPSS Nd:YAG Laser

Abstract Views: 136  |  PDF Views: 90

Authors

Samir Kumar Panda
Department of Production Engineering, Veer Surendra Sai University of Technology, Burla 768 018, India
Sweta Rout
Department of Mechanical Engineering, National Institute of Technology, Rourkela 769 008, India
Debasish Panigrahi
Department of Mechanical Engineering, National Institute of Technology, Rourkela 769 008, India
Debabrata Dhupal
Department of Production Engineering, Veer Surendra Sai University of Technology, Burla 768 018, India

Abstract


Smart ceramic material like barium titanate (BaTiO<sub>3</sub>) is in high demand in today's highly competitive precision industries; as it has numerous applications in electronic, biomedical, and aerospace engineering. In this endeavor, laser micro-milling approach (LMMA) has been attempted with a suitable experimental design plan; to scrutinize the laser influencing variables against the LMMA outcomes during the processing of BaTiO3 throughout the fabrication of micro-channels. This article presents an investigational act on the fabricated micro-channels to discern the impacts of LMMA parameters (gas pressure, scan strategy, current and scanning speed) against the dimensional (like deviations in channel upper and lower width) and surface characteristics of the surface feature. The surface morphology study has been accomplished with the support of energy dispersive spectroscopy (EDS) in conjunction with scanning electron microscope (SEM) to scrutinize the elemental alterations and surface characteristics at the zone of laser ablation. A statistical multi-objective optimization (MOO) technique known as grey relational analysis (GRA) has been used later in this paper to predict an optimal parametric setting. The MOO results’ efficacy has been validated further in the corroboration assessments, the predicted optimal solutions have been obtained with an error of 4.57 %, 3.89 % and 4.88 % for W-RCL, LWD and UWD respectively.

Keywords


Laser Micro-Milling Approach (LMMA), Microchannels, BaTiO3, Smart-Ceramic, Multi-Objective Optimization (MOO).

References