Indian Journal of Engineering & Materials Sciences

Open Access Open Access  Restricted Access Subscription Access

Influence of Parameters on Mechanical and Micro-Structural Properties of Tungsten Inert Gas (TIG) Welded Joint of 1 mm Thin Inconel 625 Plates


Affiliations
1 Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, West Bengal 721302, India
2 Production and Industrial Engineering Department, National Institute of Technology Jamshedpur, Jharkhand 831014, India
 

Inconel 625 (IN625), since its invention, has been a material of choice for industries where components in service conditions are exposed to extremely high temperatures, corrosion, and oxidation environments. As per the American welding society for butt-joining such alloys in sheets, non-traditional techniques are the best means for producing permanent joints. These techniques require high-cost setup and high maintenance costs which are only economical for high-volume assembly line fabrication in mass-production facilities. Therefore, Tungsten Inert Gas (TIG) welding is highly suitable for producing defect-free autogenous weldments in high-strength alloy sheets with a thickness below 3mm. The current work focuses on the experimental investigation of the TIG welding of Inconel 1mm sheets. In this work, mechanical properties and microstructure are studied for controlled heat input of TIG welding. Current is varied from 40A to 65A and voltage from 10V to 12V. Only three combinations of parameters show sound weld visually and are analyzed by performing various testing. The main objective of the study is to find the feasible process parameters for the micro joining of IN625 sheets. From this discussion, it appears that arc energy, welding current, and voltage significantly affect the quality of the weld.

Keywords

Tungsten Inert Gas (TIG) Welding, Inconel 625 (IN625), Arc Energy, Welding Current, Voltage.
User
Notifications
Font Size

  • Oliveira M de, Couto A, Almeida G, Reis D, Lima N de & Baldan R, Metals (Basel), 9 (2019) 301; doi: 10.3390/met9030301.

  • Tudu N, Baruah M, Prasad S B & Paul C P, in Next Generation Materials and Processing Technologies: Select Proceedings of RDMPMC 2020, edited by Bag S, Paul C P & Baruah M(Springer Nature, Singapore), 2021, 185; doi: 10.1007/978-981-16-0182-8_15.

  • Ruiz-Vela J I, Montes-Rodríguez J J, Rodríguez-Morales E & Toscano-Giles J A,Weld World, 63 (2019)459; doi: 10.1007/s40194-018-0661-z.

  • Tudu N, Baruah M & Prasad S B, Sci Technol Weld Join,(in press); doi: 10.1080/13621718.2022.2156715.

  • Tudu N, Baruah M & Prasad S B, Rapid Prototyp J,(in press); doi: 10.1108/RPJ-08-2021-0219.

  • Volpato G M, TetzlaffU & Fredel M C Addit Manuf, 55 (2022) 102871; doi: 10.1016/j.addma.2022.102871.

  • Prasad K S, Chalamalasetti S R & Damera N R, Int J Adv Manuf Technol, 78 (2015) 625; doi: 10.1007/s00170-014-6665-y.

  • Baruah M, Prasad S B, Tudu N, Murmu B K & Singh S, Mater Today Proc, 33 (2020) 5751 doi: 10.1016/j.matpr.2020.06.604.

  • Nagaraju U, Gowd G H & Vardan T V, Mater Today Proc, 5 (2018) 7991; doi: 10.1016/j.matpr.2017.11.483.

  • Ashtiani H R R & Zarandooz R, Metall Mater Trans A Phys Metall Mater Sci, 46 (2015) 4095; doi: 10.1007/s11661-015-3030-1.

  • Chen J, Demers V, Turner D P & Bocher P Metall Mater Trans A Phys Metall Mater Sci, 49 (2018) 1244; doi: 10.1007/s11661-018-4474-x.

  • Stewart M. Fabrication, Welding, and in-Shop Inspection. In: Surface Production Operations Elsevier; 2021; p. 197; doi: 10.1016/B978-0-12-803722-5.00006-9.

  • Choudhury B, Chandrasekaran M, Tamang S & Teyi N Optimization Study on GTAW of Inconel 825 Using Desirability Function Analysis ( DFA ), paper presented at 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016) 2016.

  • Kanemaru S, Sasaki T, Sato T, Mishima H, Tashiro S & Tanak M, Weld World 58 (2014) 11; doi: 10.1007/s40194-013-0090-y.

  • Cortés R, Barragán E R, López VH, Ambiz R R & Jaramillo D, Int J Adv Manuf Technol, 94 (2018) 3949–3961; doi: 10.1007/s00170-017-1128-x.

  • Rodríguez NK, Barragán ER, Lijanova I V., Ambriz R R & Jaramilo D, inProceedings of the 17th International Conference on New Trends in Fatigue and Fracture,edited byedited by Ambriz R, Jaramillo D, Plascencia G & Abdelaziz M N (Springer International Publishing: Cham, Switzerland), 2018, 255; doi: 10.1007/978-3-319-70365-7_29.

  • Lader S K, Baruah M and Ballav R, J Manuf Process, 85 (2023) 1154; doi: 10.1016/j.jmapro.2022.12.033.


Abstract Views: 134

PDF Views: 92




  • Influence of Parameters on Mechanical and Micro-Structural Properties of Tungsten Inert Gas (TIG) Welded Joint of 1 mm Thin Inconel 625 Plates

Abstract Views: 134  |  PDF Views: 92

Authors

Saurabh Tripathi
Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, West Bengal 721302, India
Nehem Tudu
Production and Industrial Engineering Department, National Institute of Technology Jamshedpur, Jharkhand 831014, India
Mayuri Baruah
Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, West Bengal 721302, India
Raj Ballav
Production and Industrial Engineering Department, National Institute of Technology Jamshedpur, Jharkhand 831014, India
Shashi Bhushan Prasad
Production and Industrial Engineering Department, National Institute of Technology Jamshedpur, Jharkhand 831014, India

Abstract


Inconel 625 (IN625), since its invention, has been a material of choice for industries where components in service conditions are exposed to extremely high temperatures, corrosion, and oxidation environments. As per the American welding society for butt-joining such alloys in sheets, non-traditional techniques are the best means for producing permanent joints. These techniques require high-cost setup and high maintenance costs which are only economical for high-volume assembly line fabrication in mass-production facilities. Therefore, Tungsten Inert Gas (TIG) welding is highly suitable for producing defect-free autogenous weldments in high-strength alloy sheets with a thickness below 3mm. The current work focuses on the experimental investigation of the TIG welding of Inconel 1mm sheets. In this work, mechanical properties and microstructure are studied for controlled heat input of TIG welding. Current is varied from 40A to 65A and voltage from 10V to 12V. Only three combinations of parameters show sound weld visually and are analyzed by performing various testing. The main objective of the study is to find the feasible process parameters for the micro joining of IN625 sheets. From this discussion, it appears that arc energy, welding current, and voltage significantly affect the quality of the weld.

Keywords


Tungsten Inert Gas (TIG) Welding, Inconel 625 (IN625), Arc Energy, Welding Current, Voltage.

References