Indian Journal of Engineering & Materials Sciences

Open Access Open Access  Restricted Access Subscription Access

Development and Characterization of Pva Based Green Nanocomposite Membrane for next Generation Sustainable Food Packaging Applications".


Affiliations
1 Department of Mechanical Engineering, Shambhunath Institute of Engineering and Technology, Jhalwa 211 015, India
2 Department of Mechanical Engineering, Nirwan University, Jaipur 303 306, India
3 Department of Physics, Babasaheb Bhimrao Ambedkar University, Lucknow 226 025, India
 

A biodegradable and non-toxic water-soluble polymer is Polyvinyl Alcohol (PVA) is used in the present work. It is used in production industry applications because of its biocompatibility, low toxicity, and good adhesive properties. Biodegradable composite films are created in the current work using waste materials like wheat husk and coconut fibers. The alkali procedures are used to create the wheat husk (WH) powder. It is low cost and light-weight. Coconut fibers are eco-friendly and non-polluting too. Aloe-vera consists of properties such as adhesive properties, flexural strength, and good tensile strength. The solution-casting approach is used to create composite films with a polyvinyl alcohol basis. Films are given physical and mechanical descriptions. SEM (scanning electron microscopy), FTIR (Fourier Transform Infrared) spectroscopy, and DSC (differential scanning calorimeter) are used to study structural behaviours (DSC). Thermogravimetric analysis is used to evaluate the thermal stability of composite films (TGA). Mechanical properties such as tensile strength, % elongation, young modulus and surface properties have been evaluated. The non-destructive technique of X-Ray diffraction (XRD) is used to characterize crystalline materials. It provides detailed information about a material's crystallographic structure, chemical composition, & physical properties, including as structural parameters such as average grain size, crystallinity, strain, and crystal flaws, as well as crystal orientations (texture). Raman spectroscopy is a nondestructive chemical examination tool that can disclose a material's molecular interactions, chemical structure, phase, and polymorph. It is based on how light interacts with a substance's chemical connections.

Keywords

Polyvinyl Alcohol (PVA), Composites films, Tensile strength-RD, Fourier Transform Infrared (FTIR), Raman spectroscopy.
User
Notifications
Font Size

  • Young RJ, Lovell Boca Raton (FL)CRC Press; 3rd ed.p.(2011) 591.

  • Stevens ES. Princeton University Press (2002) 10.

  • Netravali AN, ChabbaS, Composites get greener Mater Today, 6(4) (2003)22.

  • Georgia Tech Research Institute. (2011).

  • Zimmerman, T Pohler, E Schwaller, P12, 1156(2005).

  • Oksmann, K, Sain, M, American Chemical Society, Washington, DC(2006). pp. 231

  • Ke, T Sun, X S J Polym EnvironJ polym environ (2003).

  • I. Siro and D Plackett Cellulose, vol 17, no 3(2010) 459.

  • S. J. Eichhorn, A. Dufresne, M. Aranguren et al Journal of Materials Science, vol. 45, no. 1.(2010) 1.

  • A. K. Bledzki, S. Reihmane, and J. Gassan. Journal of Applied Polymer Science, vol. 59, no. 8(1996)1329.

  • P. R. Hornsby, E. Hinrichsen, and K. Tarverdi. Journal of Materials Science, vol. 32, no. 4(1997)1009.

  • K. Oksman, L.Wallstrom, L. A. Berglund, and R. D. T. Filho Journal of Applied Polymer Science, vol. 84, no. 13, (2002), 2358.

  • D. N. Saheb and J. P. Jog. Advances in Polymer Technology, vol. 18(4)(1999)351,.

  • S. T. Georgopoulos, P. A. Tarantili, E. Avgerinos, A. G. Andreopoulos, and E. G. Koukio Polymer Degradationand Stability, 90 2(2005)303.

  • B. Lamy and C. Baley Journal of Materials Science Letters, vol. 19, no. 11(2000) 979.

  • Saxena S, Chemical and Technical Assessment (CTA). (2004) 611

  • Tsujiyama s, Nitta T, MaokaT.Bioeng.112(2011)58.

  • Sain MM, Kokta BV Polym Plast Technol Eng 89 (1994)33

  • Kotek, R polym, Rev48 (2008) 221.

  • Burger, c; Hsiao, B. S,;chu, B.Annu.Rev.Mater.Res.2006 (20) 333.

  • Zhuang.D.; Fu, j.; HuangY.; Ken. (2012). Rev.2016 (3) 1377

  • Alemdar A, Sain M. CA, November (2006)12.

  • M. A. Daniele, D. A. Boyd, A. A. Adams and F. S. Ligler. Adv. Healthcare Mater, 4(1)(2015) 11.

  • D. Lim, E. Lee, H. Kim, S. Park, S. Baek and J Yoon Soft Matter, (2015)1606.

  • Ng, T.S.; Ching, YC Awanis, N Ishenny, N. Rahman(2014- 2018) Mater Res Innov 400


Abstract Views: 100

PDF Views: 54




  • Development and Characterization of Pva Based Green Nanocomposite Membrane for next Generation Sustainable Food Packaging Applications".

Abstract Views: 100  |  PDF Views: 54

Authors

Abha
Department of Mechanical Engineering, Shambhunath Institute of Engineering and Technology, Jhalwa 211 015, India
Sushil Kumar Singh
Department of Mechanical Engineering, Nirwan University, Jaipur 303 306, India
Anshuman Srivastava
Department of Mechanical Engineering, Shambhunath Institute of Engineering and Technology, Jhalwa 211 015, India
Nidhi Asthana
Department of Physics, Babasaheb Bhimrao Ambedkar University, Lucknow 226 025, India

Abstract


A biodegradable and non-toxic water-soluble polymer is Polyvinyl Alcohol (PVA) is used in the present work. It is used in production industry applications because of its biocompatibility, low toxicity, and good adhesive properties. Biodegradable composite films are created in the current work using waste materials like wheat husk and coconut fibers. The alkali procedures are used to create the wheat husk (WH) powder. It is low cost and light-weight. Coconut fibers are eco-friendly and non-polluting too. Aloe-vera consists of properties such as adhesive properties, flexural strength, and good tensile strength. The solution-casting approach is used to create composite films with a polyvinyl alcohol basis. Films are given physical and mechanical descriptions. SEM (scanning electron microscopy), FTIR (Fourier Transform Infrared) spectroscopy, and DSC (differential scanning calorimeter) are used to study structural behaviours (DSC). Thermogravimetric analysis is used to evaluate the thermal stability of composite films (TGA). Mechanical properties such as tensile strength, % elongation, young modulus and surface properties have been evaluated. The non-destructive technique of X-Ray diffraction (XRD) is used to characterize crystalline materials. It provides detailed information about a material's crystallographic structure, chemical composition, & physical properties, including as structural parameters such as average grain size, crystallinity, strain, and crystal flaws, as well as crystal orientations (texture). Raman spectroscopy is a nondestructive chemical examination tool that can disclose a material's molecular interactions, chemical structure, phase, and polymorph. It is based on how light interacts with a substance's chemical connections.

Keywords


Polyvinyl Alcohol (PVA), Composites films, Tensile strength-RD, Fourier Transform Infrared (FTIR), Raman spectroscopy.

References