International Journal of Science, Engineering and Computer Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Effect of Oxygen Flow Rate on Structural and Optical Properties of Ta2O5 Thin Films Prepared by DC Sputtering Method


Affiliations
1 Department of Applied Sciences, DCRUST, Murthal, India
2 Sonepat, Electronic Science Department, Kurukshtera University, Kurukshtera, India
     

   Subscribe/Renew Journal


We have studied and characterized the process of deposition of tantalum oxide thin flim.For deposition of tantalum pentaoxide thin film we have used the DC magnetron sputtering technique. Oxygen flow rate has been varied to observe the effect on crystallinity ,deposition rate and refractive index of the deposited film. I-V characterstics have been reported using I-V set. The value of leakage current ranges from I =(0 to 2.33E-05 A) with crossponding values of electric field density E = (0 to 5 MV/Cm2). A wide energy band gap has been obtained (4.4eV ) using the transmittance of the deposited film.

Keywords

Oxygen Flow Rate, Ta2O5 Thin Films, DC Sputtering Method.
Subscription Login to verify subscription
User
Notifications
Font Size


Abstract Views: 292

PDF Views: 2




  • Effect of Oxygen Flow Rate on Structural and Optical Properties of Ta2O5 Thin Films Prepared by DC Sputtering Method

Abstract Views: 292  |  PDF Views: 2

Authors

Kanta Rathee
Department of Applied Sciences, DCRUST, Murthal, India
B. P. Malik
Department of Applied Sciences, DCRUST, Murthal, India
Mukesh Kumar
Sonepat, Electronic Science Department, Kurukshtera University, Kurukshtera, India

Abstract


We have studied and characterized the process of deposition of tantalum oxide thin flim.For deposition of tantalum pentaoxide thin film we have used the DC magnetron sputtering technique. Oxygen flow rate has been varied to observe the effect on crystallinity ,deposition rate and refractive index of the deposited film. I-V characterstics have been reported using I-V set. The value of leakage current ranges from I =(0 to 2.33E-05 A) with crossponding values of electric field density E = (0 to 5 MV/Cm2). A wide energy band gap has been obtained (4.4eV ) using the transmittance of the deposited film.

Keywords


Oxygen Flow Rate, Ta2O5 Thin Films, DC Sputtering Method.