International Journal of Technology

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Optimization of Milling Operation Parameter by Extended Taguchi Method


Affiliations
1 Department of Mechanical Engineering, Chouksey Engineering College, Bilaspur, India
2 Department of Mechanical Engineering, Lakhmi Chand Institute of Technology, Bilaspur, India
     

   Subscribe/Renew Journal


It has long been recognized that conditions during cutting, such as feed rate, cutting speed and depth of cut, should be selected to optimize the economics of machining operations as assessed by productivity, total manufacturing cost per component or some other suitable criterion. These quality features are highly correlated and are expected to be influenced directly or indirectly by the direct effect of process parameters or their interactive effects create multiobjective problems. To predict this problem we take the sixteen combinations of milling machining operation from DOE. In view of the fact, that traditional Taguchi method cannot solve a multi-objective optimization problem; to overcome this limitation grey relational theory has been coupled with Taguchi method. This problem can be solved by extended Taguchi’s method to convert multi objective problem into single objective problem. The developed models for different constraints have been used for the construction of an optimization programmed which can be used to obtain optimum cutting speeds, feed rates, axial depth of cut and radial depth of cut under different constraints.

Keywords

Milling, Quality, Surface Roughness, Material Removal Rate.
Subscription Login to verify subscription
User
Notifications
Font Size


  • U. Khandey, S. Datta, S. S. Mahapatra and A. Bandyopadhyay, “Taguchi Approach coupled with PCA and Utility Concept for Optimization of Correlated Multi-Quality Characteristics in Straight Turning of Mild Steel”, For International Journal of Machining and Machinability of Materials,, Inderscience Publications. (Under Review) (Manuscript ID: IJMTM8950)

  • Jaya Krishna, Kurnool (D. t),Vijaya Kumar Reddy, (2011), “Modeling of Machining Parameters in CNC End Milling Using Principal Component Analysis Based Neural Networks”. Innovative Systems Design and Engineering, Vol. 2 No. 3.

  • Sanjit Moshat, Saurav Datta, Asish Bandyopadhyay and Pradip Kumar Pal, (2010) Optimization of CNC end milling process parameters using PCA-based Taguchi method, International Journal of Engineering, Science and Technology Vol. 2, No. 1, pp. 92-102.

  • Wang M. Y. and Lan T. S., (2008), “Parametric Optimization on Multi-Objective Precision Turning Using Grey Relational Analysis”. Information Technology Journal, Volume 7, pp.1072- 1076.

  • Peace, G., S., (1993), “Taguchi Methods- A Hands-On Approach”, Addison- Wesley Publishing Company. Massachusetts.

  • Walia R. S., Shan H. S. and Kumar, P., (2006), “Multi-Response Optimization of CFAAFM Process Through Taguchi Method and Utility Concept”, Materials and Manufacturing Processes, Volume 21, pp. 907-914.

  • Sahoo P., Barman T. K. and Routara B. C., (2008), “Taguchi based practical dimension modeling and optimization in CNC turning”, Advance in Production Engineering and Management, Volume 3, Number 4, pp. 205-217.

  • Suresh P. V. S., Rao P. V. and Deshmukh S. G., (2002), “A genetic algorithmic approach for optimization of surface roughness prediction model”, International Journal of Machine Tools and Manufacture, Volume 42, pp. 675–680.


Abstract Views: 975

PDF Views: 0




  • Optimization of Milling Operation Parameter by Extended Taguchi Method

Abstract Views: 975  |  PDF Views: 0

Authors

Sharda Pratap Shrivas
Department of Mechanical Engineering, Chouksey Engineering College, Bilaspur, India
Kailash Kumar Kakkad
Department of Mechanical Engineering, Chouksey Engineering College, Bilaspur, India
Manoj Kumar Sahoo
Department of Mechanical Engineering, Lakhmi Chand Institute of Technology, Bilaspur, India

Abstract


It has long been recognized that conditions during cutting, such as feed rate, cutting speed and depth of cut, should be selected to optimize the economics of machining operations as assessed by productivity, total manufacturing cost per component or some other suitable criterion. These quality features are highly correlated and are expected to be influenced directly or indirectly by the direct effect of process parameters or their interactive effects create multiobjective problems. To predict this problem we take the sixteen combinations of milling machining operation from DOE. In view of the fact, that traditional Taguchi method cannot solve a multi-objective optimization problem; to overcome this limitation grey relational theory has been coupled with Taguchi method. This problem can be solved by extended Taguchi’s method to convert multi objective problem into single objective problem. The developed models for different constraints have been used for the construction of an optimization programmed which can be used to obtain optimum cutting speeds, feed rates, axial depth of cut and radial depth of cut under different constraints.

Keywords


Milling, Quality, Surface Roughness, Material Removal Rate.

References