Open Access Open Access  Restricted Access Subscription Access

Study of Slotted Array Waveguide with High Peak Gain Antenna for Data Communication


Affiliations
1 Department of Electronics and Communication Engineering, National Institute of Technology, Jamshedpur - 831014, Jharkhand, India
 

Objectives: This article manifests a study of high peak gain of a slotted array waveguide antenna. At first, two similar slot lengths 2-elements shunt slotted array antenna structures (i.e. Case-1) and two dissimilar slot lengths 2-elements shunt slotted array antenna structures (i.e. Case-2) are designed one by one. Methods/Statistical Analysis: The Multiple Cavity Modeling Technique (MCMT) has been applied in both cases of structural antennas. The scattering parameters (i.e. |S11| and |S21|) data have been computed for both cases of 2-element shunt slotted array antenna. The MCMT |S11| and |S21| data graphs have been compared with Ansoft High Frequency Structure Simulator (HFSS) simulated data graphs. Comparison results signify that a slight difference between computed and simulated data. Findings: Subsequently, the HFSS simulated gains total of the both cases of design structures antenna are obtained. The outcome found in 2-element shunt slotted array with similar slot length gains higher total rather than dissimilar slot length 2-element shunt slotted array antenna. In order to achieve further increases in gain a 2-elements lotted array antenna up to optimal point was extended up to seven slots. Analysis was done to compare the results with theoretical and simulated HFSS results. Application /Improvement: The antenna finds its application in high speed data communication system in the area of aircraft.

Keywords

Multiple Cavity Modeling Technique (MCMT), Peak Gain, Slot Array, Scattering Parameters, Waveguide
User

Abstract Views: 167

PDF Views: 0




  • Study of Slotted Array Waveguide with High Peak Gain Antenna for Data Communication

Abstract Views: 167  |  PDF Views: 0

Authors

Hare Ram Jha
Department of Electronics and Communication Engineering, National Institute of Technology, Jamshedpur - 831014, Jharkhand, India
Shiva Nand Singh
Department of Electronics and Communication Engineering, National Institute of Technology, Jamshedpur - 831014, Jharkhand, India

Abstract


Objectives: This article manifests a study of high peak gain of a slotted array waveguide antenna. At first, two similar slot lengths 2-elements shunt slotted array antenna structures (i.e. Case-1) and two dissimilar slot lengths 2-elements shunt slotted array antenna structures (i.e. Case-2) are designed one by one. Methods/Statistical Analysis: The Multiple Cavity Modeling Technique (MCMT) has been applied in both cases of structural antennas. The scattering parameters (i.e. |S11| and |S21|) data have been computed for both cases of 2-element shunt slotted array antenna. The MCMT |S11| and |S21| data graphs have been compared with Ansoft High Frequency Structure Simulator (HFSS) simulated data graphs. Comparison results signify that a slight difference between computed and simulated data. Findings: Subsequently, the HFSS simulated gains total of the both cases of design structures antenna are obtained. The outcome found in 2-element shunt slotted array with similar slot length gains higher total rather than dissimilar slot length 2-element shunt slotted array antenna. In order to achieve further increases in gain a 2-elements lotted array antenna up to optimal point was extended up to seven slots. Analysis was done to compare the results with theoretical and simulated HFSS results. Application /Improvement: The antenna finds its application in high speed data communication system in the area of aircraft.

Keywords


Multiple Cavity Modeling Technique (MCMT), Peak Gain, Slot Array, Scattering Parameters, Waveguide



DOI: https://doi.org/10.17485/ijst%2F2016%2Fv9i40%2F126514