Open Access Open Access  Restricted Access Subscription Access

Injection of Reactive Power for Optimization Power Loss and Voltage Deviation with a Proposed NSGA-II


Affiliations
1 Electrical and Biomedical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran, Islamic Republic of
2 Engineering Department, Science and Research, Alborz Branch, Islamic Azad University, Karaj, Iran, Islamic Republic of
3 Department of Electrical Engineering, Amirkabir University of Technology, Tehran, Iran, Islamic Republic of
 

The reactive power distribution affects the security and the economic performance of the power system chiefly. Although the reactive power generation is in does not cost anything in the operation phase, but it affects the whole cost by the system losses. The mentioned problem is a non-linear optimization topic with the combination of continuous and noncontinuous variables. This paper proposes a new innovative method to reach the increase in the power system deviation and transmission loss. In this study, it is tried to reach the most optimum multiple goals by based on multi objective Genetic Algorithm with Pareto optimal non-dominated solutions of OPF problem. In this study had employed the limit accept block until for put variable to the allowable limits. Simulation result shows the effect of proposes algorithm in reducing transmission loss and voltage deviation. A MNSGA-II is presented in this paper to solve the multi objective problems. The main goal is to determine the optimal combination of power outputs for all generating units that optimize the total power loss and voltage deviations while satisfying load demand (active and reactive) and operating constraints. According to results, the ability to jump out of the local optima enhanced and thus the high precision are achieved.

Keywords

NSGA-II, Optimization, Power Loss, Reactive Power, Voltage Deviation.
User

Abstract Views: 182

PDF Views: 0




  • Injection of Reactive Power for Optimization Power Loss and Voltage Deviation with a Proposed NSGA-II

Abstract Views: 182  |  PDF Views: 0

Authors

Hamed Aliyari
Electrical and Biomedical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran, Islamic Republic of
Reza Effatnejad
Engineering Department, Science and Research, Alborz Branch, Islamic Azad University, Karaj, Iran, Islamic Republic of
Mehdi Izadi
Electrical and Biomedical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran, Islamic Republic of
Seyed Hossein Hosseinian
Department of Electrical Engineering, Amirkabir University of Technology, Tehran, Iran, Islamic Republic of
Masoud Shirkhani
Electrical and Biomedical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran, Islamic Republic of

Abstract


The reactive power distribution affects the security and the economic performance of the power system chiefly. Although the reactive power generation is in does not cost anything in the operation phase, but it affects the whole cost by the system losses. The mentioned problem is a non-linear optimization topic with the combination of continuous and noncontinuous variables. This paper proposes a new innovative method to reach the increase in the power system deviation and transmission loss. In this study, it is tried to reach the most optimum multiple goals by based on multi objective Genetic Algorithm with Pareto optimal non-dominated solutions of OPF problem. In this study had employed the limit accept block until for put variable to the allowable limits. Simulation result shows the effect of proposes algorithm in reducing transmission loss and voltage deviation. A MNSGA-II is presented in this paper to solve the multi objective problems. The main goal is to determine the optimal combination of power outputs for all generating units that optimize the total power loss and voltage deviations while satisfying load demand (active and reactive) and operating constraints. According to results, the ability to jump out of the local optima enhanced and thus the high precision are achieved.

Keywords


NSGA-II, Optimization, Power Loss, Reactive Power, Voltage Deviation.



DOI: https://doi.org/10.17485/ijst%2F2016%2Fv9i36%2F128109