Indian Journal of Science and Technology

The PDF file you selected should load here if your Web browser has a PDF reader plug-in installed (for example, a recent version of Adobe Acrobat Reader).

If you would like more information about how to print, save, and work with PDFs, Highwire Press provides a helpful Frequently Asked Questions about PDFs.

Alternatively, you can download the PDF file directly to your computer, from where it can be opened using a PDF reader. To download the PDF, click the Download link above.

Fullscreen Fullscreen Off


Objective: Effect of machining parameter (Speed, Feed, Depth of cut) on output machine responses (Material Removal Rate (MRR), Machining time, Tool wear and Surface roughness) is studied using Taguchi method. Methods/Analysis: Experiment was conducted on work piece material namely EN8 Steel. For cutting speed, feed rate, Depth Of Cut (DOC). Orthogonal array L9 was created using MINITAB-16. For different combination, the respective surface roughness average was obtained using surface roughness tester and Taguchi analysis to understand the relation between the machining parameters and output responses. Findings: Feed rate is the important factor in obtaining the optimum surface finish of EN8 than other parameters during turning and also scarps can be reduced gradually. Novelty/Improvement: With the help of Taguchi method, Noise factor and control factor are identified which are highly useful in screening the critical parameters for optimum surface finish.

Keywords

Machining parameter, Optimisation, Surface Roughness, Taguchi Method, Turning.
User