Indian Journal of Science and Technology

Open Access Open Access  Restricted Access Subscription Access

Magnetic Resonance of Microstrip Line Loaded with Split Ring Resonator and Spiral Resonator


Affiliations
1 Department of ECE, Shaheed Bhagat Singh State Technical Campus, Ferozepur - 152004, Punjab, India
2 Departmentof ECE, Government Polytechnic College, Ferozepur - 152002, Punjab, India
3 Department of ECE, Sant Longowal Institute of Engineering and Technology, Longowal (Sangrur) - 148106, Punjab, India
 

Background/Objectives: In this paper, magnetic resonance of a microstrip line loaded with planar square split ring resonator (SRR) and spiral resonator (SR) structure, printed on Rogers RO3010 substrate, has been investigated. Methods/ Statistical analysis: The electromagnetic interaction of resonators with microstrip line is examined by simulating microstrip line loaded resonators inside a waveguide with High Frequency Structure Simulator(HFSS software). Findings: The magnetic resonance in SRR/SR loaded microstrip line shifts to lower frequency region due to loading. Further it is observed that resonant frequency shifts to lower frequency region to a great extent with SR loading as compared to SRR loading. Application/Improvements: The resonant frequency in SR loaded microstrip line is much less than resonant frequency of SRR loaded microstrip line. Hence SR loading can be used to design electrically small antennas.

Keywords

High Frequency Structure Simulator (HFSS), Magnetic resonance, Metamaterials (MTM), Microstrip Line, Split Ring Resonator (SRR), Spiral Resonator (SR).
User

Abstract Views: 139

PDF Views: 0




  • Magnetic Resonance of Microstrip Line Loaded with Split Ring Resonator and Spiral Resonator

Abstract Views: 139  |  PDF Views: 0

Authors

Rajni
Department of ECE, Shaheed Bhagat Singh State Technical Campus, Ferozepur - 152004, Punjab, India
Gurwinder Singh
Departmentof ECE, Government Polytechnic College, Ferozepur - 152002, Punjab, India
Anupma Marwaha
Department of ECE, Sant Longowal Institute of Engineering and Technology, Longowal (Sangrur) - 148106, Punjab, India

Abstract


Background/Objectives: In this paper, magnetic resonance of a microstrip line loaded with planar square split ring resonator (SRR) and spiral resonator (SR) structure, printed on Rogers RO3010 substrate, has been investigated. Methods/ Statistical analysis: The electromagnetic interaction of resonators with microstrip line is examined by simulating microstrip line loaded resonators inside a waveguide with High Frequency Structure Simulator(HFSS software). Findings: The magnetic resonance in SRR/SR loaded microstrip line shifts to lower frequency region due to loading. Further it is observed that resonant frequency shifts to lower frequency region to a great extent with SR loading as compared to SRR loading. Application/Improvements: The resonant frequency in SR loaded microstrip line is much less than resonant frequency of SRR loaded microstrip line. Hence SR loading can be used to design electrically small antennas.

Keywords


High Frequency Structure Simulator (HFSS), Magnetic resonance, Metamaterials (MTM), Microstrip Line, Split Ring Resonator (SRR), Spiral Resonator (SR).



DOI: https://doi.org/10.17485/ijst%2F2016%2Fv9i48%2F141102