Indian Journal of Science and Technology

Open Access Open Access  Restricted Access Subscription Access

A CFD Investigation of Mixing Profiles within a Micro-Coiled Flow Inverter


Affiliations
1 Faculty of Biosciences and Medical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Johor – 81300, Malaysia
 

Background/Objectives: Due to the low Reynolds number (Re) in microfluidic domain, the predominant laminar flow might inhibit effective mixing in micro-Coiled Flow Inverter (mCFI). Fluid dynamics within the mCFI was simulated with Computational Fluid Dynamics (CFD) software to investigate the mixing profile. Methods/Statistical Analysis: Fluid flow was simulated with the software FLUENT with Species Transport (ST) setting, to replicate the mixing of two water bodies. Geometry of the mCFI was designed with a tubing diameter of 0.5 mm and curvature ratio of λ = 10. Fluid flow rate was adjusted to attain 25≤ Re ≤ 250. Findings: A mixing time of 0.59s was achieved with Re = 250. However complete mixing was still achievable even in Re = 25 albeit with a longer mixing time. Application/Improvements: Flow inversion is improved the mixing condition in micro-structured tubing, in enhancement of the diffusive mixing in microfluidics.

Keywords

Flow Inversion and Computational Fluid Dynamics (CFD), Micro-Coiled Flow Inverter (Mcfi), Reynolds Number.
User

Abstract Views: 223

PDF Views: 0




  • A CFD Investigation of Mixing Profiles within a Micro-Coiled Flow Inverter

Abstract Views: 223  |  PDF Views: 0

Authors

Joanne Zi En Soh
Faculty of Biosciences and Medical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Johor – 81300, Malaysia
Eko Supriyanto
Faculty of Biosciences and Medical Engineering, Universiti Teknologi Malaysia, Johor Bahru, Johor – 81300, Malaysia

Abstract


Background/Objectives: Due to the low Reynolds number (Re) in microfluidic domain, the predominant laminar flow might inhibit effective mixing in micro-Coiled Flow Inverter (mCFI). Fluid dynamics within the mCFI was simulated with Computational Fluid Dynamics (CFD) software to investigate the mixing profile. Methods/Statistical Analysis: Fluid flow was simulated with the software FLUENT with Species Transport (ST) setting, to replicate the mixing of two water bodies. Geometry of the mCFI was designed with a tubing diameter of 0.5 mm and curvature ratio of λ = 10. Fluid flow rate was adjusted to attain 25≤ Re ≤ 250. Findings: A mixing time of 0.59s was achieved with Re = 250. However complete mixing was still achievable even in Re = 25 albeit with a longer mixing time. Application/Improvements: Flow inversion is improved the mixing condition in micro-structured tubing, in enhancement of the diffusive mixing in microfluidics.

Keywords


Flow Inversion and Computational Fluid Dynamics (CFD), Micro-Coiled Flow Inverter (Mcfi), Reynolds Number.



DOI: https://doi.org/10.17485/ijst%2F2017%2Fv10i7%2F150599