![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
Theoretical Study of a Thermal Photovoltaic Hybrid Solar Collector
Objectives: The purpose of this work is to determine and compare a PVT, PV panels and thermal collector’s theoretical performances. Methods/Statistical Analysis: These different performances had been determined by establishing thermal balances at different levels of the system. The obtained equations had been discretized; simplifying hypotheses had been issued to ease their resolution. We adopted the Cholesky method using MATLAB software to solve these equations. The electrical, thermal and global efficiencies had been obtained. Comparisons based on these results had been made on these different panels. Findings: The temperature evolution of the system shows a heat-up of the PV cells. In the other hand, a speed increase of the wind brings a cooling of the collector. The increase of the coolant flow implies a decrease of the coolant temperature. This parameter, usually downplayed, showed to be very important. The profile of power curves show that hybrid panel’s power is superior to simple PV panel and its thermal power is inferior to that of a thermal collector. However, the global efficiency of the hybrid panel is the highest. Most of these results confirm those of the literature while other results bring more information. Application/Improvements: Such a system could allow collecting the heat produced by the PV panels for water heating systems and more, with an optimization of the coolant flow for a better result.
User
Information
- Zondag HA, de Vries DW, vanHelden WGJ, van Zolingen RJC, van Steenhoven AA. The yield of different combined PV-thermal collector design. Solar Energy. 2003; 74(3): 253–269. https://doi.org/10.1016/S0038-092X(03)00121-X
- Touafek K, Malek A, Haddadi M. Etude expérimentale du capteur hybride photovoltaïque thermique. Revue des Energies Renouvelables. 2006; 9(13):143–54.
- Khelifa A, Touafek K. Etude de l’influence des paramètres externes et internes sur le capteur hybride Photovoltaïque Thermique (PVT). Revue des Energies Renouvelables. 2012; 15(11):67–75.
- Boulfaf N, Chaoufi J, Ghafiri A, Elorf A. Thermal Study of Hybrid Photovoltaic Thermal (PV-T) solar air collector using finiteelement method. International Journal of Renewable Energy Research. 2016; 6(1):1–12.
- Ghellab A, Kaabi A, Annane S, Brieche C. Les retombées technico-économiques d’un capteur hybride photovoltaïque/ thermique à air. Revue des Energies Renouvelables. 2013; 16(13):425–40.
- Jahromia SN, Vadiee A, Yaghoubi M. Exergy and economice valuation of a commercially available PV/T collector for different climates in Iran. Energy Procedia. 2015; 75: 444–56. https://doi.org/10.1016/j.egypro.2015.07.416
- Nougblega Y, Dupre JC, Atchonouglo K, Germaneau A, Hesser F, Banna M, Napo K, Chaoufi J, Vallée C et Straboni A. Conception et réalisation des capteurs hybrides photovoltaïquethermiques sous vide ou avec lame d’air confinée. Afrique Science. 2015; 11(12):12–23.
- Ben cheikh el Hocine H, Touafek K, Kerrour F, Haloui H et Khelifa A. Model validation of an empirical Photovoltaic Thermal (PV/T) collector. Energy Procedia. 2015; 74: 1090–9. https://doi.org/10.1016/j.egypro.2015. 07.749
- Bernard J. Energie solaire. Calculs et optimization. Paris: Ellipse; 2011. p. 1–283.
- Duffie JA, Beckman WA. Solar engineering of thermal processes. 4th ed. Hoboken, New Jersey: John Wiley & Sons Inc; 2013. p. 1–936. https://doi.org/10.1002/9781118671603 https://doi.org/10.1002/9781118671603.part1
- Tabet I. Étude, Réalisation et simulation d’un capteur solaire. Thèse de doctorat. Université des frères mentouri Constantine; 2016. p. 1–179.
![](https://i-scholar.in/public/site/images/abstractview.png)
Abstract Views: 241
![](https://i-scholar.in/public/site/images/pdfview.png)
PDF Views: 0