![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
Anatomical Structural Differences between Branch and Trunk in Ailanthus altissima Wood
Wood fiber dimensions such as length, diameter, lumen width, cell wall thickness, Runkel ratio, slenderness ratio, flexibility ratio of Ailanthus altissima were investigated from wood of trunk and branches. In trunk wood, the length, diameter, lumen width, cell wall thickness, Runkel ratio, slenderness ratio, flexibility ratio were 940±167, 22.8±4.63, 16.16±4.69, 3.34±1.18, 0.46±0.21, 42.97±11.57, 70.12±9.97 μm respectively, whereas for branch wood the corresponding values were 594±134, 17.81±3.53, 12.78±3.71, 2.49±0.6, 0.38±0.26, 35.31±11.03, 70.70±9.81 μm respectively. Fiber dimensions of A. altissima are in the normal range for hardwoods. The morphology of fibers and its fiber indices from the A. altissima wood is reasonably good for the purpose of paper manufacturing. The short length and thin walled fibers may be expected to give relatively dense papers which are weak in tearing strength, but are superior in burst and tensile properties.
Keywords
Ailanthus altissima , Wood Anatomy, Runkel Ratio
User
Information
- Alexander SD and Marton R (1968) Effect of beating and wet pressing on fiber and sheet properties. II. Sheet properties. Tappi. 51(6), 283-288.
- Annergren G, Rydholm S and Vardhelm S (1963) Influence of raw material and pulping process on the chemical composition and physical properties of paper pulps. Svensk Papperstidning. 66(6), 196-210.
- Arlov AP (1959) Load-elongation properties of paper sheets made from Bauer-McNett fractions of beaten sulfite pulp. Nor. Skogind. 13(10), 342-351.
- As N, Koc H, Dogu D, Atik C, Aksu B and Erdinler S (2002) The chemical mechanical, physical and anatomical properties of economically important wood in Turkey. IU Istanbul. J. For. pp: 70-88.
- Ashori A (2006a) Non-wood fibers – A potential source of raw material in papermaking. Polym-Plast Technol. Engg. J. 45(10), 1133–1136.
- Ashori A (2006b) Pulp and paper from kenaf bast fibers. Fibers Polym. J. 7(1), 26–29.
- Barefoot AC Hitchings RG and Ellwood EL (1964) Wood characteristics and kraft paper properties of four selected loblolly pines. Tappi. 47(6), 343,356.
- Bektas I, Tutus A and Eroglu H (1999) A study of the suitability of Calabrian pine (Pinus Brutiaten.) for pulp and paper manufacture. Turk. J. Agri. 23, 589-599.
- Copur Y, Guler C, Akgul M and Tascıoglu C (2007) some chemical properties of hazelnut husk and its suitability for particleboard production. Build Environ. 42(7), 2568–2572.
- Dadswell HE and Wardrop AB (1954) Growing trees with wood properties desirable for paper manufacture. Appita. 12(1), 129-136.
- Deniz I, Kirci H and Ates S (2004) Optimization of wheat straw triticum drums kraft pulping. Industrial Crops and Production. 19, 237-243.
- Enayati AA, Hamzeh Y, Mirshokraie A and Molaii M (2009) Papermaking potential of Canola stalks. Bioresources. 245-256.
- Franklin GL (1954) A rapid method for softening wood for anatomical analysis. Tropical Woods. 88, 35-36.
- Horn RA (1974) Morphology of wood pulp fiber from softwoods and Influence on paper strength. In: USDA For. Serv. Res. Pap. FPL 242. For. Prod. Lab, Madison, Wis.
- Kayama T (1979) Pulping and paper making properties and wood properties of tropical hardwoods. Forpride Dig. 8, 48-59.
- Khattak TM and Ghazi J (2001) Suitability of some non-commerical fast growing wood yielding trees growing in azad kashmir for the production of pulp and paper. Pak. J Bot. 33 (special issue).
- Law KN and Jiang X (2001) Comparative papermaking properties of oil-palm empty fruit bunch. TAPPI J. 84(1), 1-13.
- Stockmann VE (1971a) Effect of pulping on cellulose structure: Part I. A hypothesis of transformation fibrils. Tappi. 54(12), 2033-2037.
- Stockmann VE (1971b) Effect of pulping on cellulose structure: Part II. Fibrils contract longitudinally. Tappi. 54(12), 2038-2045.
- Talaeipour M, Hemmasi AH, Ebrahimpour Kasmani J, Mirshokraie A and Khademieslam H (2010) Effects of fungal treatment on structural and chemical features of Hornbeam chips. Bio Resources. 5(1), 477-487.
- Tutus A, Alma HM and Bektas I (2004) the effect of service age on various chemical properties of scots pine and crimean juniper wood used indoor constructions. Wood Res. 49(4), 25-31.
- Ververis C, Georghiou K, Christodoulakis N, Santas P and Santas R (2004) Fiber dimensions lignin and cellulose content of various plant materials and their suitability for paper production. Industrial Crops Production. 19, 245-254.
- Watson AJ and Dadswell HE (1964) Influence of fiber morphology on paper properties: 3. Length: diameter ratio. Appita. 17(8), 146-150.
- Xu F, Zhong XC, Sun RC and Lu Q (2006) Anatomy, ultra structure, and lignin distribution in cell wall of caragana korshinskii. Industrial Crops & Products. 24, 186-193.
![](https://i-scholar.in/public/site/images/abstractview.png)
Abstract Views: 433
![](https://i-scholar.in/public/site/images/pdfview.png)
PDF Views: 153