![Open Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextgreen.png)
![Restricted Access](https://i-scholar.in/lib/pkp/templates/images/icons/fulltextred.png)
A New Method to Recognize the Status of Sic Surge Arresters in Substations
SiC lightning arresters are a kind of lightning arresters that nowadays are substituted with new type such as ZnO lightning arrester. Nonetheless, many SiC lightning arresters in Iran's electricity networks are operating. For instance, all the medium voltage network lightning arresters of Bakhtar Regional Electrical Company (BREC) are SiC type. The company wants to exchange these lightning arresters, but due to high cost and numbers of these lightning arresters, it is decided to put them in suitable ranks up to a due time. Since all suggested tests for recognition of lightning arresters deficiency are laboratory tests and must be done in lab, it isn't possible for the company to transfer all lightning arresters from substation to lab. Therefore, it has been decided to carry out that in the substation. Accordingly, a project has been suggested and carried out by the writers of this paper and the present paper is the result of this project. Different theories in this paper are surveyed. DC test is introduced as a suitable way for correct recognition deficiency of lightning arresters. The acquired results of DC test on some samples of lightning arresters are in coordination with the standard tests that have been carried out in Pars High Voltage Lab. Finally, three groups of arresters are defined according to their operating condition which includes acting good, delayed acting and not operating arresters. According to this classification, BREC is capable to exchange the arresters with respect to condition of the related arrester and with an appropriate priority which is obtained from its condition.
Keywords
SiC Lightning Arrester, Electricity Network
User
Information
- Singh RP and Singh TVP (2002) Influence o pollution on the performance of metal oxide surge arresters. IEEE Conf. Elect & Com. Eng. 1, 224-229.
- Kanashiro H, Tatizawa M, Zanotti P, Futoshi Obase and Bacega WR (2009) Diagnostic of silicon carbide surge arresters. WSEAS TRANSACT. on SYSTEMS, 8 (12), 1284-1293.
- Grzybowski S and Gao G (1999) Evaluation of 15-420 kV substation lightning arresters after 25 years of service. Southeastcon 99. Proc. IEEE, pp: 333-336.
- Lenk (2010) Application considerations for gapped silicon-carbide arresters installed on utility high voltage systems; Part II: Energy Consumption. IEEE Conf. Transmission & Distribution Conf. & Exposition, 2010 IEEE PES. pp: 1-8.
- Darveniza M, Mercer DR and Watson RM (1996) An assessment of the reliability of in-service gapped silicon-carbide distribution surge arresters. IEEE Transact. on Power Delivery. 11(4), 1789-1797.
- Woodworth JJ (2010) Externally gapped line arrester a comprehensive review. IEEE Transmission & Distribution Conf. & Exposition. pp: 1-6.
- Burk JJ, Varneckas Chebli VE and Hoskey G (1991) Application of MOV and gappedarresters on non effectively grounded distribution systems. IEEE Transact. on Power Delivery. 6(2), 794-800.
- IEEE working group 3.4.11 (1992) Modeling of metal oxide surge arresters. IEEE Transact. on Power Delivery. 7(1),302-309.
- Pinceti P and Giannettoni M (1999) A simplified model for zinc oxide surge arrester. IEEE Transact. on Power Delivery.14(2),393-398.
- Fernandez R Diaz (2001) Metal oxide surge arrester model for fast transient simulations. Int. Conf. on Power System Transients, IPST’01, paper 144. pp: 20-24.
- Chrzan KL and Haddad A (2004) Behaviour of insulators and arresters at GlogÓw pollution test station. Int. Universities power Eng.Conf. pp:193-196.
- IEC standard 60099-1 (1999) Surge arresters - Part 1: Non-linear resistor type gapped surge arresters for a.c. systems. IEC standard.
- IEC Standard 60099-4 (2004) Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems. IEC Standard.
- Darveniza M and Mercer DR (1996) Service performance of distribution lightning arresters and transformers. Elect. Eng. Trans. Inst. Eng. Aust. EE2,97-112.
- Lat MVK and ortschinski J (1981) Distribution arrester research. IEEE Transaction on power apparatus and systems. PAS-100(7),3496-3505.
- American standard ANSI/IEEE C6201 (1967) lightning arresters for ac power circuits (being revised) Miller DB, Bo Fan H and Barnes PR (1991) The response of MOV and SiC arresters to steep- front longer duration current pulses. IEEE Transact. on Power Delivery. 6(2), 666-671.
![](https://i-scholar.in/public/site/images/abstractview.png)
Abstract Views: 503
![](https://i-scholar.in/public/site/images/pdfview.png)
PDF Views: 121