Indian Journal of Pure and Applied Physics

Open Access Open Access  Restricted Access Subscription Access

Design, Development and Metrological Investigation of a Trapezoidal-shaped Force Transducer


Affiliations
1 Department of Mechanical Engineering, National Institute of Technology Delhi, Delhi 110 040, India
2 Department of Mechanical Engineering, Indian Institute of Technology – Indian School of Mines, Dhanbad 826 004, India

This paper demonstrates the design and development of a trapezoidal-shaped force transducer with simple assembly to accommodate easy strain gauging on flat surfaces. Finite element analysis has been performed for computational studies. The design is validated based on experimental results. Force metrology has been discussed in detail following the standard procedures as per ISO 376: 2011. Metrological investigation for category D (includes reversibility and interpolation) shows that the proposed design of the force transducer, achieved class 0.5 standards of force transducers with uncertainty in the measurement of only up to 0.10 % or better throughout at a nominal capacity of 15 kN (tensile load). The methodology proposed here paves way for future efforts to develop miniaturized strain gauged force transducer for a wide range of micromachining and similar other precision engineering industrial applications. Force measurement is an integral part of various industrial applications that require installation of force transducers. Sometimes, these transducers are required for on-site calibration of large testing machines. So, the current research work discusses and describes the designing of dialgauge as well as strain-gauge arrangements of measuring of applied force
User
Notifications
Font Size

Abstract Views: 154




  • Design, Development and Metrological Investigation of a Trapezoidal-shaped Force Transducer

Abstract Views: 154  | 

Authors

Harish Kumar
Department of Mechanical Engineering, National Institute of Technology Delhi, Delhi 110 040, India
Richa Saxena
Department of Mechanical Engineering, Indian Institute of Technology – Indian School of Mines, Dhanbad 826 004, India
Sanjoy K Ghoshal
Department of Mechanical Engineering, Indian Institute of Technology – Indian School of Mines, Dhanbad 826 004, India

Abstract


This paper demonstrates the design and development of a trapezoidal-shaped force transducer with simple assembly to accommodate easy strain gauging on flat surfaces. Finite element analysis has been performed for computational studies. The design is validated based on experimental results. Force metrology has been discussed in detail following the standard procedures as per ISO 376: 2011. Metrological investigation for category D (includes reversibility and interpolation) shows that the proposed design of the force transducer, achieved class 0.5 standards of force transducers with uncertainty in the measurement of only up to 0.10 % or better throughout at a nominal capacity of 15 kN (tensile load). The methodology proposed here paves way for future efforts to develop miniaturized strain gauged force transducer for a wide range of micromachining and similar other precision engineering industrial applications. Force measurement is an integral part of various industrial applications that require installation of force transducers. Sometimes, these transducers are required for on-site calibration of large testing machines. So, the current research work discusses and describes the designing of dialgauge as well as strain-gauge arrangements of measuring of applied force