Indian Journal of Pure and Applied Physics

Open Access Open Access  Restricted Access Subscription Access

Temperature Dependence on Opto-Structural Parameters of Sol-Gel Derived Tin Doped Zirconia Nanoparticles


Affiliations
1 Department of Physics, Chaudhary Devi Lal University, Sirsa-125 055, Haryana, India
 

Recently, nanocrystalline zirconia was widely employed in photocatalytic applications.Tin doped zirconia nanoparticles were prepared by sol-gel process followed by spin coating technique. The as-produced powders and thin films were heat treated in air at 500, 650 and 800 °C for 2h. Structural parameters of annealed samples were characterized by X-ray diffraction and Fourier transformed infrared studies. XRD spectra revealed the mixed phases such as t-ZrO2, m-ZrO2 and o-ZrSnO4. Structural parameters viz. crystallite size, lattice constants, dislocation density, microstrain, orientation parameter and activation energy were evaluated. XRD data depicted that crystallite size increased, while lattice parameters slightly decreased with increase in annealing temperature. Expected functional groups were established by FTIR spectra. Optical parameters of nanopowders/thin films such as PL emission wavelength and optical band gap were determined by photoluminescence and UV-visible absorption. The energy band gaps of thin films were increased with increase in temperature. The emission peak exhibited a blue shift with increase in temperature. In addition, thermogravimetric-differential thermal analysis of as prepared sample was investigated.

Keywords

Nanoparicles, Sol-Gel, Annealing, Structural Parameters, Optical Parameters.
User
Notifications
Font Size

  • Lakshmi J S, Berlin I J, Thomas J K, Thomas P V & Joy K, IOP Conf Ser: Mater Sci Eng, 23 (2011) 012030.

  • Korotcenkov G, Sens Actuators B: Chem, 107 (2005) 209.

  • Korotcenkov G, Mater Sci Eng Rep, 61 (2008) 1.

  • Kim T W, Kwak J K, Park K H, Yun D Y, Lee D U, Son D I & Lee J Y, J Korean Phys Soc, 57 (2010) 1803.

  • Lai M, Lim J H, Mubeen S, Rheem Y, Mulchandani A, Deshusses M A & Myung N V, Nanotechnology, 20 (2009) 185602.

  • Bhaktha B S, Kinowski C, Bouazaoui M, Capoen B, Robbe-Cristini O, Beclin F & Turrell S, J Phys Chem C, 113 (2009) 21555.

  • Patil G E, Kajale D D, Chavan D N, Pawar N K, Ahire P T, Shinde S D & Jain G H Bullet Mater Sci, 34 (2011) 1.

  • Ji Z, He Z, Song Y, Liu K & Ye Z, J Cryst Growth, 259 (2003) 282.

  • Mondal S P, Ray S K, Ravichandran J & Manna I, Bullet Mater Sci, 33 (2010) 357.

  • Joy K, Lakshmy S S & Thomas P V, J Sol-gel Sci Technol, 61 (2012)179.

  • Joy K, Lakshmy S S, Nair P B & Daniel G P, J Alloys Compd, 512 (2012) 149.

  • John B I, Lakshmi J S, Sujatha L S, Daniel G P, Thomas P V & Joy K, J Sol-gel Sci Technol, 58 (2011) 669.

  • Zhao Y, Wang T, Zhang D, Fan S, Shao J & Fan Z, Appl Surf Sci, 239 (2005)171.

  • Anitha V S, Lekshmy S S & Joy K, J Mater Sci: Mater Electron, 24 (2013) 4340.

  • Štefanić G, Musić S & Ivanda M, Mater Res Bullet, 43 (2008)2855.

  • Culity B & Stock S, Elements of X-ray Diffraction, Addition-Wesley, Reading, (1978).

  • Williamson G K & Hall W H, Acta Metallurgica, 1 (1953) 22.

  • Howard C J, Hill R J & Reichert B E, Acta Crystal Sec B: Struct Sci, 44 (1988)116.

  • Maniv S Westwood W D & Colombini E, J Vacuum Sci Technol, 20 (1982) 162.

  • Srivastava A, Shukla R K & Misra K P, Cryst Res Technol, 46 (2011) 949.

  • Wang Y H & Li X P, Thin Solid Films, 250 (1994) 132.

  • Zhang Y U, Yang M I N, Dou X M, He H & Wang D S, Environ Sci Technol, 39 (2005)7246.

  • Matos J M E, Júnior F A, Cavalcante L S, Santos V, Leal S H, Júnior L S & Longo, E, Mater Chem Phys, 117 (2009) 455.

  • Hirata T, Asari E & Kitajima M, J Solid State Chem, 110 (1994) 201.

  • Ortiz A, Alonso J C & Haro-Poniatowski E, J Electron Mater, 34 (2005) 150.

  • Yan Y, Faber A J & De Waal H, J Non-Crystal Solids, 181 (1995) 283.

  • Hong R, Huang J, He H, Fan Z & Shao J, Appl Surf Sci, 242 (2005) 346.

  • Zhang J & Gao L, Mater Chem Phys, 87 (2004) 10.


Abstract Views: 100

PDF Views: 75




  • Temperature Dependence on Opto-Structural Parameters of Sol-Gel Derived Tin Doped Zirconia Nanoparticles

Abstract Views: 100  |  PDF Views: 75

Authors

Saruchi Rani
Department of Physics, Chaudhary Devi Lal University, Sirsa-125 055, Haryana, India
Surbhi Verma
Department of Physics, Chaudhary Devi Lal University, Sirsa-125 055, Haryana, India
Sushil Kumar
Department of Physics, Chaudhary Devi Lal University, Sirsa-125 055, Haryana, India

Abstract


Recently, nanocrystalline zirconia was widely employed in photocatalytic applications.Tin doped zirconia nanoparticles were prepared by sol-gel process followed by spin coating technique. The as-produced powders and thin films were heat treated in air at 500, 650 and 800 °C for 2h. Structural parameters of annealed samples were characterized by X-ray diffraction and Fourier transformed infrared studies. XRD spectra revealed the mixed phases such as t-ZrO2, m-ZrO2 and o-ZrSnO4. Structural parameters viz. crystallite size, lattice constants, dislocation density, microstrain, orientation parameter and activation energy were evaluated. XRD data depicted that crystallite size increased, while lattice parameters slightly decreased with increase in annealing temperature. Expected functional groups were established by FTIR spectra. Optical parameters of nanopowders/thin films such as PL emission wavelength and optical band gap were determined by photoluminescence and UV-visible absorption. The energy band gaps of thin films were increased with increase in temperature. The emission peak exhibited a blue shift with increase in temperature. In addition, thermogravimetric-differential thermal analysis of as prepared sample was investigated.

Keywords


Nanoparicles, Sol-Gel, Annealing, Structural Parameters, Optical Parameters.

References