Indian Journal of Pure and Applied Physics

Open Access Open Access  Restricted Access Subscription Access

Influence of Various Parameters on the Triboelectric Generation of Bulk Materials


Affiliations
1 Department of Physics & i-4 Center, Deshbandhu College, University of Delhi, New Delhi 110 019, India
 

In this paper we report the study of mechanical energy harvesting of ambient energy based on triboelectric effect. We choose the bulk form of poly-tetrafluoroethylene (PTFE) as electronegative (E-) material and human hand and plywood as the electropositive (E+) materials, respectively making a single electrode based triboelectric generator (TEG). The E+ and E-material were rubbed together to produce a voltage output, which was measured by using a sensitive electrometer. Thisinvestigation was carried out for different surface morphology, surface areas of contact, thickness and types of electrodecontacts and rubbing frequency. It was observed that sufficient voltage and charge generation was achieved to power lowenergy devices like LED bulbs, with the highest voltage generation of ~6.2 V for rectangular PTFE sheet, having onesurface coated with a thin film of copper for making electrode and other one is made rough using sandpaper, as theE-material and plywood as the E+ material. We observed that the voltage output is influenced by the surface morphology,type of E+ material for the same E- material, frequency of rubbing strokes and frictional area of contact.

Keywords

Triboelectric effect; PTFE; Bulk materials.
User
Notifications
Font Size

  • Choudhary A, Joshi T & Biradar A M, Appl Phys Lett, 97 (2010) 124108.

  • Kumar A, Choudhary A, Saxena A, Gahlot A P S, Berwal G, Rohit, Kumar S, Tiwari S J, Singh D P, Agrawal D, Kumar V & Upreti V, DU J Undergrad Res Innovat, 2 (2016) 49.

  • Fan F R, Tian Z Q & Wang Z L, Nano Energy, 1 (2012) 328.

  • Davies D K, J Phys D Appl Phys, 2 (1969) 1533.

  • Horn R G & Smith D T, Science, 256 (1992) 362.

  • Zou H, Zhang Y, Guo L, Wang P, He X, Dai G, Zheng H, chen C, Wang A C, Xu C & Wang Z L, Nat Commun, 10 (2019) 1427.

  • Henniker J, Nature, 196 (1962) 474.

  • Godwinraj D & George S C, Adv Ind Eng Polym Res, 4 (2021) 1.

  • Lin Z, Chen J & Yang J, J Nanomater, 2016 (2016) 5651613.

  • Li W, Pei Y, Zhang C & Kottapalli A G P, Nano Energy, 84 (2021) 105865.

  • Zhou Y, Deng W, Xu J & Chen J, Cell Rep Phys Sci, 1 (2020) 100142.

  • Walden R, Kumar C, Mulvihill D M & Pillai S C, Chem Eng J Adv, 9 (2022) 100237.

  • Meng B, Tang W, Too Z, Zhang X, Han M, Liu W & Zhang H, Energy Environ Sci, 6 (2013) 3235.

  • Xu Y, Min G, Gadegaard N, Dahiya R & Mulvihill D M, Nano Energy, 76 (2020) 105067.

  • Wang Z L, Nano Energy, 68 (2020) 104272.

  • Lacy F, Nanoscale Res Lett, 6 (2011) 636.

  • Hojabri A, Hajakbari F, Moazzen M A M & Kadkhodaei, J Nanostruct, 2 (2012) 107.


Abstract Views: 91

PDF Views: 45




  • Influence of Various Parameters on the Triboelectric Generation of Bulk Materials

Abstract Views: 91  |  PDF Views: 45

Authors

Aditya Saxena
Department of Physics & i-4 Center, Deshbandhu College, University of Delhi, New Delhi 110 019, India
Amit Choudhary
Department of Physics & i-4 Center, Deshbandhu College, University of Delhi, New Delhi 110 019, India
U. P. Tyagi
Department of Physics & i-4 Center, Deshbandhu College, University of Delhi, New Delhi 110 019, India
Monika Sharma
Department of Physics & i-4 Center, Deshbandhu College, University of Delhi, New Delhi 110 019, India

Abstract


In this paper we report the study of mechanical energy harvesting of ambient energy based on triboelectric effect. We choose the bulk form of poly-tetrafluoroethylene (PTFE) as electronegative (E-) material and human hand and plywood as the electropositive (E+) materials, respectively making a single electrode based triboelectric generator (TEG). The E+ and E-material were rubbed together to produce a voltage output, which was measured by using a sensitive electrometer. Thisinvestigation was carried out for different surface morphology, surface areas of contact, thickness and types of electrodecontacts and rubbing frequency. It was observed that sufficient voltage and charge generation was achieved to power lowenergy devices like LED bulbs, with the highest voltage generation of ~6.2 V for rectangular PTFE sheet, having onesurface coated with a thin film of copper for making electrode and other one is made rough using sandpaper, as theE-material and plywood as the E+ material. We observed that the voltage output is influenced by the surface morphology,type of E+ material for the same E- material, frequency of rubbing strokes and frictional area of contact.

Keywords


Triboelectric effect; PTFE; Bulk materials.

References