Power Research

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Application of Mathematical Interpolation Technique in Nano Based Insulating Mineral Oil


Affiliations
1 EE Department, National Institute of Technology, Durgapur, India
2 Ph.D. Full-time Research Scholar, EE Department, National Institute of Technology, Durgapur, India
3 High Voltage and Insulation Laboratory, EE Department, National Institute of Technology, Durgapur, India
4 Dielectric Materials Division, Central Power Research Institute, Bangalore, India
     

   Subscribe/Renew Journal


In general, insulating oil serves as an insulation and cooling medium of power transformers and different High Voltage (HV) application. The properties of insulating oil like breakdown voltage (BDV), viscosity, flash point and fire point are enhanced by adding of different additives in an optimal way. In this work, a mathematical model has been developed by using Lagrange interpolation technique for predicting the critical properties values in different volume concentrations (in Vol %). The predicted critical properties are compared with the set of measured data. Based on this approach, accuracy of predicted value has been obtained in between the two available measured data in two known different volume concentrations. From the volume concentrations (0-0.01%), the error seems to be negligible. Hence, Lagrange interpolation technique is considered as a reliable technique for predicting the intermediate value for different concentrations of nano powder doped insulating oil used in different HV power apparatus.

Keywords

Insulating Oil, Critical Parameters, Interpolation Technique, Nanofluids.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Yuzhen lv, you Zhou, Chengrong Li, “Recent Progress in Nanofluids Based on Transformer Oil:Preparation and Electrical Insulation Properties”, IEEE Electr. Insul. Magaz. Vol. 30, No.5, pp. 23-32, 2014.

  • A. Raymon, S. Sakthibalan, C. Cinthal, R. Subramaniaraja and M. Yuvaraj, “Enhancement and Comparison of Nanoester Insulating Fluids”, IEEE Trans. on Dielectr. and Electr. Insul. Vol. 23, No. 2 pp. 892-900, 2016

  • Donglin Liu, Yuanxiang Zhou, Ying Yang, Ling Zhang and Fubao Jin, “Characterization of High Performance AlN NanoparticleBased Transformer Oil Nanofluids”, IEEE Trans. on Dielectr. and Electr. Insul. Vol. 23, No. 5 pp. 2757-2767, 2016

  • Yuefan Du, Yuzhen Lv, Chengrong Li, Mutian Chen, Yuxiang Zhong, Jianquan Zhou, Xiaoxin Li and You Zhou, “Effect of Semiconductive Nanoparticles on Insulating Performances of Transformer Oil”, IEEE Trans. on Dielectr. and Electr. Insul. Vol. 19, No. 3 pp. 770-776, 2012

  • A. Raymon, P. Samuel Pakianathan, M. P. E.Rajamani and R. Karthik, “Enhancing the CriticalCharacteristics of Natural Esters with Antioxidantfor Power Transformer Applications”, IEEETrans. on Dielectr. and Electrl. Insul.Vol. 20, No. 3, pp.899-912, 2013.

  • R.T. Arun Ram Prasath, Nirmal Kumar Roy, Sankar Narayan Mahato and P. Thomas, “Mineral Oil Based High Permittivity CaCu3Ti4O12 (CCTO) Nanofluids for Power Transformer Application”, IEEE Trans.on Dielectr. and Electr. Insul. Vol. 24, No.4, pp. 2344-2353 2017.

  • Erik Meijering, “A Chronology of Interpolation: From Ancient Astronomy to Modern Signal and Image Processing”, Proceedings of the IEEE, vol. 90, no. 3, pp. 319-342 2002.

  • Steven C. Chapra, “Applied Numerical Methods”, Publisher Tata McGraw-Hill.

  • Lavrane V. Fausett, “Applied Numerical Analysis Using Matlab”, Publisher Pearson.

  • ASTM D877/D877-16, “Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes”, 2017

  • ASTM D445-17, “Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids and Calculation of Dynamic Viscosity”, 2017.

  • ASTM D92-16b “Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester”, 2017.


Abstract Views: 267

PDF Views: 0




  • Application of Mathematical Interpolation Technique in Nano Based Insulating Mineral Oil

Abstract Views: 267  |  PDF Views: 0

Authors

Aditya Prakash Mishra
EE Department, National Institute of Technology, Durgapur, India
R. T. Arun Ram Prasath
Ph.D. Full-time Research Scholar, EE Department, National Institute of Technology, Durgapur, India
Sankar Narayan Mahato
EE Department, National Institute of Technology, Durgapur, India
Nirmal Kumar Roy
High Voltage and Insulation Laboratory, EE Department, National Institute of Technology, Durgapur, India
P. Thomas
Dielectric Materials Division, Central Power Research Institute, Bangalore, India

Abstract


In general, insulating oil serves as an insulation and cooling medium of power transformers and different High Voltage (HV) application. The properties of insulating oil like breakdown voltage (BDV), viscosity, flash point and fire point are enhanced by adding of different additives in an optimal way. In this work, a mathematical model has been developed by using Lagrange interpolation technique for predicting the critical properties values in different volume concentrations (in Vol %). The predicted critical properties are compared with the set of measured data. Based on this approach, accuracy of predicted value has been obtained in between the two available measured data in two known different volume concentrations. From the volume concentrations (0-0.01%), the error seems to be negligible. Hence, Lagrange interpolation technique is considered as a reliable technique for predicting the intermediate value for different concentrations of nano powder doped insulating oil used in different HV power apparatus.

Keywords


Insulating Oil, Critical Parameters, Interpolation Technique, Nanofluids.

References





DOI: https://doi.org/10.33686/prj.v13i4.189215