Power Research

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Multiple feedback-control-loops for single-phase full-bridge PWM inverter


Affiliations
1 Associate Professor, Department of Electrical & Electronics Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore – 575 025, India
2 PG Student, Associate Professor, Department of Electrical & Electronics Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore – 575 025, India
     

   Subscribe/Renew Journal


This paper presents a multiple feedback-loop-control technique for a single-phase full-bridge PWM inverter with output LC filter. The main challenge for an Uninterruptible Power Supply (UPS) is to maintain a high quality sinusoidal voltage under non-linear load conditions as most of the electronic loads are non-linear in nature and for that it needs to be controlled. Multiple feedback consists of two control-loops; one for capacitor voltage and other for inductor current-control. Output voltage and load curren-feedforward-control is used. This technique reduces the distortion in the inverter output voltage and brings it closer to a sine wave. The control concept has been verified using Matlab/SimulinkTM toolbox and the simulation results are obtained with different types of loads.

Keywords

UPS, analog control, feed forward control.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 255

PDF Views: 0




  • Multiple feedback-control-loops for single-phase full-bridge PWM inverter

Abstract Views: 255  |  PDF Views: 0

Authors

Jora M. Gonda
Associate Professor, Department of Electrical & Electronics Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore – 575 025, India
A. Londhe Apurva
PG Student, Associate Professor, Department of Electrical & Electronics Engineering, National Institute of Technology Karnataka, Surathkal, Mangalore – 575 025, India

Abstract


This paper presents a multiple feedback-loop-control technique for a single-phase full-bridge PWM inverter with output LC filter. The main challenge for an Uninterruptible Power Supply (UPS) is to maintain a high quality sinusoidal voltage under non-linear load conditions as most of the electronic loads are non-linear in nature and for that it needs to be controlled. Multiple feedback consists of two control-loops; one for capacitor voltage and other for inductor current-control. Output voltage and load curren-feedforward-control is used. This technique reduces the distortion in the inverter output voltage and brings it closer to a sine wave. The control concept has been verified using Matlab/SimulinkTM toolbox and the simulation results are obtained with different types of loads.

Keywords


UPS, analog control, feed forward control.



DOI: https://doi.org/10.33686/prj.v12i1.189300