Power Research

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Characteristics of Different Indonesian Coals Blended with a High Ash Indian Coal


Affiliations
1 SRF, Materials Technology Division, Central Power Research Institute, Bengaluru-560080, India
2 Joint Director, Materials Technology Division, Central Power Research Institute, Bengaluru-560080, India
3 Additional Director (Retd.), Materials Technology Division, Central Power Research Institute, Bengaluru-560080, India
     

   Subscribe/Renew Journal


Two Indonesian coals from different mines were blended with a high ash representative Indian coal obtained from South Eastern Coalfield Limited (SECL) mines at different proportions like 10/90, 20/80, 30/70 and 50/50. These blends were characterized for the qualitative and quantitative parameters based on additive rule. The additive/non-additive behavior of these blend proportions were studied comparing the experimentally obtained value with the calculated values based on additive rule. The results obtained indicate that the quantitative parameters like proximate and ultimate parameters were found to be additive and the qualitative parameters like ash fusion temperature and Hardgrove Grindability Index (HGI) were found to have deviation from the calculated values. Among the two different blends one blend showed additive characteristics on the HGI values while the other one showed non-additive characteristics. The Ash Fusion Temperature (AFT) was found to be non-additive in both the blends.

Keywords

Two Indonesian coals from different mines were blended with a high ash representative Indian coal obtained from South Eastern Coalfield Limited (SECL) mines at different proportions like 10/90, 20/80, 30/70 and 50/50. These blends were characterized for the qualitative and quantitative parameters based on additive rule. The additive/non-additive behavior of these blend proportions were studied comparing the experimentally obtained value with the calculated values based on additive rule. The results obtained indicate that the quantitative parameters like proximate and ultimate parameters were found to be additive and the qualitative parameters like ash fusion temperature and Hardgrove Grindability Index (HGI) were found to have deviation from the calculated values. Among the two different blends one blend showed additive characteristics on the
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 228

PDF Views: 0




  • Characteristics of Different Indonesian Coals Blended with a High Ash Indian Coal

Abstract Views: 228  |  PDF Views: 0

Authors

K. H. Arun Kumar
SRF, Materials Technology Division, Central Power Research Institute, Bengaluru-560080, India
V. Saravanan
Joint Director, Materials Technology Division, Central Power Research Institute, Bengaluru-560080, India
M. Shekhar Kumar
Additional Director (Retd.), Materials Technology Division, Central Power Research Institute, Bengaluru-560080, India

Abstract


Two Indonesian coals from different mines were blended with a high ash representative Indian coal obtained from South Eastern Coalfield Limited (SECL) mines at different proportions like 10/90, 20/80, 30/70 and 50/50. These blends were characterized for the qualitative and quantitative parameters based on additive rule. The additive/non-additive behavior of these blend proportions were studied comparing the experimentally obtained value with the calculated values based on additive rule. The results obtained indicate that the quantitative parameters like proximate and ultimate parameters were found to be additive and the qualitative parameters like ash fusion temperature and Hardgrove Grindability Index (HGI) were found to have deviation from the calculated values. Among the two different blends one blend showed additive characteristics on the HGI values while the other one showed non-additive characteristics. The Ash Fusion Temperature (AFT) was found to be non-additive in both the blends.

Keywords


Two Indonesian coals from different mines were blended with a high ash representative Indian coal obtained from South Eastern Coalfield Limited (SECL) mines at different proportions like 10/90, 20/80, 30/70 and 50/50. These blends were characterized for the qualitative and quantitative parameters based on additive rule. The additive/non-additive behavior of these blend proportions were studied comparing the experimentally obtained value with the calculated values based on additive rule. The results obtained indicate that the quantitative parameters like proximate and ultimate parameters were found to be additive and the qualitative parameters like ash fusion temperature and Hardgrove Grindability Index (HGI) were found to have deviation from the calculated values. Among the two different blends one blend showed additive characteristics on the



DOI: https://doi.org/10.33686/prj.v12i3.189343