Power Research

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

A Study of Boost Converter with Solar Photovoltaic System for Maximum Energy Efficiency


Affiliations
1 Junior Research Fellow, EATD, Central Power Research Institute, Bangalore-560080, India
2 Principal, Sir M Visvesvaraya Institute of Technology, Bangalore-562 157, India
3 Electrical Appliances Technology Division, Central Power Research Institute, Bangalore-560080, India
4 Energy Efficiency and Renewable Energy Division, Central Power Research Institute, Bangalore-560080, India
     

   Subscribe/Renew Journal


Performance of a SPV system is dependent on temperature, array configuration, solar insolation, shading etc. The conversion of solar energy using SPV modules,change in insolation conditions which severely affect the efficiency and output power of the modules. Improvement in the efficiency of conversion of solar energy can be done by tracking the maximum power point of a PV module. Various types of MPPT charge controllers are available in the market. A dc-dc converter is an important component of a SPV system as it acts as an interface between the load and the SPV module. These dc-dc converters enhance the performance of the MPPT algorithms leading to an improvement in the overall efficiency of the SPV system. This paper presents the modeling and simulation of one diode equivalent circuit of solar photovoltaic module using MATLAB/SIMULINKTM along with the boost converter which gives an efficiency of 93.29%.

Keywords

Maximum Power Point Tracking (MPPT), Solar Photovoltaic (SPV) Characteristics, Boost Converter
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 251

PDF Views: 0




  • A Study of Boost Converter with Solar Photovoltaic System for Maximum Energy Efficiency

Abstract Views: 251  |  PDF Views: 0

Authors

Sudhakar H. S.
Junior Research Fellow, EATD, Central Power Research Institute, Bangalore-560080, India
Indira M. S.
Principal, Sir M Visvesvaraya Institute of Technology, Bangalore-562 157, India
Gujjala B. Balaraju
Electrical Appliances Technology Division, Central Power Research Institute, Bangalore-560080, India
Siddhartha Bhatt M.
Energy Efficiency and Renewable Energy Division, Central Power Research Institute, Bangalore-560080, India

Abstract


Performance of a SPV system is dependent on temperature, array configuration, solar insolation, shading etc. The conversion of solar energy using SPV modules,change in insolation conditions which severely affect the efficiency and output power of the modules. Improvement in the efficiency of conversion of solar energy can be done by tracking the maximum power point of a PV module. Various types of MPPT charge controllers are available in the market. A dc-dc converter is an important component of a SPV system as it acts as an interface between the load and the SPV module. These dc-dc converters enhance the performance of the MPPT algorithms leading to an improvement in the overall efficiency of the SPV system. This paper presents the modeling and simulation of one diode equivalent circuit of solar photovoltaic module using MATLAB/SIMULINKTM along with the boost converter which gives an efficiency of 93.29%.

Keywords


Maximum Power Point Tracking (MPPT), Solar Photovoltaic (SPV) Characteristics, Boost Converter



DOI: https://doi.org/10.33686/prj.v11i1.189388