Power Research

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Performance Evaluation of VSC-HVDC Link for Varying AC System Strengths


Affiliations
1 Power Systems Division, Central Power Research Institute, Bengaluru – 560080, Karnataka, India
2 Department of Electrical and Electrinics Engineering, Ramaiah Institute of Technology, Bengaluru – 560054, Karnataka, India
3 Department of Electrical and Electronics Engineering, Acharya Institute of Technology, Bengaluru – 560107, Karnataka, India
     

   Subscribe/Renew Journal


Strength of the AC system is one of the important parameters that govern performance of HVDC systems. Even though VSC-HVDC is known to have fewer problems compared to LCC-HVDC at lower system strengths, it is still the topic of research. This paper presents a detailed analysis on the modelling and tuning of the control system of a VSC-HVDC system for varied AC system strengths. Emphasis has been on the tuning of control system parameters considering the effect of AC system strength to improve the transient response of the VSC-HVDC system. A combination of control schemes consisting of DC voltage and AC voltage control at the rectifier and inverter end have been considered. The control parameters are tuned with symmetrical and modulus optimum criteria and found that tuning method is working for weak systems. The VSC-HVDC system is modelled in RSCAD software of RTDS.

Keywords

AC Voltage Control, Active and Reactive Power Control, DC Voltage Control, Proportional Integral (PI), Short Circuit Ratio (SCR) Words, Source Impedance, VSC - HVDC
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 259

PDF Views: 0




  • Performance Evaluation of VSC-HVDC Link for Varying AC System Strengths

Abstract Views: 259  |  PDF Views: 0

Authors

J. Sreedevi
Power Systems Division, Central Power Research Institute, Bengaluru – 560080, Karnataka, India
V. Anuradha
Department of Electrical and Electrinics Engineering, Ramaiah Institute of Technology, Bengaluru – 560054, Karnataka, India
Premila Manohar
Department of Electrical and Electrinics Engineering, Ramaiah Institute of Technology, Bengaluru – 560054, Karnataka, India
R. S. Shivakumara Aradhya
Department of Electrical and Electronics Engineering, Acharya Institute of Technology, Bengaluru – 560107, Karnataka, India

Abstract


Strength of the AC system is one of the important parameters that govern performance of HVDC systems. Even though VSC-HVDC is known to have fewer problems compared to LCC-HVDC at lower system strengths, it is still the topic of research. This paper presents a detailed analysis on the modelling and tuning of the control system of a VSC-HVDC system for varied AC system strengths. Emphasis has been on the tuning of control system parameters considering the effect of AC system strength to improve the transient response of the VSC-HVDC system. A combination of control schemes consisting of DC voltage and AC voltage control at the rectifier and inverter end have been considered. The control parameters are tuned with symmetrical and modulus optimum criteria and found that tuning method is working for weak systems. The VSC-HVDC system is modelled in RSCAD software of RTDS.

Keywords


AC Voltage Control, Active and Reactive Power Control, DC Voltage Control, Proportional Integral (PI), Short Circuit Ratio (SCR) Words, Source Impedance, VSC - HVDC



DOI: https://doi.org/10.33686/pwj.v14i1.142192