Power Research

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Vibrational Power Generation on High Ways using Piezoelectric Crystal


Affiliations
1 EEE, Kurinji College of Engineering and Technology, Manapparai, Trichy - 621307, Tamil Nadu, India
     

   Subscribe/Renew Journal


The vehicle pressures are enormously wasted in the densely populated country like India and china. Piezoelectric crystal can change the vehicle pressure in to electrical power. The pressure obtained by the vehicle tyre is used for power generation even through, which is not constant some delay may occur due to time difference between each vehicle. Piezoelectric sensors are placed on the right track on the high ways. Pressure varies for each vehicle. In order to maintain the constant regulated voltage. We place Cuk converter and a battery backup. Cuk converter will provide a constant voltage. Which is fed to the three phase inverter act as the DC to AC converter? Utilize those powers for the government office, street lighting, traffic lighting, check post lighting, and pumps for gardening in high ways etc. Simulation work is done by using MATLAB. The three phase output is obtained by effective utilization of Cuk converter and inverter. Continuous conduction mode (CCM) can be obtained by using battery backup.

Keywords

Continuous Conduction Mode (CCM), Current Sensor, MATLAB, Piezoelectric Sensor, Pressure, Rechargeable Battery, Stress, Vibration, Voltage Sensor.
User
Subscription Login to verify subscription
Notifications
Font Size

  • Asha A, Joy J, Sreekalpa S, Sujith S, Ramakrishnan R. Power generation through human locomotion. Journal of Electronics and Communication Systems. 2016; 1(1):1-9.

  • Dey M, Akand T, Sultana S. Proceedings of 2015 3rd International Conference on Advances in Electrical Engineering; Dhaka, Bangladesh; 2015 Dec 17-19.

  • Nisanth A, Suja KJ, Seena V. Design and simulation of MEMS AlN piezoelectric vibration energy harvester array for improved power density. IEEE SENSORS Conference; New Delhi, India; 2018. https://doi.org/10.1109/ICSENS.2018.8589700

  • Ghosh J, Sen S, Saha A, Basak S. Electrical power generation using foot step for urban area energy applications. 2013 International Conference on Advances in Computing, Communications and Informatics; Mysore, India; 2013. 978-1-4673-6217- 7/13/_c 2013 IEEE. https://doi.org/10.1109/ICACCI.2013.6637377

  • Ferin G, Hoang T, Bantignies C, Le Khanh H, Flesch E, Nguyen-Dinh A. Powering autonomous wireless sensors with miniaturized piezoelectric based energy harvesting devices for NDT applications. 2015 IEEE International Ultrasonics Symposium; Taipei, Taiwan; 2015. https://doi.org/10.1109/ULTSYM.2015.0534

  • Zouari M, Naifar S, Götz M, Derbel N, Kanoun O. An optimized self-powered P-SSHI circuit for piezoelectric energy harvesting. 2017 IEEE International Instrumentation and Measurement Technology Conference; Turin, Italy; 2017. 978-1-5090-3596-0/17/ ©2017 IEEE. https://doi.org/10.1109/I2MTC.2017.7969755

  • Triono AD, Limantara AD, Mudjanarko SW. Utilization of pedestrian movement on the sidewalk as a source of electric power for lighting using piezoelectric censors; Conference: 2018 3rd IEEE International Conference on Intelligent Transportation Engineering; 2018. 978-1-5386-7831-2/18/ ©2018 IEEE https://doi.org/10.1109/ICITE.2018.8492624


Abstract Views: 302

PDF Views: 0




  • Vibrational Power Generation on High Ways using Piezoelectric Crystal

Abstract Views: 302  |  PDF Views: 0

Authors

M. Vijay Anand
EEE, Kurinji College of Engineering and Technology, Manapparai, Trichy - 621307, Tamil Nadu, India
J. Amala Arocikaraj
EEE, Kurinji College of Engineering and Technology, Manapparai, Trichy - 621307, Tamil Nadu, India
A. Priya Fatima Rani
EEE, Kurinji College of Engineering and Technology, Manapparai, Trichy - 621307, Tamil Nadu, India

Abstract


The vehicle pressures are enormously wasted in the densely populated country like India and china. Piezoelectric crystal can change the vehicle pressure in to electrical power. The pressure obtained by the vehicle tyre is used for power generation even through, which is not constant some delay may occur due to time difference between each vehicle. Piezoelectric sensors are placed on the right track on the high ways. Pressure varies for each vehicle. In order to maintain the constant regulated voltage. We place Cuk converter and a battery backup. Cuk converter will provide a constant voltage. Which is fed to the three phase inverter act as the DC to AC converter? Utilize those powers for the government office, street lighting, traffic lighting, check post lighting, and pumps for gardening in high ways etc. Simulation work is done by using MATLAB. The three phase output is obtained by effective utilization of Cuk converter and inverter. Continuous conduction mode (CCM) can be obtained by using battery backup.

Keywords


Continuous Conduction Mode (CCM), Current Sensor, MATLAB, Piezoelectric Sensor, Pressure, Rechargeable Battery, Stress, Vibration, Voltage Sensor.

References





DOI: https://doi.org/10.33686/pwj.v15i1.148405