Power Research

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Thermal Lifetime Estimation of EVA Encapsulants from Activation Energy based Method


Affiliations
1 Cable and Diagnostics Division, Central Power Research Institute, Bangalore – 560080, Karnataka, India
     

   Subscribe/Renew Journal


A rapid test method based on a logarithmic degradation model for the lifetime assessment of ethylene-vinyl acetate (EVA) used as encapsulants in Photovoltaic (PV) module is proposed. In general, encapsulants are used in widely varied conditions. However, factors such as voltage stress, irradiation, mechanical shock and vibration, environmental conditioning and chemical contamination should be evaluated. In the present study evaluation is carried on the dumbbell specimens of encapsulating material itself and is based on the percentage of reduction in the property i.e elongation percentage, which is a destructive test. Dumb-bell specimens as per ISO 37:2011(E) standard are employed. Adequate number of test specimens were subjected to thermal aging at three different temperatures 35 °C, 45 °C and 55 °C. The conditioned specimens after removing from oven were stored in decicator prior to testing i.e. while the specimens were attaining room temperature. The constant factors of the life time line a and b were calculated, and finally, the lifetime values were estimated.

Keywords

: Elongation Percentage, Ethylene-Vinyl Acetate (EVA), Lifetime Estimation, Photovoltaic Solar Cell
User
Subscription Login to verify subscription
Notifications
Font Size

  • King DL, Quintana MA, Kratochvil J, Ellibee D, Hansen B. Photovoltaic module performance and durability following long- term field exposure. Progress in Photovoltaics: Research and Applications; 2000; 8:241–56. https://doi.org/10.1002/(SICI)1099-159X(200003/04)8:2<241::AIDPIP290> 3.0.CO;2-D

  • BGI Research, Ethylene vinyl acetate (EVA) global market to 2015 - photovoltaic encapsulants to drive EVA demand in the future; 2011.

  • Agroui K, Maallemi A, Boumaour M, Collins G, Salama M. Thermal stability of slow and fast cure EVA encapsulant material for photovoltaic module manufacturing process. Solar Energy Materials and Solar Cells. 2006; 90(15):2509– 14. https://doi.org/10.1016/j.solmat.2006.03.023

  • Cuddihy E, Carroll W, Coulbert C, Gupta A, Liang R. Photovoltaic encapsulation design and material selection; 1982. https://doi.org/10.2172/5356871

  • IEC 60216-1:2013, Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results.

  • IEC 60216-3:2006, Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics


Abstract Views: 147

PDF Views: 0




  • Thermal Lifetime Estimation of EVA Encapsulants from Activation Energy based Method

Abstract Views: 147  |  PDF Views: 0

Authors

Moumita Naskar
Cable and Diagnostics Division, Central Power Research Institute, Bangalore – 560080, Karnataka, India
H. M. Dharmendra
Cable and Diagnostics Division, Central Power Research Institute, Bangalore – 560080, Karnataka, India
K. P. Meena
Cable and Diagnostics Division, Central Power Research Institute, Bangalore – 560080, Karnataka, India

Abstract


A rapid test method based on a logarithmic degradation model for the lifetime assessment of ethylene-vinyl acetate (EVA) used as encapsulants in Photovoltaic (PV) module is proposed. In general, encapsulants are used in widely varied conditions. However, factors such as voltage stress, irradiation, mechanical shock and vibration, environmental conditioning and chemical contamination should be evaluated. In the present study evaluation is carried on the dumbbell specimens of encapsulating material itself and is based on the percentage of reduction in the property i.e elongation percentage, which is a destructive test. Dumb-bell specimens as per ISO 37:2011(E) standard are employed. Adequate number of test specimens were subjected to thermal aging at three different temperatures 35 °C, 45 °C and 55 °C. The conditioned specimens after removing from oven were stored in decicator prior to testing i.e. while the specimens were attaining room temperature. The constant factors of the life time line a and b were calculated, and finally, the lifetime values were estimated.

Keywords


: Elongation Percentage, Ethylene-Vinyl Acetate (EVA), Lifetime Estimation, Photovoltaic Solar Cell

References





DOI: https://doi.org/10.33686/prj.v17i1.221902