Open Access
Subscription Access
Open Access
Subscription Access
Pre Qualification Test on 220 KV Cable System – CPRI Experience
Subscribe/Renew Journal
With the development of XLPE cables and associated accessories up to 500 kV voltage level, XLPE Cable Systems are becoming the main back bone of the Power Distribution and Transmission system. The basic requirement of power cable is that it shall withstand the electrical, thermal, mechanical and environmental stresses imposed on it during its expected life of 25 to 35 years. Generally the development of cable for EHV applications is achieved through increased stress design, which demands very stringent quality requirements during production of cables and development of accessories. Since different designs are available for cables and accessories, it is essential to carry out long duration test to establish their compatibility and reliability. IEC 62067 for extra High voltage Cable accessories have incorporated the pre-qualification tests to check the long term reliability of the cable system in service before installation. This paper highlights the details of Pre qualification test on 220 KV Cable system conducted at CPRI for the first time in India.
Keywords
EHV XLPE Cable, Electrical Stresses, Mechanical Stresses, Pre Qualification Test, Thermal Stresses
User
Subscription
Login to verify subscription
Font Size
Information
- IEC 62067-2011 -Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) – Test methods and requirements.
- IEC 60840-2020 - Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) – Test methods and requirements.
- Rao BN. Power cables laboratory “contribution towards research and testing in the CPRI golden jubilee period. 2011.
- Jahromi AN. Load cycling test of high voltage cables and accessoires. IEEE Electrical Insulation Magazine. 2011; 27(5):14–28.
Abstract Views: 146
PDF Views: 0