Open Access
Subscription Access
Open Access
Subscription Access
Development of a Tape Winding Mechanism for HTS Power Cables
Subscribe/Renew Journal
Manufacturing of HTS power cables requires winding the HTS tapes helically around a former. These HTS tapes are costly, and delicate and require sophisticated winding machinery which is expensive. In this paper, an in-house economic mechanism for converting a conventional lathe machine to a Tape Winding Mechanism (TWM) is discussed in detail. In addition to the developed prototype, the technical issues and challenges encountered during the development of TWM are listed. The developed TWM was instrumental in successfully winding 10 HTS tapes simultaneously around a tin-coated braided copper former of 19 mm diameter with a pitch length of 210 mm for a continuous length of 5 m HTS cable. The recommendation of modifying any existing cable winding machine to TWM is also discussed.
Keywords
HTS Power Cables, HTS Tapes, Pitch Angle, Pitch Length, Tape Winding Mechanism.
User
Subscription
Login to verify subscription
Font Size
Information
- Yumura H, Ashibe Y, Itoh H, Ohya M, Watanabe M, Masuda T, Weber CS. Phase II of the Albany HTS cable project. IEEE Transactions on Applied Superconductivity. 2009; 19(3):1698-701. https://doi.org/10.1109/TASC.2009. 2017865 DOI: https://doi.org/10.1109/TASC.2009.2017865
- Masuda T, Yumura H, Watanabe M, Takigawa H, Ashibe Y, Suzawa C, Ito H, Hirose M, Sato K, Isojima S Weber C. Fabrication and installation results for Albany HTS cable. IEEE Transactions on Applied Superconductivity. 2007; 17(2):1648-51. https://doi.org/10.1109/TASC.2007.898122 DOI: https://doi.org/10.1109/TASC.2007.898122
- Kim DW, Jang, HM Lee CH, Kim JH, Ha CW, Kwon YH, Kim DW, Cho JW. Development of the 22.9-kV class HTS power cable in LG cable. IEEE Transactions on Applied Superconductivity. 2005; 15(2):1723-26. https://doi.org/10.1109/TASC.2005.849266 DOI: https://doi.org/10.1109/TASC.2005.849266
- Anand A, Nayek S, Gour AS, Rao VV. IV characterization of HTS tape under tensile stress using cryogenic UTM along with FEM analysis. Indian Journal of Cryogenics. 2020; 45(1):130-33. https://doi.org/10.5958/2349-2120.2020.00 022.9 DOI: https://doi.org/10.5958/2349-2120.2020.00022.9
- Gerhold J, Tanaka T. Cryogenic electrical insulation of superconducting power transmission lines: Transfer of experience learned from metal superconductors to high critical temperature superconductors. Cryogenics. 1998; 38(11):1173-88. https://doi.org/10.1016/S0011-2275(98)00105-2 DOI: https://doi.org/10.1016/S0011-2275(98)00105-2
- Yu T, Shi Y, He X, Kang C, Deng B. Modeling and optimization of interlaminar bond strength for composite tape winding process. Journal of Reinforced Plastics and Composites. 2017; 36(8):579-92. https://doi.org/10.1177/0731684416685415 DOI: https://doi.org/10.1177/0731684416685415
- Costello GA. Theory of wire rope. Springer Science & Business Media; 1997. https://doi.org/10.1007/978-1-4612- 1970-5
Abstract Views: 242
PDF Views: 0