Open Access Open Access  Restricted Access Subscription Access

Design and Experiment of Rotating Fluid Flow in a Tesla Disc Turbine


Affiliations
1 Mechanical Engineering Department, MCKV Institute of Engineering, Liluah, Howrah - 711204, West Bengal, India
 

Turbine discs were designed and building a prototype to improve the efficiency of the working fluid in Tesla turbines. The fluid flow field within tesla disc turbine have been investigated experimentally. The turbine is a bladeless centripetal and tangential flow turbine. The turbine runs by the principle of momentum transfer by developing a boundary layer on the smooth surfaces of the disks. Circular nozzles were analyzed using air as the working fluid and flow taken to be incompressible, turbulent and non-reacting. Different inlet velocity ranging from 20.0 to 70.0 m/s has been investigated. In the range investigated the lower velocity did not influenced the performance. Paper will develop an adequate design of nozzles contribute to increase the overall yield of a Tesla turbine.

Keywords

Design, Nozzle, Tesla Disc, Turbine, Velocity.
User
Notifications
Font Size

  • Guha A, Smiley B. Experiment and analysis for an improved design of the inlet and nozzle in Tesla disc turbines. ProcIMechE Part A: J Power Energy. 2010; 224:261–77.

  • Guha A. A unified theory for the interpretation of total pressure and temperature in two-phase flows at subsonic and supersonic speeds. Proc R Soc. 1998; 454:671–95. Available from http://dx.doi.org/10.1098/ rspa.1998.0180.

  • Guha A. Computation, analysis and theory of twophase flows. Aeronaut J. 1998; 102(1012):71–82. 1. Tesla N. Turbine. US Pat. 1 061 206; 1913.

  • Dijkstra D, Van Heijst GJF. The flow between two finite rotating disks enclosed by a cylinder. J Fluid Mech. 1983; 128:123–54.

  • Zhou M, Garner CP, Reeves M. Numerical modelling and particle image velocimetry measurement of the laminar flow field induced by an enclose drotating disc. Int J Numer Methods Fluids. 1996; 22:283–96.

  • Sandilya P, Biswas G, Rao DP, Sharma A. Numerical simulation of the gas flow and mass transfer between two coaxially rotating disks. Numer Heat Transfer. 2001; 39(A):285–305.

  • Andersson HI, Rousselet M. Slip flow over a lubricated rotating disk. Int J Heat Mass Transfer. 2006; 27:329–35.

  • Rice W. Tesla turbomachinary. International Nikola Tesla Symposium; 1991; Colorado Springs, Colorado, Anais.

  • Schmidt DD. Biomass boundary layer turbine power system, energy innovations small grant program, EISG Final Report, California Energy Commission. 2002.

  • Bloudicek P, Palousek D. Design of Tesla turbine. Konference Diplomovy´ chPrací Republic Czech; 2007; Anais.

  • Lemma E, Deam RT, Toncich D, Collins R. Characterisation of a small viscous flow turbine. Exp Thermal Fluid Sci. 2008; 33.

  • Engin T, Oezdemir M, Cesmeci S. Design, testing and two-dimensional flowmodeling of a multiple-disk fan. Exp Thermal Fluid Sci. 2009; 33(8):1180–7.

  • Guha A, Smiley B. Experiment and analysis for an improved design of the inletand nozzle in Tesla disc turbines. Proc Inst Mech Eng Part a J. Power Energy. 2010; 224(A2):261–77.

  • Sengupta S, Guha A. A theory of Tesla disc turbines. Proc IMechE Part A: J Power and Energy. 2012; 226(5):650–63.


Abstract Views: 855

PDF Views: 727




  • Design and Experiment of Rotating Fluid Flow in a Tesla Disc Turbine

Abstract Views: 855  |  PDF Views: 727

Authors

Suvanjan Bhattacharyya
Mechanical Engineering Department, MCKV Institute of Engineering, Liluah, Howrah - 711204, West Bengal, India
Anindya Guin Ayan Haldar
Mechanical Engineering Department, MCKV Institute of Engineering, Liluah, Howrah - 711204, West Bengal, India
Samir Kumar Saha
Mechanical Engineering Department, MCKV Institute of Engineering, Liluah, Howrah - 711204, West Bengal, India

Abstract


Turbine discs were designed and building a prototype to improve the efficiency of the working fluid in Tesla turbines. The fluid flow field within tesla disc turbine have been investigated experimentally. The turbine is a bladeless centripetal and tangential flow turbine. The turbine runs by the principle of momentum transfer by developing a boundary layer on the smooth surfaces of the disks. Circular nozzles were analyzed using air as the working fluid and flow taken to be incompressible, turbulent and non-reacting. Different inlet velocity ranging from 20.0 to 70.0 m/s has been investigated. In the range investigated the lower velocity did not influenced the performance. Paper will develop an adequate design of nozzles contribute to increase the overall yield of a Tesla turbine.

Keywords


Design, Nozzle, Tesla Disc, Turbine, Velocity.

References