Current Science

Open Access Open Access  Restricted Access Subscription Access

Coal dust monitoring and computational simulations of dust dispersion in continuous miner development heading through auxiliary ventilation systems


Affiliations
1 Department of Mining Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad 826 004, India
 

Dispersing coal dust to a safe level near the mining face is of utmost importance for maintaining a safe and healthy workplace environment in any mine. The huge amount of coal dust generated during coal winning near a mine development heading is generally dispersed through auxiliary ventilation systems. In this study, dispersion of coal dust in a continuous miner development heading was analysed with five different auxiliary ventilation systems through computational fluid dynamics simulations, and their efficacy of dust dispersal to a safe level was compared. The dust concentration in the heading developed by continuous miner was monitored by a Grimm aerosol spectrometer. The k–e turbulence model was used to perform 3D computational simulations utilizing real mine data. This study provided an insight into the dispersion behaviour of coal dust in the development heading with diverse auxiliary ventilation systems. The line brattice system proved to be the most effective means of dust dispersion. Nonetheless, better dispersion of coal dust in the development heading was achieved at line brattice distances of 0.75 and 1.0 m from the side wall.

Keywords

Auxiliary ventilation systems, coal dust, computational simulation, development headings, dispersion, line brattice, underground coal mines.
User
Notifications
Font Size

  • Chen, H., Feng, Q., Long, R. and Qi, H., Focusing on coal miners’ occupational disease issues: a comparative analysis between China and the United States. Saf. Sci., 2013 51, 217–222; https://doi.org/ 10.1016/j.ssci.2012.06.025.

  • Ebadat, V., Dust explosion hazard assessment. J. Loss Prev. Process Ind., 2010, 23, 907–912; https://doi.org/10.1016/j.jlp.2010.05.006.

  • Abbasi, T. and Abbasi, S. A., Dust explosions – cases, causes, consequences and control. J. Hazard. Mater., 2007, 140, 7–44; https://doi.org/10.1016/j.jhazmat.2006.11.007.

  • Cashdollar, K. L., Coal dust explosibility. J. Loss Prev. Process Ind., 1996, 9, 65–76.

  • Cashdollar, K. L., Overview of dust explosibility characteristics. J. Loss Prev. Process Ind., 2000, 13, 183–199.

  • Sapko, M. J., Cashdollar, K. L. and Green, G. M., Coal dust particle size survey of US mines. J. Loss Prev. Process Ind., 2007, 20, 616–620; https://doi.org/10.1016/j.jlp.2007.04.014.

  • Ramlu, M. A., Mine Disasters and Mine Rescue, University Press (India), Hyderabad, 2007, 2nd edn.

  • Kaku, L. C., Coal Mines Regulation, Lovely Prakasham, Dhanbad, India, 2017, 1st edn.

  • Misra, G. B., Mine Environment and Ventilation, Oxford University Press, New Delhi, 1986, 13th edn.

  • Banerjee, S. P., Mine Ventilation, Lovely Prakasham, Dhanbad, India, 2003, 1st edn.

  • McPherson, M. J., Subsurface Ventilation and Environmental Engineering, Springer, London, UK, 1993.

  • Kurnia, J. C., Agus, S. and Arun, M., Dust dispersion and management in underground mining faces. Int. J. Min. Sci. Technol., 2014, 24, 39–44; https://doi.org/10.1016/j.ijmst.2013.12.007.

  • Mishra, D. P., Sahu, A. and Panigrahi, D. C., Design of auxiliary ventilation system for effective dust dispersion in underground coal mine development heading – a computational simulation approach. In Proceedings of the 11th International Mine Ventilation Congress (ed. Chang, X.), Science Press and Springer Nature Singapore, 2019, pp. 146–158; https://doi.org/https://doi.org/10.1007/978-981-13-1420-9_13.

  • Wei, N., Zhongan, J. and Dongmei, T., Numerical simulation of the factors influencing dust in drilling tunnels: its application. Min. Sci. Technol., 2011, 21, 11–15; https://doi.org/10.1016/ j.mstc.2010.12.009.

  • Torano, J., Torno, S., Menéndez, M. and Gent, M., Auxiliary ventilation in mining roadways driven with roadheaders: validated CFD modelling of dust behaviour. Tunn. Undergr. Space Technol., 2011, 26, 201–210; https://doi.org/10.1016/j.tust.2010.07.005.

  • Kurnia, J. C., Agus, S., Hassani, F. P. and Arun, M., Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: a computational study. Int. J. Min. Sci. Technol., 2015, 25, 537–543; https://doi.org/10.1016/j.ijmst.2015.05.004.

  • Tariq, F. and Bekir, G., Evaluation of line brattice length in an empty heading to improve air flow rate at the face using CFD. Int. J. Min. Sci. Technol., 2017, 27, 253–259; https://doi.org/10.1016/j.ijmst.2017.01.012.

  • Hargreaves, D. M. and Lowndes, I. S., The computational modeling of the ventilation flows within a rapid development drivage. Tunn. Undergr. Space Technol., 2007, 22, 150–160; https://doi.org/10.1016/j.tust.2006.06.002.

  • Geng, F., Luo, G., Wang, Y., Peng, Z., Hu, S., Zhang, T. and Chai, H., Dust dispersion in a coal roadway driven by a hybrid ventilation system: a numerical study. Process Saf. Environ. Prot., 2018, 113, 388–400; https://doi.org/10.1016/j.psep.2017.11.010.

  • Gautam, S., Prusty, B. K. and Patra, A. K., Dispersion of respirable particles from the workplace in opencast iron ore mines. Environ. Technol. Innov., 2015, 4, 137–149.

  • Gorner, P., Simon, X., Bemer, D. and Liden, G., Workplace aerosol mass concentration measurement using optical particle counters. J. Environ. Monit., 2012, 14, 420–428.

  • ANSYS FLUENT 13.0, Theory guide, Ansys Inc., USA, 2010, 0-752.

  • Ansys Fluent 15.0, User’s guide, Ansys Inc., USA, 2010, 0-2334.


Abstract Views: 361

PDF Views: 153




  • Coal dust monitoring and computational simulations of dust dispersion in continuous miner development heading through auxiliary ventilation systems

Abstract Views: 361  |  PDF Views: 153

Authors

Aashish Sahu
Department of Mining Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad 826 004, India
Devi Prasad Mishra
Department of Mining Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad 826 004, India

Abstract


Dispersing coal dust to a safe level near the mining face is of utmost importance for maintaining a safe and healthy workplace environment in any mine. The huge amount of coal dust generated during coal winning near a mine development heading is generally dispersed through auxiliary ventilation systems. In this study, dispersion of coal dust in a continuous miner development heading was analysed with five different auxiliary ventilation systems through computational fluid dynamics simulations, and their efficacy of dust dispersal to a safe level was compared. The dust concentration in the heading developed by continuous miner was monitored by a Grimm aerosol spectrometer. The k–e turbulence model was used to perform 3D computational simulations utilizing real mine data. This study provided an insight into the dispersion behaviour of coal dust in the development heading with diverse auxiliary ventilation systems. The line brattice system proved to be the most effective means of dust dispersion. Nonetheless, better dispersion of coal dust in the development heading was achieved at line brattice distances of 0.75 and 1.0 m from the side wall.

Keywords


Auxiliary ventilation systems, coal dust, computational simulation, development headings, dispersion, line brattice, underground coal mines.

References





DOI: https://doi.org/10.18520/cs%2Fv122%2Fi4%2F419-428