Indian Welding Journal

Open Access Open Access  Restricted Access Subscription Access
Open Access Open Access Open Access  Restricted Access Restricted Access Subscription Access

Predicting the Effects of Process Parameters on Weld Bead Geometry in Mig Welding using ANN


Affiliations
1 Kushtia Polytechnic Institute, Kushtia, Bangladesh
2 Department of Mechanical Engineering, Khulna University of Engineering and Technology, Khulna, Bangladesh
3 Department of Electrical and Electronic Engineering, Khulna University of Engineering and Technology, Khulna, Bangladesh
     

   Subscribe/Renew Journal


Bead-on-plate experiments were conducted using a semi-automatic MIG welding machine to determine the effects of process parameters like wire diameter, wire feed rate, welding current, welding speed etc. on weld bead geometry like bead height, bead width, depth of penetration etc. An artificial neural network based modeling had successfully been done to correlate the effects of process parameters on weld bead geometry.
User
Subscription Login to verify subscription
Notifications
Font Size

Abstract Views: 480

PDF Views: 4




  • Predicting the Effects of Process Parameters on Weld Bead Geometry in Mig Welding using ANN

Abstract Views: 480  |  PDF Views: 4

Authors

Subrata Saha
Kushtia Polytechnic Institute, Kushtia, Bangladesh
Naseem Ahmed
Department of Mechanical Engineering, Khulna University of Engineering and Technology, Khulna, Bangladesh
Md. Abdur Rafiq
Department of Electrical and Electronic Engineering, Khulna University of Engineering and Technology, Khulna, Bangladesh
Tarapada Bhowmick
Department of Mechanical Engineering, Khulna University of Engineering and Technology, Khulna, Bangladesh

Abstract


Bead-on-plate experiments were conducted using a semi-automatic MIG welding machine to determine the effects of process parameters like wire diameter, wire feed rate, welding current, welding speed etc. on weld bead geometry like bead height, bead width, depth of penetration etc. An artificial neural network based modeling had successfully been done to correlate the effects of process parameters on weld bead geometry.


DOI: https://doi.org/10.22486/iwj%2F2014%2Fv47%2Fi3%2F141128